Nissan Sentra. Instruction — part 195
BRM-54
< SERVICE DATA AND SPECIFICATIONS (SDS)
HANDLING PRECAUTIONS FOR PLASTICS
Item
Component
Abbreviation
Material
1.
Door Mirror
Case
ASA
Acronitrile Styrene Acrylate
Skull cap
ABS
Acronitrile Butadiene Acrylate
2.
Outside door handle
Grip
PC
Polycarbonate
Escutcheon
PA
Polyamide (Nylon)
ALKIA2768ZZ
HANDLING PRECAUTIONS FOR PLASTICS
BRM-55
< SERVICE DATA AND SPECIFICATIONS (SDS)
C
D
E
F
G
H
I
J
L
M
A
B
BRM
N
O
P
3.
Front combination lamp
Lens
PC
Polycarbonate
Housing
PP
Polypropylene
4.
Front bumper fascia
PP + EPM
Polypropylene + Ethylene Propylene (Diene)
copolymer
5.
Rear combination lamp
Lens
PMMA
Poly Methyl Methacrylate
Housing
ABS
Acronitrile Butadiene Acrylate
6.
Rear bumper fascia
PP + EPM
Polypropylene + Ethylene Propylene (Diene)
copolymer
7.
Trunk lid finisher
ABS + PC
Acronitrile Butadiene Acrylate + Polycarbon-
ate
Item
Component
Abbreviation
Material
Item
Component
Abbreviation
Material
1.
Upper center pillar trim
PP
Polypropylene
2.
Rear finisher
PP
Polycarbonate
3.
Rear kicking plate
PP
Polypropylene
4.
Front kicking plate
PP
Polypropylene
5.
Instrument panel side finisher
PP
Polypropylene
6.
Front pillar finisher
PP
Polypropylene
7.
Steering column covers
PP
Polypropylene
ALKIA2770ZZ
CCS-1
CRUISE CONTROL & DRIVER ASSISTANCE
C
D
E
F
G
H
I
J
K
L
M
B
CCS
SECTION
CCS
N
P
A
CONTENTS
CRUISE CONTROL SYSTEM
ASCD
PRECAUTION . . . . . . . . . . . ...
PRECAUTIONS . . . . . . . . . . . . ...
SYSTEM DESCRIPTION . . . . . . . ..
AUTOMATIC SPEED CONTROL DEVICE
(ASCD) . . . . . . . . . . . . . . . ...
CCS-2
< PRECAUTION >
[ASCD]
PRECAUTIONS
PRECAUTION
PRECAUTIONS
Precaution for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT BELT
PRE-TENSIONER"
INFOID:0000000010287915
The Supplemental Restraint System such as “AIR BAG” and “SEAT BELT PRE-TENSIONER”, used along
with a front seat belt, helps to reduce the risk or severity of injury to the driver and front passenger for certain
types of collision. Information necessary to service the system safely is included in the SR and SB section of
this Instruction.
WARNING:
• To avoid rendering the SRS inoperative, which could increase the risk of personal injury or death in
the event of a collision which would result in air bag inflation, all maintenance must be performed by
an authorized NISSAN/INFINITI dealer.
• Improper maintenance, including incorrect removal and installation of the SRS, can lead to personal
injury caused by unintentional activation of the system. For removal of Spiral Cable and Air Bag
Module, see the SR section.
• Do not use electrical test equipment on any circuit related to the SRS unless instructed to in this
Service Instruction. SRS wiring harnesses can be identified by yellow and/or orange harnesses or har-
ness connectors.
PRECAUTIONS WHEN USING POWER TOOLS (AIR OR ELECTRIC) AND HAMMERS
WARNING:
• When working near the Airbag Diagnosis Sensor Unit or other Airbag System sensors with the Igni-
tion ON or engine running, DO NOT use air or electric power tools or strike near the sensor(s) with a
hammer. Heavy vibration could activate the sensor(s) and deploy the air bag(s), possibly causing
serious injury.
• When using air or electric power tools or hammers, always switch the Ignition OFF, disconnect the
battery and wait at least 3 minutes before performing any service.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст