Nissan Sentra. Instruction — part 68
AV-264
< DTC/CIRCUIT DIAGNOSIS >
[NAVIGATION WITHOUT BOSE]
U12AD AV CONTROL UNIT
U12AD AV CONTROL UNIT
DTC Logic
INFOID:0000000009758966
DTC DETECTION LOGIC
CONSULT Display
DTC Detection Condition
Possible Cause
ECU Temperature too High
[U12AD]
AV control unit temperature has exceeded maxi-
mum temperature.
Replace AV control unit if malfunction occurs
constantly.
Refer to
AV-298, "Removal and Installation"
.
AV
U12AE AV CONTROL UNIT
AV-265
< DTC/CIRCUIT DIAGNOSIS >
[NAVIGATION WITHOUT BOSE]
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
U12AE AV CONTROL UNIT
DTC Logic
INFOID:0000000009758967
DTC DETECTION LOGIC
CONSULT Display
DTC Detection Condition
Possible Cause
Internal Amplifier temperature
Warning
[U12AE]
Internal amplifier temperature has exceeded
maximum temperature.
Replace AV control unit if malfunction occurs
constantly.
Refer to
AV-266
< DTC/CIRCUIT DIAGNOSIS >
[NAVIGATION WITHOUT BOSE]
U12AF AV CONTROL UNIT
U12AF AV CONTROL UNIT
DTC Logic
INFOID:0000000009758968
DTC DETECTION LOGIC
CONSULT Display
DTC Detection Condition
Possible Cause
CD Mechanism Temperature
Warning
[U12AF]
CD drive temperature has exceeded maximum
temperature. CD drive is switched OFF to avoid
irreversible damage.
Replace AV control unit if malfunction occurs
constantly.
Refer to
AV-298, "Removal and Installation"
.
AV
U12B0 POWER SUPPLY VOLTAGE
AV-267
< DTC/CIRCUIT DIAGNOSIS >
[NAVIGATION WITHOUT BOSE]
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
U12B0 POWER SUPPLY VOLTAGE
DTC Logic
INFOID:0000000009758969
DTC DETECTION LOGIC
Diagnosis Procedure
INFOID:0000000009758970
1.
CHECK CHARGING SYSTEM
Check the vehicle charging system. Refer to
STR-20, "Work Flow (With GR8-1200 NI)"
or
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Repair or replace the malfunctioning components.
2.
CHECK AV CONTROL UNIT POWER SUPPLY AND GROUND CIRCUITS
Perform the AV control unit power supply and ground circuit diagnosis procedure. Refer to
TROL UNIT : Diagnosis Procedure"
.
Is the inspection result normal?
YES
>> Replace the AV control unit. Refer to
AV-298, "Removal and Installation"
.
NO
>> Repair or replace harness or connectors.
CONSULT Display
DTC Detection Condition
Possible Cause
Supply Voltage Goes below 9V
> 20s
[U12B0]
AV control unit supply voltage exceeds lower lim-
its.
• Charging system malfunction.
• AV control unit power supply or ground circuits.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст