Nissan Tiida C11. Instruction — part 236
DLK-354
< COMPONENT DIAGNOSIS >
[WITH I-KEY & SUPER LOCK]
INSIDE KEY ANTENNA
With CONSULT-III
1.
Check “ANTENNA” in “Active Test” mode with CONSULT-III.
2.
Touch “ROOM ANT 1”.
3.
When Intelligent Key is in inside front console antenna detection area, hazard lamps flash.
Is the inspection result normal?
YES
>> Front console antenna is OK.
NO
>> Refer to
DLK-354, "CONSOLE : Diagnosis Procedure"
CONSOLE : Diagnosis Procedure
INFOID:0000000001530354
1.
CHECK INSIDE KEY ANTENNA INPUT SIGNAL 1
1.
Turn ignition switch OFF.
2.
Check signal between Intelligent Key unit connector and ground
with oscilloscope.
Test Item
Inside Antenna
ANTENNA
:ROOM ANT 1
Front console antenna
ALKIA0784ZZ
INSIDE KEY ANTENNA
DLK-355
< COMPONENT DIAGNOSIS >
[WITH I-KEY & SUPER LOCK]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
Is the inspection result normal?
YES
>> GO TO 4.
NO
>> GO TO 2.
2.
CHECK INSIDE KEY ANTENNA CIRCUIT
1.
Disconnect Intelligent Key unit connector and inside key antenna (console) connector.
2.
Check continuity between Intelligent Key unit connector (A) M52
terminals 35, 36 and inside key antenna (console) connector (B)
M45 terminals 1, 2.
Terminal
Condition
Signal
(Reference value)
(+)
(–)
Intelligent Key unit
connector
Terminal
M52
Console
(+)
35
Ground
• All doors are
closed
• Ignition knob
switch is pressed
When Intelligent Key
is in the antenna de-
tection area.
When Intelligent Key
is not in the antenna
detection area.
Console
(-)
36
When Intelligent Key
is in the antenna de-
tection area.
When Intelligent Key
is not in the antenna
detection area.
JMKIA0393ZZ
JMKIA0391ZZ
JMKIA0392ZZ
JMKIA0390ZZ
ALKIA0588ZZ
DLK-356
< COMPONENT DIAGNOSIS >
[WITH I-KEY & SUPER LOCK]
INSIDE KEY ANTENNA
3.
Check continuity between Intelligent Key unit connector and ground.
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> Repair or replace harness between Intelligent Key unit and inside key antenna (console).
3.
CHECK INSIDE KEY ANTENNA INPUT SIGNAL 2
1.
Replace inside key antenna. (New antenna or other antenna)
2.
Connect Intelligent Key unit connector and inside key antenna (console) connector.
3.
Check signal between Intelligent Key connector and ground with
oscilloscope.
Intelligent Key unit
connector
Terminal
Inside key antenna (console)
connector
Terminal
Continuity
M52
35
B45
1
Yes
36
2
Intelligent Key unit connector
Terminal
Ground
Continuity
M52
35
No
36
ALKIA0784ZZ
INSIDE KEY ANTENNA
DLK-357
< COMPONENT DIAGNOSIS >
[WITH I-KEY & SUPER LOCK]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
Is the inspection result normal?
YES
>> Replace inside key antenna (console). Refer to
XX-XX, "*****"
(console).
NO
>> GO TO 4.
4.
CHECK INTERMITTENT INCIDENT
Refer to @@@.
>> INSPECTION END
REAR FLOOR
REAR FLOOR : Description
INFOID:0000000001530355
Detects whether Intelligent Key is inside the vehicle.
REAR FLOOR : Component Function Check
INFOID:0000000001530356
1.
CHECK INSIDE KEY ANTENNA INPUT SIGNAL
Terminal
Condition
Signal
(Reference value)
(+)
(–)
Intelligent Key unit
connector
Terminal
M52
Console
(+)
35
Ground
• All doors are
closed
• Ignition knob
switch is pressed
When Intelligent Key is
in the antenna detec-
tion area.
When Intelligent Key is
not in the antenna de-
tection area.
Console
(-)
36
When Intelligent Key is
in the antenna detec-
tion area.
When Intelligent Key is
not in the antenna de-
tection area.
JMKIA0393ZZ
JMKIA0391ZZ
JMKIA0392ZZ
JMKIA0390ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст