Nissan Tiida C11. Instruction — part 282
DLK-538
< COMPONENT DIAGNOSIS >
[WITHOUT I-KEY & SUPER LOCK]
TRUNK LID OPENER ACTUATOR
3.
Check continuity between BCM connector (A) M20 terminal 68 and ground.
Is the inspection result normal?
YES
>> Refer to
DLK-538, "Component Inspection"
.
NO
>> Repair or replace harness.
3.
CHECK TRUNK LID OPENER ACTUATOR GROUND CIRCUIT
Check continuity between trunk lamp switch and trunk release sole-
noid connector and ground.
Is the inspection result normal?
YES
>> GO TO 4
NO
>> Repair or replace trunk lamp switch and trunk release solenoid ground circuit.
4.
CHECK INTERMITTENT INCIDENT
Refer to
XX-XX, "*****"
.
>> INSPECTION END.
Component Inspection
INFOID:0000000001530665
1.
CHECK TRUNK LAMP SWITCH
Momentarilly, connect battery power supply to trunk lamp switch and
trunk release solenoid terminals and check for solenoid operation.
BCM connector
Terminal
trunk lamp switch and trunk re-
lease solenoid connector
Terminal
Continuity
M20
68
B66
2
Yes
BCM connector
Terminal
Continuity
M20
68
Ground
No
ALKIA0763ZZ
Trunk lamp switch and trunk release
solenoid connector
Terminal
Ground
Continuity
B66
1
Yes
ALKIA0767ZZ
TRUNK LID OPENER ACTUATOR
DLK-539
< COMPONENT DIAGNOSIS >
[WITHOUT I-KEY & SUPER LOCK]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
Is the inspection result normal?
YES
>> INSPECTION END.
NO
>> Replace trunk lamp switch and trunk release solenoid.
Terminal
Trunk condition
Trunk lamp switch and trunk release solenoid
1 BAT (-)
2 BAT (+)
Solenoid operates
DLK-540
< COMPONENT DIAGNOSIS >
[WITHOUT I-KEY & SUPER LOCK]
BUZZER (COMBINATION METER)
BUZZER (COMBINATION METER)
Description
INFOID:0000000001397088
Performs operation method guide and warning with buzzer.
Component Function Check
INFOID:0000000001397089
1.
CHECK FUNCTION
With CONSULT-III
Check the operation with “INSIDE BUZZER” in “Active Test”.
Is the inspection result normal?
Yes
>> Warning buzzer in combination meter is OK.
No
>> Refer to
DLK-540, "Diagnosis Procedure"
.
Diagnosis Procedure
INFOID:0000000001397090
1.
CHECK BUZZER (COMBINATION METER) CIRCUIT
Refer to
XX-XX, "*****"
.
Is the inspection result normal?
Yes
>> GO TO 2.
No
>> Repair or replace buzzer (combination meter) circuit.
2.
CHECK INTERMITTENT INCIDENT
Refer to @@@.
>> INSPECTION END
Test item
Condition
INSIDE BUZZER
:TAKE OUT
Take away warning chime sounds
:KNOB
Ignition knob switch warning chime sounds
:KEY
Key warning chime sounds
HAZARD WARNING LAMPS
DLK-541
< COMPONENT DIAGNOSIS >
[WITHOUT I-KEY & SUPER LOCK]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
HAZARD WARNING LAMPS
Description
INFOID:0000000001397091
Performs answer-back for each operation with the number of blinks.
Component Function Check
INFOID:0000000001397092
1.
CHECK FUNCTION
With CONSULT-III
Check hazard warning lamp “FLASHER” in “Active Test” mode.
Is the inspection result normal?
YES
>> Hazard warning lamp circuit is OK.
NO
>> Refer to
DLK-541, "Diagnosis Procedure"
Diagnosis Procedure
INFOID:0000000001397093
1.
CHECK HAZARD SWITCH CIRCUIT
Check hazard switch circuit.
Refer to
XX-XX, "*****"
.
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Repair or replace hazard warning switch circuit.
2.
CHECK INTERMITTENT INCIDENT
Refer to @@@.
>> INSPECTION END
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст