Nissan Quest E52. Instruction — part 318
DEF-26
< DTC/CIRCUIT DIAGNOSIS >
REAR WINDOW DEFOGGER
Is the inspection result normal?
YES
>> GO TO 5.
NO
>> Repair or replace harness or connector between fuse block (J/B) and rear window defogger.
5.
CHECK FUSE BLOCK (J/B)
1.
Turn ignition switch ON.
2.
Check voltage between fuse block (J/B) connector (fuse block side) and ground.
Is the inspection result normal?
YES
>> GO TO 7.
NO
>> Replace fuse block (J/B).
6.
CHECK FILAMENT
Check the filament for damage or blown.
Refer to
DEF-39, "Inspection and Repair"
Is the inspection result normal?
YES
>> GO TO 7.
NO
>> Repair filament.
7.
CHECK INTERMITTENT INCIDENT
Check intermittent incident.
Refer to
GI-42, "Intermittent Incident"
>> INSPECTION END
Fuse block (J/B)
Rear window defogger
Continuity
Connector
Terminal
Connector
Terminal
B6
10G
D184
1
Existed
(+)
(-)
Condition
Voltage (V)
(Approx.)
Fuse block (J/B)
Connector
Terminal
B6
10G
Ground
Rear window defogger
switch
ON
Battery voltage
OFF
0
DOOR MIRROR DEFOGGER
DEF-27
< DTC/CIRCUIT DIAGNOSIS >
C
D
E
F
G
H
I
J
K
M
A
B
DEF
N
O
P
DOOR MIRROR DEFOGGER
Component Function Check
INFOID:0000000009650829
1.
CHECK DOOR MIRROR DEFOGGER
1.
Perform Active Test (“REAR DEFOGGER”) with CONSULT.
2.
Touch “ON”.
3.
Check that both side door mirror glasses are getting warmer.
Is the inspection result normal?
YES
>> Door mirror defoggers are OK.
NO
>> Refer to
.
Diagnosis Procedure
INFOID:0000000009650830
1.
CHECK DOOR MIRROR DEFOGGER CIRCUIT
1.
Turn ignition switch OFF.
2.
Disconnect door mirror (both sides) connectors.
3.
Turn ignition switch ON.
4.
Check voltage between door mirror (driver side) connector and ground.
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> GO TO 2.
2.
CHECK FUSE BLOCK (J/B)
1.
Turn ignition switch OFF.
2.
Disconnect fuse block (J/B) harness connector.
3.
Turn ignition switch ON.
4.
Check voltage between fuse block (J/B) connector (fuse block side) and ground.
Is the inspection result normal?
YES
>> Repair or replace harness or connector between fuse block (J/B) and door mirror (driver side).
NO
>> Replace fuse block (J/B).
3.
CHECK INTERMITTENT INCIDENT
Check intermittent incident.
Refer to
GI-42, "Intermittent Incident"
.
Is the inspection result normal?
>> INSPECTION END
(+)
(-)
Condition
Voltage (V)
(Approx.)
Door mirror (driver side)
Connector
Terminal
D43
7
Ground
Rear window defogger
switch
ON
Battery voltage
OFF
0
(+)
(-)
Condition
Voltage (V)
(Approx.)
Fuse block (J/B)
Connector
Terminal
M3
10C
Ground
Rear window defogger
switch
ON
Battery voltage
OFF
0
DEF-28
< DTC/CIRCUIT DIAGNOSIS >
DRIVER SIDE DOOR MIRROR DEFOGGER
DRIVER SIDE DOOR MIRROR DEFOGGER
Component Function Check
INFOID:0000000009650831
1.
CHECK DRIVER SIDE DOOR MIRROR DEFOGGER
1.
Perform Active Test (“REAR DEFOGGER”) with CONSULT.
2.
Touch “ON”.
3.
Check that the driver side door mirror glass is getting warmer.
Is the inspection result normal?
YES
>> Driver side door mirror defogger is OK.
NO
>> Refer to
.
Diagnosis Procedure
INFOID:0000000009650832
1.
CHECK POWER SUPPLY CIRCUIT
1.
Turn ignition switch OFF.
2.
Disconnect door mirror (driver side) connector.
3.
Turn ignition switch ON.
4.
Check voltage between door mirror (driver side) harness connector and ground.
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Repair or replace harness or connector between fuse block (J/B) and door mirror (driver side).
2.
CHECK GROUND CIRCUIT
1.
Turn ignition switch OFF.
2.
Check continuity between door mirror (driver side) harness connector and ground.
Is the inspection result normal?
YES
>> Replace glass mirror (driver side).
NO
>> Repair or replace harness or connector between door mirror (driver side) and ground.
(+)
(-)
Condition
Voltage (V)
(Approx.)
Door mirror (driver side)
Connector
Terminal
D43
7
Ground
Rear window defogger
switch
ON
Battery voltage
OFF
0
Door mirror (driver side)
Ground
Continuity
Connector
Terminal
D43
19
Existed
PASSENGER SIDE DOOR MIRROR DEFOGGER
DEF-29
< DTC/CIRCUIT DIAGNOSIS >
C
D
E
F
G
H
I
J
K
M
A
B
DEF
N
O
P
PASSENGER SIDE DOOR MIRROR DEFOGGER
Component Function Check
INFOID:0000000009650833
1.
CHECK PASSENGER SIDE DOOR MIRROR DEFOGGER
1.
Perform Active Test (“REAR DEFOGGER”) with CONSULT.
2.
Touch “ON”.
3.
Check that the passenger side door mirror glass is getting warmer.
Is the inspection result normal?
YES
>> Passenger side door mirror defogger is OK.
NO
>> Refer to
.
Diagnosis Procedure
INFOID:0000000009650834
1.
CHECK POWER SUPPLY CIRCUIT
1.
Turn ignition switch OFF.
2.
Disconnect door mirror (passenger side) connector.
3.
Turn ignition switch ON.
4.
Check voltage between door mirror (passenger side) harness connector and ground.
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Repair or replace harness or connector between fuse block (J/B) and door mirror (passenger
side).
2.
CHECK GROUND CIRCUIT
1.
Turn ignition switch OFF.
2.
Check continuity between door mirror (passenger side) harness connector and ground.
Is the inspection result normal?
YES
>> Replace glass mirror (passenger side).
NO
>> Repair or replace harness or connector between door mirror (passenger side) and ground.
(+)
(-)
Condition
Voltage (V)
(Approx.)
Door mirror (Passenger side)
Connector
Terminal
D3
7
Ground
Rear window defogger
switch
ON
Battery voltage
OFF
0
Door mirror (passenger side)
Ground
Continuity
Connector
Terminal
D3
19
Existed
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст