Nissan Quest E52. Instruction — part 900
MWI
PREPARATION
MWI-5
< PREPARATION >
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
PREPARATION
PREPARATION
Commercial Service Tools
INFOID:0000000009651465
Tool name
Description
Power tool
Loosening screws
PBIC0191E
MWI-6
< SYSTEM DESCRIPTION >
COMPONENT PARTS
SYSTEM DESCRIPTION
COMPONENT PARTS
METER SYSTEM
METER SYSTEM : Component Parts Location
INFOID:0000000009651466
A.
Under the left second seat
JSNIA4335ZZ
No.
Component
Function
1.
ABS actuator and electric
unit (control unit)
Transmits the vehicle speed signal to the combination meter via CAN communication.
Refer to
BRC-9, "Component Parts Location"
for detailed installation location.
2.
Oil pressure switch
Transmits the oil pressure switch signal to the IPDM E/R.
Refer to
for detailed installation location.
3.
Washer level switch
Transmits the washer level switch signal to the combination meter.
4.
Ambient sensor
Transmits the ambient sensor signal to the IPDM E/R.
5.
TCM
Transmits the shift position signal to the combination meter via CAN communication.
Refer to
TM-10, "CVT CONTROL SYSTEM : Component Parts Location"
for detailed installation lo-
cation.
6.
ECM
Transmits the following signals to the combination meter via CAN communication.
• Engine speed signal
• Engine coolant temperature signal
• Fuel consumption monitor signal
• Fuel filler cap warning display signal
• Engine status signal
Refer to
EC-15, "ENGINE CONTROL SYSTEM : Component Parts Location"
for detailed installation
location.
MWI
COMPONENT PARTS
MWI-7
< SYSTEM DESCRIPTION >
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
METER SYSTEM : Combination Meter
INFOID:0000000009651467
The combination meter controls the following items according to the signals received from each unit via CAN
communication and the signals from switches and sensors.
• Measuring instruments
• Indicator lamps
• Warning lamps
• Meter illumination control
• Meter effect function
• Information display
ARRANGEMENT OF COMBINATION METER
7.
IPDM E/R
• Transmits the oil pressure switch signal to the BCM via CAN communication.
• Transmits the ambient sensor signal to the combination meter.
Refer to
PCS-4, "IPDM E/R : Component Parts Location"
for detailed installation location.
8.
BCM
Transmits the following signals to the combination meter via CAN communication.
• Position light request signal
• Door switch signal
• Door lock/unlock status signal
• Meter display signal
• Low tire pressure warning lamp signal
• Dimmer signal
• Starter relay status signal
• Oil pressure switch signal
Refer to
BCS-4, "BODY CONTROL SYSTEM : Component Parts Location"
location.
9.
Fuel level sensor unit
Transmits the fuel level sensor signal to the combination meter.
10.
Meter control switch
Transmits the following signals to the combination meter.
• Enter switch signal
• Select switch signal
• Trip reset switch signal
11.
Combination meter
Refer to
MWI-7, "METER SYSTEM : Combination Meter"
.
12.
Illumination control switch
Transmits the following signals to the combination meter.
• Illumination control switch signal (+)
• Illumination control switch signal (
−
)
13.
Parking brake switch
Transmits the parking brake switch signal to the combination meter.
14.
A/C auto amp. (with auto
A/C)
Transmits the A/C auto amp. connection recognition signal to the combination meter.
Refer to
HAC-8, "Component Parts Location"
for detailed installation location.
No.
Component
Function
JSNIA4133ZZ
MWI-8
< SYSTEM DESCRIPTION >
COMPONENT PARTS
METER SYSTEM : Meter Control Switch and Illumination Control Switch
INFOID:0000000009651468
• The meter control switch is located on the cluster lid A RH.
• The illumination control switch is located on the cluster lid A LH.
• Transmits the following signals to the combination meter.
- Illumination control switch signal (+)
- Illumination control switch signal (
−
)
- Enter switch signal
- Select switch signal
- Trip reset switch signal
A.
For U.S.A
B.
For Canada
JSNIA3342ZZ
Switch name
Description
Illumination control
switch
Illumination control switch (+) (1)
An illuminance level of the back light of the combination
meter can be adjusted.
Illumination control switch (
−
) (2)
Meter control switch
Enter switch (3)
• The information display screen can be switched.
• The item indicated on the information display can be con-
firmed.
Select switch (4)
When plural items are shown on the information display, a
selected item can be changed to the other item.
Trip reset switch (5)
• The trip meter can be switched between A and B.
• Trip meter A/B can be reset by pressing and holding the
trip reset switch.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст