Nissan Quest E52. Instruction — part 655
EXL-224
< REMOVAL AND INSTALLATION >
[HALOGEN TYPE]
BACK-UP LAMP
BACK-UP LAMP
Exploded View
INFOID:0000000009653207
REMOVAL
DISASSEMBLY
Removal and Installation
INFOID:0000000009653208
CAUTION:
Disconnect the battery negative terminal or the fuse.
REMOVAL
1.
Back-up lamp assembly
N·m (kg-m, in-lb)
JMLIA2204GB
1.
Back-up lamp housing assembly
2.
Back-up lamp bulb
3.
Back-up lamp bulb socket
4.
Seal packing
: Always replace after every disassembly.
JMLIA2173ZZ
BACK-UP LAMP
EXL-225
< REMOVAL AND INSTALLATION >
[HALOGEN TYPE]
C
D
E
F
G
H
I
J
K
M
A
B
EXL
N
O
P
1.
Remove touch sensor.(with automatic back door) Refer to
DLK-477, "TOUCH SENSOR : Removal and
.
2.
Remove back door lower finisher. Refer to
INT-48, "BACK DOOR LOWER FINISHER : Removal and
.
3.
Disconnect back-up lamp connector.
4.
Remove back-up lamp mounting nuts, and then remove back-up lamp.
5.
Remove seal packing
INSTALLATION
Note the following item, and then install in the reverse order of removal.
CAUTION:
Seal packing cannot be reused.
Replacement
INFOID:0000000009653209
CAUTION:
• Disconnect the battery negative terminal or the fuse.
• Never touch the glass of bulb directly by hand. Keep grease and other oily matters away from it.
• Never touch bulb by hand while it is lit or right after being turned off.
• Never leave bulb out of lamp reflector for a long time because dust, moisture smoke, etc. may affect
the performance of lamp. When replacing bulb, be sure to replace it with new one.
BACK-UP LAMP BULB
1.
Remove back door lower finisher. Refer to
INT-48, "BACK DOOR LOWER FINISHER : Removal and
.
2.
Rotate back-up lamp bulb socket counterclockwise, and then remove back-up lamp bulb socket.
3.
Remove back-up lamp bulb from back-up lamp bulb socket.
EXL-226
< REMOVAL AND INSTALLATION >
[HALOGEN TYPE]
HIGH-MOUNTED STOP LAMP
HIGH-MOUNTED STOP LAMP
Exploded View
INFOID:0000000009653210
Removal and Installation
INFOID:0000000009653211
REMOVAL
1.
Remove rear spoiler. Refer to
EXT-45, "Removal and Installation"
.
2.
Remove high-mounted stop lamp mounting nuts.
3.
Remove high-mounted stop lamp from rear spoiler.
INSTALLATION
Install in the reverse order of removal.
1.
Rear spoiler
2.
High-mounted stop lamp
JMLIA1564ZZ
LICENSE PLATE LAMP
EXL-227
< REMOVAL AND INSTALLATION >
[HALOGEN TYPE]
C
D
E
F
G
H
I
J
K
M
A
B
EXL
N
O
P
LICENSE PLATE LAMP
Exploded View
INFOID:0000000009653212
Removal and Installation
INFOID:0000000009653213
CAUTION:
Disconnect the battery negative terminal or the fuse.
REMOVAL
1.
Remove back door lower finisher. Refer to
EXT-47, "Removal and Installation"
2.
Disconnect license plate lamp connector.
3.
Remove license plate lamp while pushing a resin clip, and then remove license plate lamp.
INSTALLATION
Install in the reverse order of removal.
Replacement
INFOID:0000000009653214
CAUTION:
• Disconnect the battery negative terminal or the fuse.
• Never touch the glass of bulb directly by hand. Keep grease and other oily matters away from it.
• Never touch bulb by hand while it is lit or right after being turned off.
• Never leave bulb out of lamp reflector for a long time because dust, moisture smoke, etc. may affect
the performance of lamp. When replacing bulb, be sure to replace it with new one.
LICENSE PLATE LAMP BULB
1.
Remove back door lower finisher. Refer to
EXT-47, "Removal and Installation"
2.
Disconnect license plate lamp connector.
3.
Rotate license plate lamp bulb socket counterclockwise and unlock it.
4.
Remove license plate lamp bulb from license plate lamp bulb socket.
1.
License plate lamp bulb socket
2.
License plate lamp bulb
3.
License plate lamp housing
4.
Back door finisher
: Clip
: Pawl
JMLIA2205ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст