Nissan Quest E52. Instruction — part 1137

B1066, B1071 PASSENGER AIR BAG MODULE

SRC-77

< DTC/CIRCUIT DIAGNOSIS >

C

D

E

F

G

I

J

K

L

M

A

B

SRC

N

O

P

NO

>> INSPECTION END

SRC-78

< DTC/CIRCUIT DIAGNOSIS >

B1067, B1072 PASSENGER AIR BAG MODULE

B1067, B1072 PASSENGER AIR BAG MODULE

DTC Logic

INFOID:0000000009649897

DTC DETECTION LOGIC

DTC CONFIRMATION PROCEDURE

1.

CHECK SELF-DIAG RESULT

With CONSULT

1.

Turn ignition switch ON.

2.

Perform “Self Diagnostic Result” mode of “AIR BAG” using CONSULT.

Without CONSULT

1.

Turn ignition switch ON.

2.

Check the air bag warning lamp status. Refer to

SRC-15, "On Board Diagnosis Function"

.

NOTE:
SRS does not enter the diagnosis mode if no malfunction is detected in the user mode.

Is malfunctioning part detected?

YES

>> Refer to

SRC-78, "Diagnosis Procedure"

.

NO

>> INSPECTION END

Diagnosis Procedure

INFOID:0000000009649898

WARNING:

• Before servicing, turn ignition switch OFF, disconnect battery negative terminal, and wait at least 3

minutes or more. (To discharge backup capacitor.)

• Never use unspecified tester or other measuring device.

1.

CHECK HARNESS CONNECTOR

Check the harness connector.

Is the inspection result normal?

YES

>> GO TO 2.

NO

>> Replace harness connector.

2.

CHECK WIRING HARNESS

Check the wiring harness externals.

Is the inspection result normal?

YES

>> GO TO 3.

NO

>> Replace wiring harness.

3.

REPLACE AIR BAG DIAGNOSIS SENSOR UNIT

1.

Replace air bag diagnosis sensor unit. Refer to

SR-29, "Removal and Installation"

.

2.

Perform DTC confirmation procedure. Refer to

SRC-78, "DTC Logic"

.

Is DTC detected?

YES

>> GO TO 4.

NO

>> INSPECTION END

4.

REPLACE PASSENGER AIR BAG MODULE

1.

Replace passenger air bag module. Refer to

SR-18, "Removal and Installation"

2.

Perform DTC confirmation procedure. Refer to

SRC-78, "DTC Logic"

.

Is DTC detected?

YES

>> GO TO 1.

DTC

Display contents of

CONSULT

DTC detecting condition

Possible cause

B1067
B1072

ASSIST A/B MODULE
[GND-SHORT]

Passenger air bag module circuit is
shorted to ground

• Disconnection of wiring harness and short
• Malfunction in passenger air bag module
• Malfunction in air bag diagnosis sensor unit

B1067, B1072 PASSENGER AIR BAG MODULE

SRC-79

< DTC/CIRCUIT DIAGNOSIS >

C

D

E

F

G

I

J

K

L

M

A

B

SRC

N

O

P

NO

>> INSPECTION END

SRC-80

< DTC/CIRCUIT DIAGNOSIS >

B1068, B1073 PASSENGER AIR BAG MODULE

B1068, B1073 PASSENGER AIR BAG MODULE

DTC Logic

INFOID:0000000009649899

DTC DETECTION LOGIC

DTC CONFIRMATION PROCEDURE

1.

CHECK SELF-DIAG RESULT

With CONSULT

1.

Turn ignition switch ON.

2.

Perform “Self Diagnostic Result” mode of “AIR BAG” using CONSULT.

Without CONSULT

1.

Turn ignition switch ON.

2.

Check the air bag warning lamp status. Refer to

SRC-15, "On Board Diagnosis Function"

.

NOTE:
SRS does not enter the diagnosis mode if no malfunction is detected in the user mode.

Is malfunctioning part detected?

YES

>> Refer to

SRC-80, "Diagnosis Procedure"

.

NO

>> INSPECTION END

Diagnosis Procedure

INFOID:0000000009649900

WARNING:

• Before servicing, turn ignition switch OFF, disconnect battery negative terminal, and wait at least 3

minutes or more. (To discharge backup capacitor.)

• Never use unspecified tester or other measuring device.

1.

CHECK HARNESS CONNECTOR

Check the harness connector.

Is the inspection result normal?

YES

>> GO TO 2.

NO

>> Replace harness connector.

2.

CHECK WIRING HARNESS

Check the wiring harness externals.

Is the inspection result normal?

YES

>> GO TO 3.

NO

>> Replace wiring harness.

3.

REPLACE AIR BAG DIAGNOSIS SENSOR UNIT

1.

Replace air bag diagnosis sensor unit. Refer to

SR-29, "Removal and Installation"

.

2.

Perform DTC confirmation procedure. Refer to

SRC-80, "DTC Logic"

.

Is DTC detected?

YES

>> GO TO 4.

NO

>> INSPECTION END

4.

REPLACE PASSENGER AIR BAG MODULE

1.

Replace passenger air bag module. Refer to

SR-18, "Removal and Installation"

2.

Perform DTC confirmation procedure. Refer to

SRC-80, "DTC Logic"

.

Is DTC detected?

YES

>> GO TO 1.

DTC

Display contents of

CONSULT

DTC detecting condition

Possible cause

B1068
B1073

ASSIST A/B MODULE
[SHORT]

Passenger air bag module circuits are
shorted to each other

• Disconnection of wiring harness and short
• Malfunction in passenger air bag module
• Malfunction in air bag diagnosis sensor unit