Nissan Sentra. Instruction — part 619
IP-20
< REMOVAL AND INSTALLATION >
CLUSTER LID C
CLUSTER LID C
Removal and Installation - Cluster Lid C
INFOID:0000000009756858
REMOVAL
1. Remove cluster lid C lower. Refer to
IP-20, "Removal and Installation - Cluster Lid C Lower"
2. Remove the cluster lid C screws (A).
3. Disconnect the harness connector from cluster lid C.
4. Remove the center ventilator grilles assembly and hazard switch from the cluster lid C (if necessary).
Refer to
VTL-9, "CENTER VENTILATOR GRILLE : Removal and Installation"
(Center Ventilator Grilles)
and
EXL-129, "Removal and Installation"
(Hazard Switch).
INSTALLATION
Installation is in the reverse order of removal.
Removal and Installation - Cluster Lid C Lower
INFOID:0000000009756859
REMOVAL
1. Release cluster lid C lower clips and pawls using a suitable tool.
: Pawl
: Metal clip
2. Remove cluster lid C lower.
INSTALLATION
Installation is in the reverse order of removal.
ALJIA1046ZZ
ALJIA1047ZZ
INSTRUMENT LOWER PANEL LH
IP-21
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
K
L
M
A
B
IP
N
O
P
INSTRUMENT LOWER PANEL LH
Removal and Installation
INFOID:0000000009756860
REMOVAL
1. Remove the instrument side finisher LH (1) using a suitable tool.
2. Remove the hood and fuel filler handle assembly from the instrument lower panel LH. Refer to
"FUEL FILLER OPENER CABLE : Removal and Installation"
.
3. Release the instrument lower panel LH clips and pawls using a
suitable tool.
: Metal clip
: Pawl
4. Disconnect the harness connectors from the instrument lower panel LH and remove.
INSTALLATION
Installation is in the reverse order of removal.
ALJIA0018ZZ
ALJIA1048ZZ
IP-22
< REMOVAL AND INSTALLATION >
GLOVE BOX ASSEMBLY
GLOVE BOX ASSEMBLY
Removal and Installation
INFOID:0000000009756861
REMOVAL
1. Remove the instrument side finisher RH using a suitable tool.
2. Remove the glove box assembly upper screws (A).
3. Remove the glove box assembly lower screws (A).
4. Disconnect the harness connectors from the trunk switch and glove box lamp, then remove the glove box
assembly.
INSTALLATION
Installation is in the reverse order of removal.
ALJIA1049ZZ
ALJIA0021ZZ
CENTER CONSOLE ASSEMBLY
IP-23
< UNIT DISASSEMBLY AND ASSEMBLY >
C
D
E
F
G
H
I
K
L
M
A
B
IP
N
O
P
UNIT DISASSEMBLY AND ASSEMBLY
CENTER CONSOLE ASSEMBLY
Exploded View
INFOID:0000000009756862
Disassembly and Assembly
INFOID:0000000009756863
DISASSEMBLY
1. Remove the center console assembly. Refer to
IP-17, "Removal and Installation"
2. Remove the center console upper finisher.
1.
Center console upper finisher
2.
Center console side finisher (RH)
3.
Center console side finisher (LH)
4.
Center console side finisher screw cover
(LH/RH)
5.
Center console assembly
6.
Center console screw cover (LH/RH)
7.
Center console rear finisher
8.
Center console rear finisher cover
9.
Center console coin tray (if
equipped)
10. Heated seat switch finisher (if equipped) 11. Center console cup holder finisher
12. Shift selector finisher
13. Storage bin
ALJIA1036ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст