Nissan Quest E52. Instruction — part 1074
THIRD SEAT
SE-125
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
K
L
M
A
B
SE
N
O
P
Removal and Installation
INFOID:0000000009652996
REMOVAL
RH side seat
1.
Remove headrest.
2.
Remove hook and loop fastener (A) on seat cushion carpet and
disengage clips.
3.
Remove hook and loop fastener (B) on seat cushion carpet and
remove seat cushion carpet.
4.
Remove front outer mounting bolt.
5.
Remove front inner mounting bolt.
6.
Operate seatback strap and fold seatback toward vehicle front.
7.
Remove luggage floor rear board. Refer to
INT-40, "LUGGAGE FLOOR REAR BOARD : Removal and
.
8.
Remove cable cover. Refer to
INT-41, "CABLE COVER : Removal and Installation"
9.
Remove rear outer mounting bolt.
10. Remove rear inner mounting bolt.
11. Disconnect harness connector (A). (only for seat with seatback
power return system or seatback power folding system)
12. Remove seat from the vehicle.
CAUTION:
When removing and installing, use shop cloths to protect parts from damage.
LH side seat
1.
Remove headrest.
19. Seat torsion bar
20. Seat torsion bar outer bracket
21. Torsion bar silencer
22. Bush A
23. Washer
24. Seat adjuster assembly
25. Seat cushion carpet
26. Seatback lock relay
27. Seatback lock actuator
28. Seat harness assembly
29. Seat hinge arm cover
30. Seat hinge assembly
31. Seat cushion outer hinge cover
32. Reclining cable
33. Seatback board
34. Seatback hook assembly
35. Seatback frame
36. Reclining device assembly
37. Bush B
38. Reclining arm cover
39. Seat cushion frame assembly
40. Seat hinge cover
41. Seat link assembly
: Pawl
: N·m (kg-m, ft-lb)
: Clip
JMJIA4922ZZ
JMJIA6104ZZ
SE-126
< REMOVAL AND INSTALLATION >
THIRD SEAT
2.
Remove hook and loop fastener (A) on seat cushion carpet and
disengage clips.
3.
Remove hook and loop fastener (B) on seat cushion carpet and
remove seat cushion carpet.
4.
Remove front outer mounting bolt.
5.
Remove front inner mounting bolt.
6.
Operate seatback strap and fold seatback toward vehicle front.
7.
Remove luggage floor rear board. Refer to
INT-40, "LUGGAGE FLOOR REAR BOARD : Removal and
.
8.
Remove cable cover. Refer to
INT-41, "CABLE COVER : Removal and Installation"
9.
Remove rear outer mounting bolt.
10. Remove rear inner mounting bolt.
11. Disconnect harness connector (A) and (B). (only for seat with
seatback power return system or seatback power folding sys-
tem)
12. Remove seat from the vehicle.
CAUTION:
When removing and installing, use shop cloths to protect parts from damage.
INSTALLATION
RH side seat
Note the following items, and install in the reverse order of removal.
CAUTION:
• When removing and installing, use shop cloths to protect parts from damage.
• Before tightening bolts, check that the carpet is not caught in bolt holes on mounting portion.
• When installing seat to the vehicle, fold seatback toward vehicle front, and then mount the seat to
the vehicle.
• When installing, tighten mounting bolts according to the
numerical order as shown in the figure, starting from rear
inner mounting bolt.
For the specified torque, refer to
LH side seat
Note the following items, and install in the reverse order of removal.
: Clip
JMJIA4923ZZ
JMJIA6105ZZ
JMJIA6106ZZ
THIRD SEAT
SE-127
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
K
L
M
A
B
SE
N
O
P
CAUTION:
• When removing and installing, use shop cloths to protect parts from damage.
• Before tightening bolts, check that the carpet is not caught in bolt holes on mounting portion.
• When installing seat to the vehicle, fold seatback toward vehicle front, and then mount the seat to
the vehicle.
• When installing, tighten mounting bolts according to the
numerical order as shown in the figure, starting from rear
inner mounting bolt.
For the specified torque, refer to
SEATBACK
SEATBACK : Disassembly and Assembly
INFOID:0000000009652997
DISASSEMBLY
RH side seat
1.
Remove RH seat belt buckle and center seat belt buckle. Refer to
.
2.
Remove seat cushion frame assembly from seatback. Refer to
SE-132, "SEAT CUSHION : Disassembly
.
3.
Remove seatback hook and loop fastener (A).
4.
Roll up seatback trim, and then remove seatback trim fixing clips
(B).
5.
Remove seatback hook assembly.
a.
Rotate seatback hook to the position where mounting screw (A)
can be removed, and then remove screw.
b.
Pull seatback hook assembly forward, disengage pawl, and then
remove seatback hook assembly from the seatback.
JMJIA6107ZZ
JMJIA6109ZZ
: Pawl
JMJIA4730ZZ
SE-128
< REMOVAL AND INSTALLATION >
THIRD SEAT
6.
Pull up seatback trim (1) to the position where seatback trim
mounting clips (A) can be removed.
CAUTION:
Be careful not to damage seatback trim when pulling up
seatback trim.
7.
Remove seatback trim fixing clips.
8.
Remove seatback board and seatback board fixing clips from seatback frame.
a.
Slide and align the clips (B) to the holes on the seatback as
shown in the figure, and then remove the seatback board (A).
CAUTION:
Always slide clips before removing seatback board. Clips
may be damaged if seatback board is removed without slid-
ing the clips.
b.
Remove seatback board fixing clips from seatback frame.
9.
Use pincers, etc., to press up pawls as shown by the arrows in
the figure, and remove headrest holder from seatback.
CAUTION:
Before installing headrest holder check its orientation.
(front/rear and right/left)
10. Pull out seatback strap from seatback pad.
11. Remove seatback trim and seatback pad from seatback frame.
12. Remove hog rings, and separate the seatback trim and seatback pad.
CAUTION:
Before performing separating operation, check the installation position of hog rings.
13. Remove seatback silencer from seatback frame.
14. Remove seat hinge assembly and reclining device assembly from seat adjuster assembly.
a.
Remove seat adjuster lower carpet retainer, and then remove seat adjuster lower carpet from seat
adjuster assembly.
b.
Remove fixing screws, and then remove seat hinge arm cover and seat hinge cover from seat hinge
assembly.
c.
Remove fixing screws and clip, and then remove reclining arm cover and reclining device cover from
reclining device assembly.
d.
Remove following parts from reclining device assembly.
JMJIA6108ZZ
JMJIA4076ZZ
PIIB4084J
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст