Nissan Quest E52. Instruction — part 1071
SECOND SEAT
SE-113
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
K
L
M
A
B
SE
N
O
P
SECOND SEAT
Exploded View
INFOID:0000000009652991
1.
Headrest
2.
Headrest holder (locked)
3.
Headrest holder (free)
4.
Seatback trim
5.
Seatback pad
6.
Seatback silencer
7.
Reclining device inner cover
8.
Armrest cap
9.
Inner armrest assembly
JMJIA6214GB
SE-114
< REMOVAL AND INSTALLATION >
SECOND SEAT
Removal and Installation
INFOID:0000000009652992
REMOVAL
1.
Remove headrest.
2.
Remove rear kicking plate. Refer to
INT-22, "KICKING PLATE : Removal and Installation"
3.
Slide seat to the frontmost position.
4.
Remove seat rear outer leg cover.
a.
Pull up the rear edge of the seat rear outer leg cover to release
the pawls.
b.
Pull seat rear outer leg cover in direction indicated by the arrow
as shown in the figure. Disengage pawls on the rear side.
5.
Remove seat rear inner leg cover.
a.
Pull up the rear edge of the seat rear inner leg cover to release
the pawls.
b.
Pull seat rear inner leg cover in direction indicated by the arrow
as shown in the figure. Disengage pawls on the rear side.
6.
Remove rear outer mounting bolt.
7.
Remove rear inner mounting bolt and seat slide bracket.
8.
Slide seat to the rearmost position.
9.
Remove seat front outer leg cover (front).
10. Seat slide bracket
11.
Seat cushion inner finisher
12. Seat belt buckle
13. Anchor bolt
14. Anchor bolt cap
15. Seat front inner leg cover (rear)
16. Seat front inner leg cover (front)
17. Seat hinge finisher cap
18. Seat hinge outer finisher RH
19. Bush
20. Seat cushion trim
21. Seat cushion pad
22. Seat front outer leg cover (front)
23. Seat front outer leg cover (rear)
24. Snap ring
25. Seat reclining lever knob
26. Seat cushion silencer
27. Seat hinge finisher patch
28. Seat hinge outer finisher LH
29. Seat cushion outer finisher
30. Seat hinge inner finisher LH
31. Seat hinge inner finisher RH
32. Seat folding lever assembly
33. Outer armrest assembly
34. Reclining device outer cover
35. Seat rear outer leg cover
36. Seat rear inner leg cover
37. Seat cushion rear center finisher
38. Walk-in lever escutcheon
39. Walk-in lever knob
40. Seatback board
41. Seat frame & adjuster assembly
42. Seat frame assembly
43. Seat link assembly
44. Seat cushion frame
: Pawl
: Metal clip
: N·m (kg-m, ft-lb)
: Pawl
JMJIA6225ZZ
: Pawl
JMJIA6226ZZ
SECOND SEAT
SE-115
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
K
L
M
A
B
SE
N
O
P
a.
Pull up the front edge of the seat front outer leg (front) cover to
release the pawls.
b.
Pull seat front outer leg cover (front) upwards. Disengage pawls
on the rear side.
10. Remove seat front inner leg cover (front).
a.
Pull up the front edge of the seat front inner leg (front) cover to
release the pawls.
b.
Pull seat front inner leg cover (front) upwards. Disengage pawls
on the rear side.
11. Remove front outer mounting bolt.
12. Remove front inner mounting bolt.
13. Remove seat from the vehicle.
CAUTION:
When removing and installing, use shop cloths to protect parts from damage.
INSTALLATION
Note the following items, and install in the reverse order of removal.
CAUTION:
• When removing and installing, use shop cloths to protect parts from damage.
• When installing, tighten mounting bolts according to the
numerical order as shown in the figure, starting from front
inner mounting bolt.
For the specified torque, refer to
SEATBACK
SEATBACK : Disassembly and Assembly
INFOID:0000000009652993
DISASSEMBLY
1.
Remove walk-in lever escutcheon.
: Pawl
JMJIA6227ZZ
: Pawl
JMJIA6228ZZ
JMJIA6229ZZ
SE-116
< REMOVAL AND INSTALLATION >
SECOND SEAT
a.
Pull down walk-in lever knob, disengage pawl using a screw-
driver, and then slide walk-in lever knob to remove.
b.
Pull walk-in lever escutcheon forward, disengage pawls, and
then remove walk-in lever escutcheon.
2.
Remove inner armrest assembly and outer armrest.
a.
Disengage pawls and remove armrest cap.
b.
Remove mounting bolt, and then remove inner armrest assembly and outer armrest assembly.
3.
Remove seatback board from the seat frame & adjuster assembly.
a.
Operate seat reclining lever and fold seatback forward.
b.
Remove seatback trim hook and loop fastener (A).
c.
Remove seatback retainer (B), and then open seatback fastener
(C).
d.
Remove rubber band installed on seatback board.
: Pawl
JMJIA6230ZZ
: Pawl
JMJIA6250ZZ
: Pawl
JMJIA4680ZZ
JMJIA6251ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст