Nissan Quest E52. Instruction — part 98
AV
PRECAUTIONS
AV-271
< PRECAUTION >
[BOSE AUDIO WITHOUT NAVIGATION]
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
• Be sure to turn ignition switch OFF and disconnect the battery cable from the negative terminal before
checking the circuit.
Precaution for Harness Repair
INFOID:0000000009652112
AV COMMUNICATION SYSTEM
• Solder the repaired parts, and wrap with tape. [Frays of twisted line
must be within 110 mm (4.33 in).]
• Do not perform bypass wire connections for the repair parts. (The
spliced wire will become separated and the characteristics of
twisted line will be lost.)
PKIA0306E
PKIA0307E
AV-272
< PREPARATION >
[BOSE AUDIO WITHOUT NAVIGATION]
PREPARATION
PREPARATION
PREPARATION
Commercial Service Tools
INFOID:0000000009652113
Tool
Description
Power tool
Loosening screws
PBIC0191E
AV
COMPONENT PARTS
AV-273
< SYSTEM DESCRIPTION >
[BOSE AUDIO WITHOUT NAVIGATION]
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
SYSTEM DESCRIPTION
COMPONENT PARTS
Component Parts Location
INFOID:0000000009652114
A.
Luggage side lower finisher is re-
moved.
B. Within luggage floor box
C. Rear pillar garnish (RH) is removed.
D. Cluster lid C is removed.
JSNIA4194ZZ
No.
Component
Function
1,17.
Front squawker
Refer to
2,16.
Front door woofer
3,14.
Slide door squawker
4,12.
Slide door speaker
5,10.
Luggage squawker
AV-274
< SYSTEM DESCRIPTION >
[BOSE AUDIO WITHOUT NAVIGATION]
COMPONENT PARTS
AV Control Unit
INFOID:0000000009652115
DESCRIPTION
• The AV control unit is equipped with the following parts. It is the
master unit integrated with functions and controls the multi-AV sys-
tem.
• Signals necessary for the vehicle information display function are
received from ECM and the combination meter via CAN communication.
• Signals necessary for vehicle setting functions are sent and received with BCM via CAN communication.
• It inputs the signal for driving status recognition (vehicle speed signal, reverse signal, and parking brake sig-
nal).
• A predictive course line is generated on the camera image from the rear view camera, and it is shown on the
front display.
• It inputs the signals for driving status recognition (vehicle speed, reverse and parking brake).
NOTE:
For details of each functions, refer to
AV-287, "MULTI AV SYSTEM : System Description"
AM/FM Electronic Tuner
The adoption of the PLL frequency synthesizer system enables the signal outputting with accurate frequen-
cies.
CD/DVD drive
• It is CD-R/CD-RW compliant and enables MP3 and WMA files to play music.
6.
Satellite radio tuner
Refer to
AV-284, "Satellite Radio Tuner"
7.
Woofer
Refer to
.
8.
Rear view camera
Refer to
9.
BOSE amp.
Refer to
.
11.
Satellite radio antenna
Refer to
AV-284, "Satellite Radio Antenna"
.
13.
Antenna amp.
Refer to
AV-281, "Antenna amp, Radio Antenna, and Antenna Feeder"
.
15.
Rear display unit
Refer to
.
18.
Center speaker
Refer to
.
19.
Microphone
Refer to
20.
Steering angle sensor
Refer to
AV-281, "Steering Angle Sensor"
.
21.
Steering switch
Refer to
.
22.
Auxiliary input jacks
Refer to
AV-281, "Auxiliary Input Jacks"
.
23.
USB connector
Refer to
24.
AV control unit
Refer to
.
25.
Disk eject switch
Refer to
26.
Preset switch
Refer to
AV-277, "Multifunction Switch"
27.
TEL adapter unit
Refer to
.
28.
TEL antenna
Refer to
29.
Multifunction switch
Refer to
AV-277, "Multifunction Switch"
30.
Front display unit
Refer to
No.
Component
Function
Units equipped
AM/FM electronic tuner
CD/DVD drive
USB interface
Camera controller
JSNIA2364ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст