Nissan Quest E52. Instruction — part 135
AV
USB CONNECTOR
AV-419
< REMOVAL AND INSTALLATION >
[BOSE AUDIO WITHOUT NAVIGATION]
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
USB CONNECTOR
Removal and Installation
INFOID:0000000009652230
REMOVAL
1.
Remove center console upper finisher. Refer to
IP-29, "Disassembly and Assembly"
2.
Unhook pawl to remove USB connector from center console upper finisher.
INSTALLATION
Install in the reverse order of removal.
AV-420
< REMOVAL AND INSTALLATION >
[BOSE AUDIO WITHOUT NAVIGATION]
TEL ADAPTER UNIT
TEL ADAPTER UNIT
Removal and Installation
INFOID:0000000009652231
REMOVAL
1.
Remove cluster lid C. Refer to
IP-14, "Removal and Installation"
2.
Remove TEL adapter unit mounting bracket screws.
3.
Disconnect connector to remove TEL adapter unit, TEL antenna, and bracket as a single unit.
4.
Remove bracket screws to remove TEL adapter unit from bracket.
INSTALLATION
Install in the reverse order of removal.
AV
TEL ANTENNA
AV-421
< REMOVAL AND INSTALLATION >
[BOSE AUDIO WITHOUT NAVIGATION]
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
TEL ANTENNA
Removal and Installation
INFOID:0000000009652232
REMOVAL
1.
Remove cluster lid C. Refer to
IP-14, "Removal and Installation"
2.
Remove TEL adapter unit mounting bracket screws.
3.
Disconnect connector to remove TEL adapter unit, TEL antenna, and bracket as a single unit.
4.
Disconnect connector and remove screws to TEL antenna.
INSTALLATION
Install in the reverse order of removal.
AV-422
< REMOVAL AND INSTALLATION >
[BOSE AUDIO WITHOUT NAVIGATION]
MICROPHONE
MICROPHONE
Removal and Installation
INFOID:0000000009652233
REMOVAL
1.
Remove map lamp assembly. Refer to
INL-67, "Removal and Installation"
2.
Unhook pawls to remove microphone from map lamp assembly.
CAUTION:
Carefully handle the pawl fixing the microphone to prevent damage to the pawl.
INSTALLATION
Install in the reverse order of removal.
NOTE:
After installing microphone, check that it is securely installed with no backlash.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст