Nissan Quest E52. Instruction — part 63
AV
COMPONENT PARTS
AV-131
< SYSTEM DESCRIPTION >
[BASE AUDIO WITH SEPARATE DISPLAY]
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
FRONT SQUAWKER
•
φ
6.5 cm (2 in) squawker is installed to the side of instrument
panel.
• Sound signal is input from the AV control unit to output high and
mid range sounds.
SLIDE DOOR SPEAKER
•
φ
16cm (6.5 in) speaker is located at the lower part of the back of
the slide door.
• Sound signal is input from the AV control unit to output high, mid,
and low range sounds.
Multifunction Switch
INFOID:0000000009651992
• The multifunction switch is an integrated switch that combines the
audio operation and other operations switches. This integrated
switch is located in the lower part of the front display unit.
• Connected with preset switch via hardwire and operation signal is
transmitted to AV control unit via AV communication.
PRESET SWITCH
• The preset switch is separated from the multifunction switch and
capable of audio operation.
• Operation signals of the multifunction switch and the preset switch
are transmitted to the AV control unit via AV communication.
Rated input
: 7 W
Maximum
input
: 40 W
Impedance
: 4
Ω
JSNIA3402ZZ
Rated input
: 20 W
Maximum
input
: 40 W
Impedance
: 2
Ω
JSNIA3405ZZ
JSNIA4202ZZ
JSNIA4203ZZ
AV-132
< SYSTEM DESCRIPTION >
[BASE AUDIO WITH SEPARATE DISPLAY]
COMPONENT PARTS
Disk Eject Switch
INFOID:0000000009651993
• The disk eject switch is used for removing CD/DVD from the AV
control unit.
• When the disk eject switch is pressed, a disk eject signal is trans-
mitted to the AV control unit, and the AV control unit ejects CD/
DVD.
Steering Switch
INFOID:0000000009651994
• Operations for audio and hands-free phone, etc. are possible.
• This switch is connected to the AV control unit, and the switch
operation signal is transmitted to the AV control unit via voltage
multiplex communication.
TEL Adapter Unit
INFOID:0000000009651995
• Inputs the TEL voice signal from TEL antenna and outputs it to the
AV control unit.
• It is connected with the AV control unit via AV communication and
controlled with the AV control unit.
TEL Antenna
INFOID:0000000009651996
Receives the TEL voice signal from cellular phone and outputs it to
the TEL adapter unit.
JSNIA3454ZZ
JSNIA4329ZZ
JSNIA4236ZZ
JSNIA4237ZZ
AV
COMPONENT PARTS
AV-133
< SYSTEM DESCRIPTION >
[BASE AUDIO WITH SEPARATE DISPLAY]
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
Microphone
INFOID:0000000009651997
• The voice control/TEL microphone is installed on the left side of
the map lamp assembly.
• The power is supplied from the TEL adapter unit to the micro-
phone, transmitting sound signals to the TEL adapter unit at the
voice control or during hands-free phone communication.
USB Connector
INFOID:0000000009651998
• USB connector is installed to the console box.
• iPod
®
and USB memory can be connected to the AV control unit.
Auxiliary Input Jacks
INFOID:0000000009651999
• Installed to the rear of center console.
• Sound signals and image signals from the external equipment are
transmitted to the AV control unit.
Rear View Camera
INFOID:0000000009652000
• The rear view camera is installed to the back door finisher.
• Super-small CCD camera (color) using CCD
*
for the image pickup
element is adopted.
• With the mirror processing function, a mirror image is sent as if it is
viewed by a rear view mirror.
• Power for the camera is supplied from the AV control unit, and the
image at the rear of the vehicle is sent to the AV control unit.
NOTE:
*: Abbreviation of Charge Coupled Device. CCD can turn incident
light from the lens into electrons and memorize the image like a
photo.
Specification
JPNIA1448ZZ
JPNIA1447ZZ
JSNIA3417ZZ
JSNIA6373ZZ
Manufacturer name
Panasonic corporation
Image pickup element
1/4-inch interline CCD color
AV-134
< SYSTEM DESCRIPTION >
[BASE AUDIO WITH SEPARATE DISPLAY]
COMPONENT PARTS
Steering Angle Sensor
INFOID:0000000009652001
• Steering sensor is installed to the spiral cable.
• Steering angle sends the steering signal necessary for predictive
course line of the rear view monitor function to the AV control unit
via CAN communication.
Antenna amp., Radio Antenna, and Antenna Feeder
INFOID:0000000009652002
RADIO ANTENNA
• AM/FM radio main antenna is located on the right rear side window glass and FM radio sub antenna on the
left rear side window glass.
• The AM/FM radio main antenna path has an antenna amp. to obtain sufficient reception power.
CAUTION:
Affixing any mirror-type window films or metallic items (e.g. commercial antenna) on the rear side win-
dow glass causes a reduction in the radio receiver sensitivity.
Effective number of pixels
Approx. 250,000 pixels (510
×
492)
Minimum brightness
2 lx
Angle of view
H: 137
°
V: 92
°
Image
With mirror processing function
JSNIA1571ZZ
JSNIA4204GB
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст