Nissan Sentra. Instruction — part 656
MWI-70
< SYMPTOM DIAGNOSIS >
THE OIL PRESSURE WARNING LAMP DOES NOT TURN ON
THE OIL PRESSURE WARNING LAMP DOES NOT TURN ON
Description
INFOID:0000000009758303
The oil pressure warning lamp stays off when the ignition switch is turned ON.
Diagnosis Procedure
INFOID:0000000009758304
1.
CHECK COMBINATION METER OIL PRESSURE WARNING LIGHT
1. Select METER/M&A on CONSULT.
2. Observe OIL W/L DATA MONITOR while operating the ignition switch.
Is the inspection result normal?
YES
>> Inspection End.
NO
>> Replace combination meter. Refer to
MWI-77, "Removal and Installation"
Component
Condition
CONSULT
Oil pressure warning light
Ignition ON
ON
Ignition OFF
OFF
MWI
THE OIL PRESSURE WARNING LAMP DOES NOT TURN OFF
MWI-71
< SYMPTOM DIAGNOSIS >
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
THE OIL PRESSURE WARNING LAMP DOES NOT TURN OFF
Description
INFOID:0000000009758305
The oil pressure warning lamp remains illuminated while the engine is running (normal oil pressure).
Diagnosis Procedure
INFOID:0000000009758306
1.
CHECK COMBINATION METER INPUT SIGNAL
1. Start the engine and select METER/M&A on CONSULT.
2. Observe OIL W/L DATA MONITOR and the operation of the oil pressure warning lamp on the combination
meter.
Is the inspection result normal?
YES
>> Perform ECM self-diagnosis. Refer to
.
NO
>> Replace combination meter. Refer to
MWI-77, "Removal and Installation"
Component
Condition
CONSULT
Oil pressure warning light
Engine running
OFF
MWI-72
< SYMPTOM DIAGNOSIS >
THE DOOR OPEN WARNING CONTINUES DISPLAYING, OR DOES NOT DIS-
PLAY
THE DOOR OPEN WARNING CONTINUES DISPLAYING, OR DOES NOT
DISPLAY
Description
INFOID:0000000009758307
• The door ajar warning is displayed even though all of the doors are closed.
• The door ajar warning is not displayed even though a door is ajar.
Diagnosis Procedure
INFOID:0000000009758308
1.
CHECK BCM INPUT SIGNAL
Check the BCM input signal. Refer to
DLK-102, "Component Function Check"
(with Intelligent Key) or
253, "Component Function Check"
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> GO TO 3.
2.
CHECK COMBINATION METER INPUT SIGNAL
Select the METER/M&A Data Monitor and check the DOOR W/L monitor value while opening and closing
doors.
Is the inspection result normal?
YES
>> Replace combination meter. Refer to
MWI-77, "Removal and Installation"
NO
>> Replace BCM. Refer to
BCS-73, "Removal and Installation"
(without Intelligent Key).
3.
CHECK DOOR SWITCH SIGNAL CIRCUIT
Check the door switch signal circuit. Refer to
DLK-102, "Diagnosis Procedure"
(with Intelligent Key) or
(without Intelligent Key).
Is the inspection result normal?
YES
>> GO TO 4.
NO
>> Repair or replace harness or connector.
4.
CHECK DOOR SWITCH
Perform a unit check for the door switch. Refer to
DLK-103, "Component Inspection"
(with Intelligent Key) or
DLK-255, "Component Inspection"
(without Intelligent Key).
Is the inspection result normal?
YES
>> Replace combination meter. Refer to
MWI-77, "Removal and Installation"
NO
>> Replace applicable door switch. Refer to
DLK-194, "Removal and Installation"
(with Intelligent
Key) or
DLK-341, "Removal and Installation"
Monitor item
Condition
Status
DOOR W/L
Door open
ON
Door closed
OFF
MWI
THE PARKING BRAKE RELEASE WARNING CONTINUES DISPLAYING, OR
DOES NOT DISPLAY
MWI-73
< SYMPTOM DIAGNOSIS >
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
THE PARKING BRAKE RELEASE WARNING CONTINUES DISPLAYING,
OR DOES NOT DISPLAY
Description
INFOID:0000000009758309
• The parking brake warning is displayed while driving the vehicle even though the parking brake is released.
• The parking brake warning is not displayed while driving the vehicle even though the parking brake is
applied.
Diagnosis Procedure
INFOID:0000000009758310
1.
CHECK PARKING BRAKE WARNING LAMP OPERATION
1. Start engine.
2. Check the operation of the brake warning lamp while operating the parking brake.
Is the inspection result normal?
YES
>> Replace combination meter. Refer to
MWI-77, "Removal and Installation"
NO
>> GO TO 2.
2.
CHECK PARKING BRAKE SWITCH
Check the parking brake switch. Refer to
MWI-61, "Component Inspection"
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> Replace parking brake switch.
3.
CHECK PARKING BRAKE SWITCH SIGNAL CIRCUIT
1. Turn ignition switch OFF.
2. Check the parking brake switch signal circuit. Refer to
.
Is the inspection result normal?
YES
>> Replace combination meter. Refer to
MWI-77, "Removal and Installation"
NO
>> Repair or replace harness or connector.
Condition
Warning lamp status
Parking brake applied
ON
Parking brake released
OFF
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст