Nissan Quest E52. Instruction — part 617
EXL-72
< DTC/CIRCUIT DIAGNOSIS >
[XENON TYPE]
PARKING LAMP CIRCUIT
PARKING LAMP CIRCUIT
Component Function Check
INFOID:0000000009653053
1.
CHECK PARKING LAMP OPERATION
CONSULT ACTIVE TEST
1.
Select “EXTERNAL LAMPS” of IPDM E/R active test item.
2.
With operating the test items, check that the parking lamp is turned ON.
Is the inspection result normal?
YES
>> Parking lamp circuit is normal.
NO
>> Refer to
.
Diagnosis Procedure
INFOID:0000000009653054
1.
CHECK PARKING LAMP FUSE
1.
Turn ignition switch OFF.
2.
Check that the following fuse is not fusing.
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> GO TO 2.
2.
CHECK PARKING LAMP SHORT CIRCUIT
1.
Disconnect the following connectors.
-
IPDM E/R
-
Front combination lamp
-
Front side marker lamp
-
Headlamp aiming motor
2.
Check continuity between IPDM E/R harness connector and ground.
Is the inspection result normal?
YES
>> Replace fuse. (Replace IPDM E/R if fusing is found again.)
NO
>> Repair or replace harness. And then replace the fuse.
3.
CHECK PARKING LAMP BULB
Check applicable lamp bulb.
Is the inspection result normal?
YES
>> GO TO 4.
NO
>> Replace bulb.
4.
CHECK PARKING LAMP OUTPUT VOLTAGE
CONSULT ACTIVE TEST
TAIL
: Parking lamp ON
Off
: Parking lamp OFF
Unit
Location
Fuse No.
Capacity
• Parking lamp
• Front side marker lamp
IPDM E/R
#52
10 A
IPDM E/R
Ground
Continuity
Connector
Terminal
E346
91
Not existed
92
93
94
PARKING LAMP CIRCUIT
EXL-73
< DTC/CIRCUIT DIAGNOSIS >
[XENON TYPE]
C
D
E
F
G
H
I
J
K
M
A
B
EXL
N
O
P
1.
Disconnect front combination lamp connector.
2.
Turn ignition switch ON.
3.
Select “EXTERNAL LAMPS” of IPDM E/R active test item.
4.
With operating the test items, check voltage between IPDM E/R harness connector and ground.
Is the inspection result normal?
YES
>> GO TO 5.
NO
>> Replace IPDM E/R.
5.
CHECK PARKING LAMP OPEN CIRCUIT
1.
Turn ignition switch OFF.
2.
Disconnect IPDM E/R connector.
3.
Check continuity between IPDM E/R harness connector and front combination lamp harness connector.
Is the inspection result normal?
YES
>> GO TO 6.
NO
>> Repair or replace harness.
6.
CHECK PARKING LAMP GROUND OPEN CIRCUIT
Check continuity between front combination lamp harness connector and ground.
Is the inspection result normal?
YES
>> Check corresponding bulb socket and harness. Repair or replace if necessary.
NO
>> Repair or replace harness.
(+)
(
−
)
Test item
Voltage
(Approx.)
IPDM E/R
Connector
Terminal
RH
E346
91
Ground
EXTERNAL
LAMPS
TAIL
Battery voltage
Off
0 V
LH
92
TAIL
Battery voltage
Off
0 V
IPDM E/R
Front combination lamp
Continuity
Connector
Terminal
Connector
Terminal
RH
E346
91
E349
1
Existed
LH
92
E348
Front combination lamp
Ground
Continuity
Connector
Terminal
RH
E349
2
Existed
LH
E348
EXL-74
< DTC/CIRCUIT DIAGNOSIS >
[XENON TYPE]
FRONT SIDE MARKER LAMP CIRCUIT
FRONT SIDE MARKER LAMP CIRCUIT
Component Function Check
INFOID:0000000009653055
1.
CHECK PARKING LAMP OPERATION
Check that the parking lamp is turned ON.
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Check parking lamp circuit. Refer to
EXL-72, "Component Function Check"
2.
CHECK FRONT SIDE MARKER LAMP OPERATION
CONSULT ACTIVE TEST
1.
Select “EXTERNAL LAMPS” of IPDM E/R active test item.
2.
With operating the test items, check that the front side marker lamp is turned ON.
Is the inspection result normal?
YES
>> Front side marker lamp circuit is normal.
NO
>> Refer to
.
Diagnosis Procedure
INFOID:0000000009653056
1.
CHECK FRONT SIDE MARKER LAMP BULB
Check applicable lamp bulb.
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Replace bulb.
2.
CHECK FRONT SIDE MARKER LAMP OPEN CIRCUIT
1.
Turn ignition switch OFF.
2.
Disconnect IPDM E/R connector and front side marker lamp connector.
3.
Check continuity between IPDM E/R harness connector and front side marker lamp harness connector.
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> Repair or replace harness.
3.
CHECK FRONT SIDE MARKER LAMP GROUND OPEN CIRCUIT
Check continuity between front side marker lamp harness connector and ground.
Is the inspection result normal?
YES
>> Check corresponding bulb socket and harness. Repair or replace if necessary.
NO
>> Repair or replace harness.
TAIL
: Front side marker lamp ON
Off
: Front side marker lamp OFF
IPDM E/R
Front side marker lamp
Continuity
Connector
Terminal
Connector
Terminal
RH
E346
91
E321
1
Existed
LH
92
E320
Front side marker lamp
Ground
Continuity
Connector
Terminal
RH
E321
2
Existed
LH
E320
TAIL LAMP CIRCUIT
EXL-75
< DTC/CIRCUIT DIAGNOSIS >
[XENON TYPE]
C
D
E
F
G
H
I
J
K
M
A
B
EXL
N
O
P
TAIL LAMP CIRCUIT
Component Function Check
INFOID:0000000009653057
1.
CHECK TAIL LAMP OPERATION
CONSULT ACTIVE TEST
1.
Select “EXTERNAL LAMPS” of IPDM E/R active test item.
2.
With operating the test items, check that the tail lamp is turned ON.
Is the inspection result normal?
YES
>> Tail lamp circuit is normal.
NO
>> Refer to
.
Diagnosis Procedure
INFOID:0000000009653058
1.
CHECK TAIL LAMP FUSE
1.
Turn ignition switch OFF.
2.
Check that the following fuse is not fusing.
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> GO TO 2.
2.
CHECK TAIL LAMP SHORT CIRCUIT
1.
Disconnect IPDM E/R connector, licence plate lamp connector and rear combination lamp connector.
2.
Check continuity between IPDM E/R harness connector and ground.
Is the inspection result normal?
YES
>> Replace fuse. (Replace IPDM E/R if fusing is found again.)
NO
>> Repair or replace harness. And then replace the fuse.
3.
CHECK TAIL LAMP BULB
Check applicable lamp bulb.
Is the inspection result normal?
YES
>> GO TO 4.
NO
>> Replace bulb.
4.
CHECK TAIL LAMP OUTPUT VOLTAGE
CONSULT ACTIVE TEST
1.
Disconnect rear combination lamp connector.
2.
Turn ignition switch ON.
3.
Select “EXTERNAL LAMPS” of IPDM E/R active test item.
4.
With operating the test items, check voltage between IPDM E/R harness connector and ground.
TAIL
: Tail Lamp ON
Off
: Tail lamp OFF
Unit
Location
Fuse No.
Capacity
• Tail lamp
• license plate lamp
IPDM E/R
#53
10 A
IPDM E/R
Ground
Continuity
Connector
Terminal
E10
7
Not existed
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст