Nissan Pathfinder (2011 year). Instruction — part 143
DLK-10
< BASIC INSPECTION >
[WITH INTELLIGENT KEY SYSTEM]
INSPECTION AND ADJUSTMENT
INSPECTION AND ADJUSTMENT
ADDITIONAL SERVICE WHEN REPLACING CONTROL UNIT
ADDITIONAL SERVICE WHEN REPLACING CONTROL UNIT : Description
INFOID:0000000006245400
Perform the system initialization when replacing BCM, replacing Intelligent Key or registering an additional
Intelligent Key.
ADDITIONAL SERVICE WHEN REPLACING CONTROL UNIT : Special Repair Re-
quirement
INFOID:0000000006245401
Refer to the CONSULT-III Operation Instruction for the initialization procedure.
2011 Pathfinder
AUTOMATIC DOOR LOCKS
DLK-11
< SYSTEM DESCRIPTION >
[WITH INTELLIGENT KEY SYSTEM]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
SYSTEM DESCRIPTION
AUTOMATIC DOOR LOCKS
System Diagram
INFOID:0000000006245402
System Description
INFOID:0000000006245403
DOOR LOCK FUNCTION
• The door lock and unlock switch (driver side) is built into power window main switch.
• The door lock and unlock switch (passenger side) is on door trim.
• Interlocked with the locking operation of door lock and unlock switch, door lock actuators of all doors are
locked.
• Interlocked with the unlocking operation of door lock and unlock switch, door lock actuators of all doors are
unlocked.
Door Key Cylinder
• With the door key inserted in the door key cylinder on driver side, turning it to “LOCK”, will lock door lock
actuator of all doors.
• With the door key inserted in the door key cylinder on driver side, turning it to “UNLOCK” once unlocks the
driver side door lock actuator; turning it to “UNLOCK” again within 5 seconds after the first unlock operation
unlocks all of the other doors. - (SELECTIVE UNLOCK OPERATION)
Selective unlock operation mode can be changed using “DOOR LOCK-UNLOCK SET” mode in “WORK SUP-
PORT”. Refer to
DLK-41, "DOOR LOCK : CONSULT-III Function (BCM - DOOR LOCK)"
AUTOMATIC DOOR LOCKS (LOCK OPERATION)
The interlock door lock function is the function that locks all doors linked with the vehicle speed.
Vehicle Speed Sensing Auto Door Lock*1
All doors are locked when the vehicle speed reaches 24 km/h (15 MPH) or more.
BCM outputs the lock signal to all door lock actuators when it detects that the ignition switch is turned ON, all
doors are closed and the vehicle speed received from the combination meter via CAN communication
becomes 24 km/h (15 MPH) or more.
ALKIA1482GB
Input
Single
Function
Actuator
Door lock/unlock switch
Door lock/unlock signal
Door lock function
Each door lock actuator
Door key cylinder switch
Each door switch
Door open/close signal
Key reminder function
Combination meter
Warning buzzer signal
Vehicle speed signal
Automatic door lock/unlock
function
TCM
Shift position signal
2011 Pathfinder
DLK-12
< SYSTEM DESCRIPTION >
[WITH INTELLIGENT KEY SYSTEM]
AUTOMATIC DOOR LOCKS
If a door is opened and closed at any time during one ignition cycle (OFF
→
ON), even after initial auto door
lock has taken place, the BCM will relock all doors when the vehicle speed reaches 24 km/h (15 MPH) or more
again.
Setting change of Automatic Door Locks (LOCK) Function
The lock operation setting of the automatic door locks function can be changed.
With CONSULT-III
The ON/OFF switching of the automatic door locks (LOCK) function and the type selection of the automatic
door locks (LOCK) function can be performed at the WORK SUPPORT setting of CONSULT-III. Refer to
41, "DOOR LOCK : CONSULT-III Function (BCM - DOOR LOCK)"
Without CONSULT- III
The automatic door locks (LOCK) function can be switched ON/OFF by performing the following operation.
1. Close all doors (door switch OFF).
2. Turn ignition switch ON.
3. Within 20 seconds of turning the ignition switch ON, press and hold the door lock and unlock switch to the
LOCK position for more than 5 seconds.
4. The switching is completed when the hazard lamps blink.
5. The ignition switch must be turned OFF and ON again between each setting change.
AUTOMATIC DOOR LOCKS (UNLOCK OPERATION)
The automatic door locks (UNLOCK) function is the function that unlocks all doors linked with the key position.
IGN OFF Interlock Door Unlock*1
All doors are unlocked when the power supply position is changed from ON to OFF.
BCM outputs the unlock signal to all door lock actuators when it detects that the power supply position is
changed from ignition switch ON to OFF.
Setting change of Automatic Door Locks (UNLOCK) Function
The lock operation setting of the automatic door locks function can be changed.
With CONSULT-III
The ON/OFF switching of the automatic door locks (UNLOCK) function and the type selection of the automatic
door locks (UNLOCK) function can be performed at the WORK SUPPORT setting of CONSULT-III. Refer to
DLK-41, "DOOR LOCK : CONSULT-III Function (BCM - DOOR LOCK)"
.
Without CONSULT- III
The automatic door locks (UNLOCK) function can be switched ON/OFF by performing the following operation.
1. Close all doors (door switch OFF).
2. Turn ignition switch ON.
3. Within 20 seconds of turning the ignition switch ON, press and hold the door lock and unlock switch to the
UNLOCK position for more than 5 seconds.
4. The switching is completed when the hazard lamps blink.
5. The ignition switch must be turned OFF and ON again between each setting change.
*1: This function is set to ON before delivery.
OFF
→
ON
: 2 blinks
ON
→
OFF
: 1 blink
OFF
→
ON
: 2 blinks
ON
→
OFF
: 1 blink
2011 Pathfinder
AUTOMATIC DOOR LOCKS
DLK-13
< SYSTEM DESCRIPTION >
[WITH INTELLIGENT KEY SYSTEM]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
Component Parts Location
INFOID:0000000006245404
Component Description
INFOID:0000000006245405
ALKIA1845ZZ
1.
Key switch and ignition knob switch M66 2.
BCM M18, M19, M20
3.
Front door lock assembly LH (key
cylinder switch) D14
Front door lock actuator RH D114
4.
Main power window and door lock/un-
lock switch D7, D8
5.
Front door switch LH B8
RH B108
6.
Rear door switch LH B18
RH B116
7.
Power window and door lock/unlock
switch RH D105
8.
Back door latch (door ajar switch) D502 9.
Rear door lock actuator LH D205
RH D305
10. Combination meter M24
Item
Function
BCM
Controls the door lock function and room lamp function.
Door lock and unlock switch
Input lock or unlock signal to BCM.
2011 Pathfinder
DLK-14
< SYSTEM DESCRIPTION >
[WITH INTELLIGENT KEY SYSTEM]
AUTOMATIC DOOR LOCKS
Door lock actuator
Output lock/unlock signal from BCM and locks/unlocks each door.
Door switch
Input door open/close condition to BCM.
Door key cylinder switch
• Input lock or unlock signal to main power window and door lock/unlock switch.
• Main power window and door lock/unlock switch transmits door lock/unlock signal to BCM.
Combination meter
• Receive buzzer signal from BCM via CAN communication line, and sounds the buzzer.
• Transmits vehicle speed signal to CAN communication line.
Item
Function
2011 Pathfinder
DOOR LOCK FUNCTION
DLK-15
< SYSTEM DESCRIPTION >
[WITH INTELLIGENT KEY SYSTEM]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
DOOR LOCK FUNCTION
DOOR LOCK AND UNLOCK SWITCH
DOOR LOCK AND UNLOCK SWITCH : System Diagram
INFOID:0000000006245406
DOOR LOCK AND UNLOCK SWITCH : System Description
INFOID:0000000006245407
DOOR LOCK FUNCTION
Functions Available by Operating the Door Lock and Unlock Switches on Driver Door and Passenger Door
• Interlocked with the locking operation of door lock and unlock switch, door lock actuators of all doors are
locked, back door opener switch is disabled, and mechanical glass hatch switch is disabled.
• Interlocked with the unlocking operation of door lock and unlock switch, door lock actuators of all doors are
unlocked, back door opener switch is enabled, and mechanical glass hatch switch is enabled.
• When the back door opener switch is pressed, the Intelligent Key unit terminal 24 receives signal from the
back door opener switch terminal 1.
• The Intelligent Key unit checks the transmission range switch position and vehicle speed. If the back door
operating enable conditions are met, it sends a signal through terminal 23 to the BCM terminal 30.
• When the BCM receives the signal, if the back door operating enable conditions are met, it sends a signal
through terminal 53 to open the back door latch.
Functions Available by Operating the Key Cylinder Switch on Driver Door
• Interlocked with the locking operation of door key cylinder, door lock actuators of all doors are locked, back
door opener switch is disabled, and mechanical glass hatch switch is disabled.
Selective Unlock Operation
• When door key cylinder is unlocked, door lock actuator driver side is unlocked.
• When door key cylinder is unlocked for the second time within 5 seconds after the first operation, door lock
actuators on all doors are unlocked.
Select unlock operation mode can be changed using DOOR LOCK-UNLOCK SET mode in “WORK SUP-
PORT”. Refer to
DLK-41, "DOOR LOCK : CONSULT-III Function (BCM - DOOR LOCK)"
Key Reminder System
ALKIA0178GB
Switch
Input/output signal to BCM
BCM function
Actuator
Main power window and door
lock/unlock switch
Door lock/unlock signal
Door lock/unlock control
Door lock actuators
Power window and door lock/
unlock switch
Door key cylinder switch
2011 Pathfinder
DLK-16
< SYSTEM DESCRIPTION >
[WITH INTELLIGENT KEY SYSTEM]
DOOR LOCK FUNCTION
DOOR LOCK AND UNLOCK SWITCH : Component Parts Location
INFOID:0000000006245408
DOOR LOCK AND UNLOCK SWITCH : Component Description
INFOID:0000000006245409
1.
Key switch and ignition knob switch M66 2.
BCM M18, M19, M20
(view with instrument panel removed)
3.
Front door lock assembly LH (key
cylinder switch) D14
Front door lock actuator RH D114
4.
Main power window and door lock/un-
lock switch D7, D8
5.
Front door switch
LH B8
RH B108
6.
Rear door switch
LH B18
RH B116
7.
Power window and door lock/unlock
switch RH D105
8.
Back door latch (door ajar switch)
D502
9.
Rear door lock actuator
LH D205
RH D305
10. Passenger select unlock relay M11
(view with instrument panel LH removed)
ALKIA1846ZZ
Item
Function
BCM
Controls the door lock function and room lamp function.
Door lock and unlock switch
Transmits lock or unlock signal to BCM.
Door lock actuator
Receives lock/unlock signal from BCM and locks/unlocks each door.
2011 Pathfinder
DOOR LOCK FUNCTION
DLK-17
< SYSTEM DESCRIPTION >
[WITH INTELLIGENT KEY SYSTEM]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
DOOR REQUEST SWITCH
DOOR REQUEST SWITCH : System Diagram
INFOID:0000000006245410
DOOR REQUEST SWITCH : System Description
INFOID:0000000006245411
Only when pressing the request switch, it is possible to lock and unlock the door by carrying the Intelligent
Key.
• The Intelligent Key system is a system that makes it possible to lock and unlock the door locks (door lock/
unlock function) by carrying the Intelligent Key, which operates based on the results of electronic ID verifica-
tion using two-way communications between the Intelligent Key and the vehicle (BCM).
CAUTION:
The driver should always carry the Intelligent Key
• If an action that does not meet the operating conditions of the Intelligent Key system is taken, the buzzer
goes off to inform the driver (Warning chime function).
• When a door lock is locked or unlocked with request switch or remote controller button operation, the hazard
lamps flash and the Intelligent Key warning buzzer or horn sounds (Hazard and buzzer/horn reminder func-
tion).
• The settings for each function can be changed with the CONSULT-III.
• If an Intelligent Key is lost, a new Intelligent Key can be registered. A maximum of 4 Intelligent Keys can be
registered.
• It is possible to perform a diagnosis on the system and register an Intelligent Key with the CONSULT-III.
OPERATION DESCRIPTION/DOOR LOCK/UNLOCK
• When the BCM detects that each door request switch is pressed, it starts the outside key antenna and inside
key antenna corresponding to the pressed door request switch and transmits the request signal to the Intelli-
gent Key. And then, check that the Intelligent Key is near the door.
• If the Intelligent Key is within the outside key antenna detection area, it receives the request signal and
transmits the key ID signal to the BCM via remote keyless entry receiver.
• BCM receives the key ID signal and compares it with the registered key ID.
• BCM sends the door lock/unlock signal and sounds Intelligent Key buzzer warning (lock: 2 times, unlock: 1
time) at the same time as a reminder.
OPERATION CONDITION
If the following conditions are not satisfied, door lock/unlock operation is not performed even if the request
switch is operated.
Door switch
Transmits door open/close condition to BCM.
Passenger select unlock relay
Enables or disables the unlocking of rear doors when this Intelligent Key option is selected.
Item
Function
ALKIA1698GB
2011 Pathfinder
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст