Nissan Tiida C11. Instruction — part 1083
MWI-22
< FUNCTION DIAGNOSIS >
DIAGNOSIS SYSTEM (METER)
5.
Each meter activates while pressing odo/trip meter switch. (At this time, the low-fuel warning lamp turns
off, low water temperature indicator lamp and high water temperature warning lamp turn on.)
NOTE:
If any of the meter and gages are not activated, replace combination meter. Refer to
CONSULT-III Function (METER/M&A)
INFOID:0000000001374682
CONSULT-III can display each diagnostic item using the diagnostic test modes shown following.
SELF-DIAG RESULTS
Display Item List
.
DATA MONITOR
Display Item List
X: Applicable
AWNIA0164ZZ
METER/M&A diagnosis mode
Description
SELF-DIAG RESULTS
Displays combination meter self-diagnosis results.
DATA MONITOR
Displays combination meter input/output data in real time.
CAN DIAG SUPPORT MNTR
The result of transmit/receive diagnosis of CAN communication can be read.
Display item [Unit]
MAIN
SIGNALS
SELECTION
FROM MENU
Description
SPEED METER [km/h] or [mph]
X
X
Displays the value of vehicle speed signal.
SPEED OUTPUT [km/h] or [mph]
X
X
Displays the value of vehicle speed signal, which is transmitted to
each unit with CAN communication.
TACHO METER [rpm]
X
X
Displays the value of engine speed signal, which is input from ECM.
W TEMP METER [
°
C] or [
°
F]
X
X
Displays the value of engine coolant temperature signal, which is in-
put from ECM.
FUEL METER [lit.]
X
X
Displays the value, which processes a resistance signal from fuel
gauge.
DISTANCE [km] or [mile]
X
X
Displays the value, which is calculated by vehicle speed signal, fuel
gauge and fuel consumption from ECM.
FUEL W/L [ON/OFF]
X
X
Displays [ON/OFF] condition of low-fuel warning lamp.
C-ENG W/L [ON/OFF]
X
Displays [ON/OFF] condition of malfunction indicator lamp.
SEAT BELT W/L [ON/OFF]
X
Indicates [ON/OFF] condition of seat belt warning lamp.
BUZZER [ON/OFF]
X
X
Displays [ON/OFF] condition of buzzer.
MWI
DIAGNOSIS SYSTEM (METER)
MWI-23
< FUNCTION DIAGNOSIS >
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
NOTE:
Some items are not available due to vehicle specification.
*: The monitor will indicate “OFF” even though the brake warning lamp is on if either of the following conditions exist.
• The parking brake is engaged
• The brake fluid level is low
DOOR W/L [ON/OFF]
X
Displays [ON/OFF] condition of door warning lamp.
HI-BEAM IND [ON/OFF]
X
Displays [ON/OFF] condition of high beam indicator.
TURN IND [ON/OFF]
X
Displays [ON/OFF] condition of turn indicator.
FR FOG IND
X
Displays [ON/OFF] condition of front fog lamp indicator.
RR FOG IND
X
Displays [ON/OFF] condition of rear fog lamp indicator.
OIL W/L [ON/OFF]
X
Displays [ON/OFF] condition of oil pressure warning lamp.
LIGHT IND
X
Displays [ON/OFF] condition of exterior lamp indicator.
VDC/TCS IND [ON/OFF]
X
Displays [ON/OFF] condition of VDC OFF indicator lamp.
ABS W/L [ON/OFF]
X
Displays [ON/OFF] condition of ABS warning lamp.
SLIP IND [ON/OFF]
X
Displays [ON/OFF] condition of SLIP indicator lamp.
BRAKE W/L [ON/OFF]
X
Displays [ON/OFF] condition of brake warning lamp.*
OIL LEVEL IND
X
Displays [ON/OFF] condition of oil level indicator.
KEY G W/L [ON/OFF]
X
Displays [ON/OFF] condition of key green warning lamp.
KEY R W/L [ON/OFF]
X
Displays [ON/OFF] condition of key red warning lamp.
KEY KNOB W/L [ON/OFF]
X
Displays [ON/OFF] condition of key knob warning lamp.
PNP P SW
X
X
Displays [ON/OFF] condition of inhibitor P switch.
PNP N SW
X
X
Displays [ON/OFF] condition of inhibitor N switch.
O/D OFF SW
X
Displays [ON/OFF] condition of O/D OFF switch.
BRAKE SW [ON/OFF]
X
Displays [ON/OFF] condition of parking brake switch.
P RANGE IND [ON/OFF]
X
X
Displays [ON/OFF] condition of A/T shift P range indicator.
R RANGE IND [ON/OFF]
X
X
Displays [ON/OFF] condition of A/T shift R range indicator.
N RANGE IND [ON/OFF]
X
X
Displays [ON/OFF] condition of A/T shift N range indicator.
D RANGE IND [ON/OFF]
X
X
Displays [ON/OFF] condition of A/T shift D range indicator.
2 RANGE IND [ON/OFF]
X
X
Displays [ON/OFF] condition of A/T shift 2 range indicator.
1 RANGE IND [ON/OFF]
X
X
Displays [ON/OFF] condition of A/T shift 1range indicator.
O/D OFF W/L
X
Displays [ON/OFF] condition of O/D OFF indicator lamp.
CRUISE IND [ON/OFF]
X
Displays [ON/OFF] condition of CRUISE indicator.
EPS W/L
X
Displays [ON/OFF] condition of EPS warning lamp.
Display item [Unit]
MAIN
SIGNALS
SELECTION
FROM MENU
Description
MWI-24
< COMPONENT DIAGNOSIS >
DTC U1000 CAN COMMUNICATION
COMPONENT DIAGNOSIS
DTC U1000 CAN COMMUNICATION
DTC Logic
INFOID:0000000001374683
DTC DETECTION LOGIC
Diagnosis Procedure
INFOID:0000000001374684
Symptom: Displays “CAN COMM CIRC [U1000]” as a self-diagnosis result of combination meter.
1.
CHECK CAN COMMUNICATION
Select “SELF-DIAG RESULTS” mode for “METER/M&A” with CONSULT-III.
>> Go to “LAN system”. Refer to
LAN-22, "Trouble Diagnosis Flow Chart"
.
DTC
CONSULT-III display
Detection condition
U1000
CAN COMM CIRC
[U1000]
When combination meter is not receiving CAN communication signals for 2 seconds or more.
MWI
DTC B2205 VEHICLE SPEED CIRCUIT
MWI-25
< COMPONENT DIAGNOSIS >
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
DTC B2205 VEHICLE SPEED CIRCUIT
Description
INFOID:0000000001374685
The ABS actuator and electric unit (control unit) provides a vehicle speed signal to the combination meter via
CAN communication lines.
DTC Logic
INFOID:0000000001374686
Diagnosis Procedure
INFOID:0000000001374687
Symptom: Displays “VEHICLE SPEED CIRC [B2205]” as a self-diagnosis result of combination meter.
1.
CHECK COMBINATION METER INPUT SIGNAL
1.
Start engine and select “METER/M&A” on CONSULT-III.
2.
Using “SPEED METER” on “DATA MONITOR”, compare the value of DATA MONITOR with speedometer
pointer of combination meter. Speedometer and DATA MONITOR indications should be close.
Is the inspection result normal?
YES
>> Perform ABS actuator and electric unit (control unit) self-diagnosis. Refer to
(with ABS) or
BRC-105, "CONSULT-III Function (ABS)"
(with ESP/TCS/ABS).
NO
>> Replace combination meter. Refer to
MWI-94, "Removal and Installation"
DTC
CONSULT-III display
Detection condition
B2205
VEHICLE SPEED CIRC
[B2205]
Malfunction is detected when an erroneous speed signal is input for 2 seconds or more.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст