Nissan Quest E52. Instruction — part 1044
PRECAUTIONS
SE-5
< PRECAUTION >
C
D
E
F
G
H
I
K
L
M
A
B
SE
N
O
P
• Apply sealing compound where necessary when installing parts.
• When applying sealing compound, be careful that the sealing compound never protrudes from parts.
• When replacing any metal parts (for example body outer panel, members, etc.), always take rust prevention
measures.
Precaution for Work
INFOID:0000000009652910
• When removing or disassembling each component, be careful not to damage or deform it. If a component
may be subject to interference, always protect it with a shop cloth.
• When removing (disengaging) components with a screwdriver or similar tool, always wrap the component
with a shop cloth or vinyl tape to protect it.
• Protect the removed parts with a shop cloth and keep them.
• Replace a deformed or damaged clip.
• If a part is specified as a non-reusable part, always replace it with new one.
• Always tighten bolts and nuts securely to the specified torque.
• After reinstallation is complete, always check that each part works normally.
• Follow the steps below to clean components.
- Water soluble foul: Dip a soft cloth into lukewarm water, and wring the water out of the cloth to wipe the
fouled area.
Then rub with a soft and dry cloth.
- Oily foul: Dip a soft cloth into lukewarm water with mild detergent (concentration: within 2 to 3%), and wipe
the fouled area.
Then dip a cloth into fresh water, and wring the water out of the cloth to wipe the detergent off. Then rub with
a soft and dry cloth.
• Never use organic solvent such as thinner, benzene, alcohol, and gasoline.
• For genuine leather seats, and use a genuine leather seat cleaner.
SE-6
< PREPARATION >
PREPARATION
PREPARATION
PREPARATION
Special Service Tool
INFOID:0000000009652911
The actual shapes of Kent-Moore tools may differ from those of special service tools illustrated here.
Commercial Service Tool
INFOID:0000000009652912
Tool number
(Kent-Moore No.)
Tool name
Description
(J39570)
Chassis ear
Locates the noise
(J50397)
NISSAN Squeak and Rattle
Kit
Repairs the cause of noise
SIIA0993E
SIIA0994E
Tool name
Description
Engine ear
Locates the noise
SIIA0995E
CLIP LIST
SE-7
< PREPARATION >
C
D
E
F
G
H
I
K
L
M
A
B
SE
N
O
P
CLIP LIST
Clip List
INFOID:0000000009652913
JMJIA3734GB
SE-8
< SYSTEM DESCRIPTION >
COMPONENT PARTS
SYSTEM DESCRIPTION
COMPONENT PARTS
POWER SEAT SYSTEM
POWER SEAT SYSTEM : Component Parts Location
INFOID:0000000009652914
HEATED SEAT SYSTEM
A.
View with seatback pad removed
(passenger side).
B.
Back side of seat cushion.
C.
View with seatback pad removed
(driver side).
No.
Item
Function
1.
Reclining motor (passenger side)
Refer to
2.
Sliding motor (passenger side)
Refer to
3.
Power seat switch (passenger side)
Refer to
4.
Lumbar support switch
Refer to
SE-11, "Lumbar Support Switch"
.
5.
BCM
Supplies at all times the power received from battery to power seat switch.
Refer to
BCS-4, "BODY CONTROL SYSTEM : Component Parts Location"
6.
Power seat switch (driver side)
Refer to
7.
Sliding motor (driver side)
Refer to
8.
Lifting motor (front)
Refer to
.
9.
Lumbar support motor
Refer to
.
10.
Reclining motor
Refer to
11.
Lifting motor (front)
Refer to
.
JMJIA6181ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст