Nissan Sentra. Instruction — part 191
BRM-38
< REMOVAL AND INSTALLATION >
REPLACEMENT OPERATIONS
1. Check the dimensions and fit.
2. Use clamping pliers to retain the roof panel to the front and rear window flanges.
3. Plug weld as necessary.
4. Dress welds as necessary to allow proper glass fit.
5. Refer to NISSAN approved panel refinishing.
6. Install the headlining. Refer to
INT-40, "Removal and Installation"
7. Install rear window glass. Refer to
GW-26, "Removal and Installation"
8. Install windshield glass. Refer to
GW-12, "Removal and Installation"
.
9. Install roof side moldings (RH/LH). Refer to
EXT-32, "Removal and Installation"
.
1.
Body side upper spot welds
2.
Plug welds
A. Clamping pliers
Front
ALKIA2826ZZ
REPLACEMENT OPERATIONS
BRM-39
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
J
L
M
A
B
BRM
N
O
P
Outer Sill
INFOID:0000000009758082
Work after the front pillar reinforcement, center pillar reinforcement, and rear fender have been removed.
Change parts
z
Outer sill reinforcement
Front
ALKIA2795ZZ
BRM-40
< REMOVAL AND INSTALLATION >
REPLACEMENT OPERATIONS
Rear Fender
INFOID:0000000009758083
ALKIA2778ZZ
Change parts
A.
Recommended cut zone
B. Bonded hem flange
Front
REPLACEMENT OPERATIONS
BRM-41
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
J
L
M
A
B
BRM
N
O
P
Rear Panel
INFOID:0000000009758084
Rear Floor Rear
INFOID:0000000009758085
• Work after rear panel assembly has been removed.
Change parts
z
Rear panel assembly
ALKIA2775ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст