Nissan Quest E52. Instruction — part 1268
PREPARATION
WW-5
< PREPARATION >
C
D
E
F
G
H
I
J
K
M
A
B
WW
N
O
P
PREPARATION
PREPARATION
Commercial Service Tool
INFOID:0000000009649538
Tool name
Description
Washer nozzle adjuster
Adjusting washer nozzle.
(Available in SEC. 289 of PARTS CATALOG: Part
No. 28949 1EA0A)
NOTE:
Washer nozzle adjuster is included with shipment
of nozzle.
JSLIA0149ZZ
WW-6
< SYSTEM DESCRIPTION >
COMPONENT PARTS
SYSTEM DESCRIPTION
COMPONENT PARTS
Component Parts Location
INFOID:0000000009649539
A.
Cowl top, left side of engine room
B.
Behind front bumper (RH)
C.
Back door finisher inside
JMLIA2162ZZ
COMPONENT PARTS
WW-7
< SYSTEM DESCRIPTION >
C
D
E
F
G
H
I
J
K
M
A
B
WW
N
O
P
No.
Part
Function
1.
Combination meter
Transmits the vehicle speed signal to BCM via CAN communication.
2.
Combination switch
(Wiper & washer switch)
Refer to
BCS-8, "COMBINATION SWITCH READING SYSTEM : System Description"
for de-
tailed installation location.
3.
Front wiper motor
• IPDM E/R controls front wiper operation.
• Front wiper stop position signal is transmitted to IPDM E/R.
4.
IPDM E/R
• Controls the integrated relay according to the request (via CAN communication) from BCM.
• Performs the auto stop control of the front wiper.
• Refer to
PCS-4, "IPDM E/R : Component Parts Location"
for detailed installation location.
5.
Washer level switch
• Combination meter indicates low washer fluid warning judged by the signal from the washer
level switch.
• Refer to
MWI-17, "MASTER WARNING LAMP : System Description"
6.
Washer pump
• Washer fluid is sprayed according to washer switch states.
• Switching between front washer and rear washer is performed according to the voltage po-
larity change to washer pump.
7.
BCM
• Judges the each switch status by the combination switch reading function.
• Requests (via CAN communication) the front wiper relay and the front wiper high relay ON to
IPDM E/R.
• Supplies power to the rear wiper motor.
• Performs the auto stop control of the rear wiper.
• Refer to
BCS-4, "BODY CONTROL SYSTEM : Component Parts Location"
for detailed in-
stallation location.
8.
Rear wiper motor
• BCM controls rear wiper operation.
• Rear wiper stop position signal is transmitted to BCM.
WW-8
< SYSTEM DESCRIPTION >
SYSTEM
SYSTEM
FRONT WIPER AND WASHER SYSTEM
FRONT WIPER AND WASHER SYSTEM : System Description
INFOID:0000000009649540
SYSTEM DIAGRAM
OUTLINE
The front wiper is controlled by each function of BCM and IPDM E/R.
Control by BCM
• Combination switch reading function
• Front wiper control function
Control by IPDM E/R
• Front wiper control function
• Relay control function
Combination meter indicates low washer fluid level warning judged by the signal from the washer level switch.
For detailes of low washer fluid level warning, refer to
MWI-17, "MASTER WARNING LAMP : System Descrip-
.
FRONT WIPER BASIC OPERATION
• BCM detects the combination switch condition by the combination switch reading function.
• BCM transmits the front wiper request signal to IPDM E/R via CAN communication depending on each oper-
ating condition of the front wiper.
• IPDM E/R turns ON/OFF the integrated front wiper relay and the front wiper high relay according to the front
wiper request signal. IPDM E/R provides the power supply to operate the front wiper HI/LO operation.
FRONT WIPER LO OPERATION
• BCM transmits the front wiper request signal (LO) to IPDM E/R via CAN communication according to the
front wiper LO operating condition.
Front wiper LO operating condition
- Ignition switch ON
- Front wiper switch LO or front wiper switch MIST (while pressing)
• IPDM E/R turns ON the integrated front wiper relay according to the front wiper request signal (LO).
FRONT WIPER HI OPERATION
• BCM transmits the front wiper request signal (HI) to IPDM E/R via CAN communication according to the
front wiper HI operating condition.
Front wiper HI operating condition
- Ignition switch ON
- Front wiper switch HI
• IPDM E/R turns ON the integrated front wiper relay and the front wiper high relay according to the front wiper
request signal (HI).
JMLIA2011GB
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст