Nissan Quest E52. Instruction — part 423
DLK-406
< SYMPTOM DIAGNOSIS >
AUTOMATIC SLIDING DOOR SYSTEM DOES NOT OPERATE
• Sliding door LH: Refer to
DLK-347, "SLIDING DOOR LH : Component Function Check"
• Sliding door RH: Refer to
DLK-349, "SLIDING DOOR RH : Component Function Check"
Is the inspection result normal?
YES
>> GO TO 5.
NO
>> Repair or replace the malfunctioning parts.
5.
CHECK SLIDING DOOR LOCK STATUS SWITCH
Check sliding door lock status switch.
• Sliding door LH: Refer to
DLK-334, "SLIDING DOOR LH : Component Function Check"
• Sliding door RH: Refer to
DLK-336, "SLIDING DOOR RH : Component Function Check"
Is the inspection result normal?
YES
>> GO TO 6.
NO
>> Repair or replace the malfunctioning parts.
6.
REPLACE SLIDING DOOR CONTROL UNIT
1.
Replace sliding door control unit. Refer to
DLK-500, "RH : Removal and Installation"
(RH) or
"LH : Removal and Installation"
(LH).
2.
Confirm the operation after replacement.
Is the result normal?
YES
>> INSPECTION END
NO
>> Check intermittent incident. Refer to
GI-42, "Intermittent Incident"
.
POWER ASSIST FUNCTION
POWER ASSIST FUNCTION : Description
INFOID:0000000009649390
Automatic sliding door system power assist function does not operate.
POWER ASSIST FUNCTION : Diagnosis Procedure
INFOID:0000000009649391
1.
CHECK DTC WITH SLIDING DOOR CONTROL UNIT
Check that DTC is not detected with sliding door control unit.
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Perform trouble diagnosis relevant to DTC indicated.
2.
CHECK AUTO OPEN/CLOSE FUNCTION
Check automatic sliding door system auto open/close function.
Does sliding door auto open/close with switches?
YES
>> GO TO 3.
NO
>> Refer to
DLK-412, "ALL SWITCHES : Diagnosis Procedure"
.
3.
REPLACE SLIDING DOOR CONTROL UNIT
1.
Replace sliding door control unit. Refer to
DLK-500, "RH : Removal and Installation"
(RH) or
"LH : Removal and Installation"
(LH).
2.
Confirm the operation after replacement.
Is the result normal?
YES
>> INSPECTION END
NO
>> Check intermittent incident. Refer to
GI-42, "Intermittent Incident"
.
UNLOCK-LINKED OPENING FUNCTION
UNLOCK-LINKED OPENING FUNCTION : Description
INFOID:0000000009649392
Automatic sliding door unlock-linked opening function does not operate.
UNLOCK-LINKED OPENING FUNCTION : Diagnosis Procedure
INFOID:0000000009649393
1.
CHECK DTC WITH SLIDING DOOR CONTROL UNIT
AUTOMATIC SLIDING DOOR SYSTEM DOES NOT OPERATE
DLK-407
< SYMPTOM DIAGNOSIS >
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
Check that DTC is not detected with sliding door control unit.
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Perform trouble diagnosis relevant to DTC indicated.
2.
CHECK ONE-TOUCH UNLOCK FUNCTION
Check automatic sliding door one-touch unlock function.
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> Refer to
DLK-405, "ONE-TOUCH UNLOCK FUNCTION : Diagnosis Procedure"
.
3.
REPLACE SLIDING DOOR CONTROL UNIT
1.
Replace sliding door control unit. Refer to
DLK-500, "RH : Removal and Installation"
"LH : Removal and Installation"
2.
Confirm the operation after replacement.
Is the result normal?
YES
>> INSPECTION END
NO
>> Check intermittent incident. Refer to
GI-42, "Intermittent Incident"
.
HOLD FUNCTION
HOLD FUNCTION : Description
INFOID:0000000009649394
Automatic sliding door system hold function does not operate.
HOLD FUNCTION : Diagnosis Procedure
INFOID:0000000009649395
1.
CHECK DTC WITH SLIDING DOOR CONTROL UNIT
Check that DTC is not detected with sliding door control unit.
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Perform trouble diagnosis relevant to DTC indicated.
2.
CHECK SLIDING DOOR HANDLE SWITCH
Check sliding door handle switch.
• Sliding door LH: Refer to
DLK-326, "SLIDING DOOR LH : Component Function Check"
• Sliding door RH: Refer to
DLK-328, "SLIDING DOOR RH : Component Function Check"
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> Repair or replace the malfunctioning parts.
3.
CHECK CLUTCH
Check clutch.
• Sliding door LH: Refer to
DLK-355, "SLIDING DOOR LH : Component Function Check"
• Sliding door RH: Refer to
DLK-356, "SLIDING DOOR RH : Component Function Check"
Is the inspection result normal?
YES
>> GO TO 4.
NO
>> Repair or replace the malfunctioning parts.
4.
CHECK FULL LATCH SWITCH
Check full latch switch.
• Sliding door LH: Refer to
DLK-318, "SLIDING DOOR LH : Component Function Check"
• Sliding door RH: Refer to
DLK-320, "SLIDING DOOR RH : Component Function Check"
Is the inspection result normal?
YES
>> GO TO 5.
NO
>> Repair or replace the malfunctioning parts.
5.
CHECK HALF LATCH SWITCH
DLK-408
< SYMPTOM DIAGNOSIS >
AUTOMATIC SLIDING DOOR SYSTEM DOES NOT OPERATE
Check half latch switch.
Refer to
DLK-296, "SLIDING DOOR CONTROL UNIT : Component Function Check"
.
Is the inspection result normal?
YES
>> GO TO 6.
NO
>> Repair or replace the malfunctioning parts.
6.
REPLACE SLIDING DOOR CONTROL UNIT
1.
Replace sliding door control unit. Refer to
DLK-500, "RH : Removal and Installation"
(RH) or
"LH : Removal and Installation"
(LH).
2.
Confirm the operation after replacement.
Is the result normal?
YES
>> INSPECTION END
NO
>> Check intermittent incident. Refer to
GI-42, "Intermittent Incident"
.
ANTI-PINCH FUNCTION
ANTI-PINCH FUNCTION : Description
INFOID:0000000009649396
Automatic sliding door system anti-pinch function does not operate.
ANTI-PINCH FUNCTION : Diagnosis Procedure
INFOID:0000000009649397
1.
CHECK DTC WITH SLIDING DOOR CONTROL UNIT
Check that DTC is not detected with sliding door control unit.
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Perform trouble diagnosis relevant to DTC indicated.
2.
CHECK SLIDING DOOR TOUCH SENSOR
Check sliding door touch sensor.
• Sliding door LH: Refer to
DLK-351, "SLIDING DOOR LH : Component Function Check"
• Sliding door RH: Refer to
DLK-353, "SLIDING DOOR RH : Component Function Check"
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> Repair or replace the malfunctioning parts.
3.
CHECK ENCODER
Check encoder.
• Sliding door LH: Refer to
DLK-311, "SLIDING DOOR LH : Component Function Check"
.
• Sliding door RH: Refer to
DLK-312, "SLIDING DOOR RH : Component Function Check"
Is the inspection result normal?
YES
>> GO TO 4.
NO
>> Repair or replace the malfunctioning parts.
4.
CHECK FULL LATCH SWITCH
Check full latch switch.
• Sliding door LH: Refer to
DLK-318, "SLIDING DOOR LH : Component Function Check"
• Sliding door RH: Refer to
DLK-320, "SLIDING DOOR RH : Component Function Check"
Is the inspection result normal?
YES
>> GO TO 5.
NO
>> Repair or replace the malfunctioning parts.
5.
CHECK SLIDING DOOR LOCK STATUS SWITCH
Check sliding door lock status switch.
• Sliding door LH: Refer to
DLK-334, "SLIDING DOOR LH : Component Function Check"
• Sliding door RH: Refer to
DLK-336, "SLIDING DOOR RH : Component Function Check"
Is the inspection result normal?
YES
>> GO TO 6.
AUTOMATIC SLIDING DOOR SYSTEM DOES NOT OPERATE
DLK-409
< SYMPTOM DIAGNOSIS >
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
NO
>> Repair or replace the malfunctioning parts.
6.
CHECK SLIDING DOOR SWITCH
Check sliding door switch.
• Sliding door LH: Refer to
DLK-315, "SLIDING DOOR LH : Component Function Check"
• Sliding door RH: Refer to
DLK-316, "SLIDING DOOR RH : Component Function Check"
Is the inspection result normal?
YES
>> GO TO 7.
NO
>> Repair or replace the malfunctioning parts.
7.
REPLACE SLIDING DOOR CONTROL UNIT
1.
Replace sliding door control unit. Refer to
DLK-500, "RH : Removal and Installation"
"LH : Removal and Installation"
2.
Confirm the operation after replacement.
Is the result normal?
YES
>> INSPECTION END
NO
>> Check intermittent incident. Refer to
GI-42, "Intermittent Incident"
.
INTERMITTENT CLUTCH FUNCTION
INTERMITTENT CLUTCH FUNCTION : Description
INFOID:0000000009649398
Automatic sliding door system intermittent clutch function does not operate.
INTERMITTENT CLUTCH FUNCTION : Diagnosis Procedure
INFOID:0000000009649399
1.
CHECK DTC WITH SLIDING DOOR CONTROL UNIT
Check that DTC is not detected with sliding door control unit.
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Perform trouble diagnosis relevant to DTC indicated.
2.
CHECK CLUTCH
Check clutch.
• Sliding door LH: Refer to
DLK-355, "SLIDING DOOR LH : Component Function Check"
• Sliding door RH: Refer to
DLK-356, "SLIDING DOOR RH : Component Function Check"
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> Repair or replace the malfunctioning parts.
3.
REPLACE SLIDING DOOR CONTROL UNIT
1.
Replace sliding door control unit. Refer to
DLK-500, "RH : Removal and Installation"
"LH : Removal and Installation"
2.
Confirm the operation after replacement.
Is the result normal?
YES
>> INSPECTION END
NO
>> Check intermittent incident. Refer to
GI-42, "Intermittent Incident"
.
HAZARD AND BUZZER REMINDER FUNCTION
HAZARD AND BUZZER REMINDER FUNCTION : Description
INFOID:0000000009649400
Automatic sliding door system hazard and buzzer reminder function does not operate.
HAZARD AND BUZZER REMINDER FUNCTION : Diagnosis Procedure
INFOID:0000000009649401
1.
CHECK DTC WITH SLIDING DOOR CONTROL UNIT
Check that DTC is not detected with sliding door control unit.
Is the inspection result normal?
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст