Nissan Quest E52. Instruction — part 1008
PWO-20
< WIRING DIAGRAM >
[AC 120 V OUTLET]
AC 120 V POWER OUTLET
JRMWE3312GB
PWO
DIAGNOSIS AND REPAIR WORK FLOW
PWO-21
< BASIC INSPECTION >
[AC 120 V OUTLET]
C
D
E
F
G
H
I
J
K
L
B
A
O
P
N
BASIC INSPECTION
DIAGNOSIS AND REPAIR WORK FLOW
Work Flow
INFOID:0000000009651882
OVERALL SEQUENCE
DETAILED FLOW
1.
INTERVIEW FOR MALFUNCTION
Interview the symptom to the customer.
JSMIA0396GB
PWO-22
< BASIC INSPECTION >
[AC 120 V OUTLET]
DIAGNOSIS AND REPAIR WORK FLOW
>> GO TO 2.
2.
SYMPTOM CHECK
Check the symptom from the customer's information.
>> GO TO 3.
3.
FAIL-SAFE ACTIVATION CHECK
Check that the symptom is applied to the fail-safe activation.
Does the fail-safe activate?
YES
>> GO TO 4.
NO
>> GO TO 5.
4.
SYSTEM DIAGNOSIS
Perform the system diagnosis for the system that the fail-safe activates. Specify the malfunctioning part.
>> GO TO 6.
5.
SYMPTOM DIAGNOSIS
Perform the symptom diagnosis. Specify the malfunctioning part.
>> GO TO 6.
6.
MALFUNCTIONING PART REPAIR
Repair or replace the malfunctioning part.
>> GO TO 7.
7.
REPAIR CHECK (OPERATION CHECK)
Check the operation of AC 120 V outlet.
Does it operate normally?
YES
>> INSPECTION END
NO
>> GO TO 3.
PWO
POWER SUPPLY AND GROUND CIRCUIT
PWO-23
< DTC/CIRCUIT DIAGNOSIS >
[AC 120 V OUTLET]
C
D
E
F
G
H
I
J
K
L
B
A
O
P
N
DTC/CIRCUIT DIAGNOSIS
POWER SUPPLY AND GROUND CIRCUIT
Diagnosis Procedure
INFOID:0000000009651883
1.
CHECK FUSE
Check that the following fuse is not blown.
Is the fuse fusing?
YES
>> Replace the blown fuse after repairing the affected circuit if a fuse is blown.
NO
>> GO TO 2.
2.
CHECK INVERTER UNIT POWER SUPPLY CIRCUIT
Check voltage between inverter unit harness connector and ground.
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> Repair or replace the inverter unit power supply circuit.
3.
CHECK INVERTER UNIT GROUND CIRCUIT
1.
Turn the ignition switch OFF.
2.
Disconnect the inverter unit connector.
3.
Check for continuity between inverter unit harness connector and ground.
Is the inspection result normal?
YES
>> INSPECTION END
NO
>> Repair or replace the inverter unit ground circuit.
Signal name
Fuse No.
Battery power supply
34
Terminal
Condition
Standard value
Voltage
(Approx.)
(+)
(–)
Inverter unit
Ground
Ignition switch
Connector
Terminal
B226
4
OFF
11.5 – 16 V
Battery voltage
Inverter unit
Ground
Continuity
Connector
Terminal
B226
8
Existed
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст