Nissan Quest E52. Instruction — part 5
SYSTEM
ADP-13
< SYSTEM DESCRIPTION >
C
D
E
F
G
H
I
K
L
M
A
B
ADP
N
O
P
MANUAL FUNCTION
JMJIA6122GB
ADP-14
< SYSTEM DESCRIPTION >
SYSTEM
MANUAL FUNCTION : System Description
INFOID:0000000009649601
SYSTEM DIAGRAM
DESCRIPTION
• The driving position (seat and door mirror position) can be adjusted instructionly with power seat switch and
door mirror remote control switch.
• The power seat can be operated instructionly regardless of the ignition switch position.
• The door mirrors can be operated manually when ignition switch is in either ACC or ON position.
• When power seat switch is operated, operation signal is transmitted to driver seat control unit. Each motor is
operated according to operation signal.
• When mirror switch and changeover switch are operated, operation signal is transmitted to automatic drive
positioner control unit. Mirror motor is operated according to operation signal.
MEMORY FUNCTION
JMJIA5855GB
SYSTEM
ADP-15
< SYSTEM DESCRIPTION >
C
D
E
F
G
H
I
K
L
M
A
B
ADP
N
O
P
MEMORY FUNCTION : System Description
INFOID:0000000009649602
SYSTEM DIAGRAM
DESCRIPTION
• The driver seat control unit can store the optimum driving positions (seat and door mirror position) for 2 peo-
ple. If the front seat position is changed, one-touch (pressing desired memory switch) operation allows
changing to the other driving position.
• When memory switch 1 and 2 are operated, operation signal is transmitted to driver seat control unit.
• When driver seat control unit detects that memory switch is pressed for 0.5 seconds or more, driver seat
control unit operates each motor of driver seat and detects the driver seat position according to signals
transmitted from each sensor. Driver seat control unit requests the operation of mirror motor to automatic
drive positioner control unit via UART communication.
• Automatic drive positioner control unit operates mirror motor, detects the door mirror position according to
signal transmitted from mirror sensor, and transmits the detected door mirror position to driver seat control
unit via UART communication.
• Driver seat control unit stops the operation of each motor when each part reaches the memorized positions.
• Driver seat control unit turns memory indicator lamp OFF that is blinking while each motor operates.
NOTE:
Further information for the memory storage procedure. Refer to
.
JMJIA5856GB
ADP-16
< SYSTEM DESCRIPTION >
SYSTEM
Operation Condition
Satisfy all of the following items. The memory function is not performed if these items are not satisfied.
*: When timer function does not operate.
Timer Function
• The memory function can be performed for 45 seconds after opening the driver door even if the ignition
switch position is in OFF position.
• Satisfy all of the following items. The timer function is not performed if these items are not satisfied.
EXIT ASSIST FUNCTION
Item
Request status
Ignition position
ON
*
Switch inputs
• Power seat switch
• Door mirror control switch
• Set switch
• Memory switch
OFF
(Not operated)
CVT shift selector
P position
Memory function
Registered
Vehicle speed
0 km/h (0 MPH)
CONSULT
Not connected
Item
Request status
Ignition position
OFF
Set switch/memory switch
OFF
Memory function
Registered
CVT shift selector
P position
Front door switch (driver side)
OFF
CUNSULT
Not connected
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст