Nissan Pathfinder (2011 year). Instruction — part 528
REAR SUSPENSION MEMBER
RSU-19
< UNIT REMOVAL AND INSTALLATION >
C
D
F
G
H
I
J
K
L
M
A
B
RSU
N
O
P
UNIT REMOVAL AND INSTALLATION
REAR SUSPENSION MEMBER
Removal and Installation
INFOID:0000000006245815
COMPONENTS
REMOVAL
1. Remove both rear wheel and tire assemblies. Refer to
.
2. Remove the spare tire.
1.
Seat belt latch anchor
2.
Stabilizer bar bushing
3.
Stabilizer bar clamp
4.
Stabilizer bar
5.
Connecting rod
6.
Front lower link
7.
Knuckle
8.
Bushing
9.
Rear lower link
10. Shock absorber
11. Suspension arm
12. Lower rubber seat
13. Coil spring
14. Upper rubber seat
15. Rear suspension member
16. Spare tire bracket
17. Bound bumper
AWEIA0191GB
2011 Pathfinder
RSU-20
< UNIT REMOVAL AND INSTALLATION >
REAR SUSPENSION MEMBER
3. Remove the brake caliper without disconnecting the brake hoses, using power tool. Reposition the brake
caliper out of the way using a suitable wire. Refer to
BR-48, "Removal and Installation of Brake Caliper
.
CAUTION:
• Do not crimp or stretch the brake hose when repositioning the brake caliper out of the way.
• Do not press the brake pedal while the brake caliper is positioned out of the way.
4. Remove the two rear brake rotors.
5. Remove the two rear drive shafts. Refer to
RAX-8, "Removal and Installation"
6. Disconnect the parking brake cables brackets from the rear suspension member.
7. Disconnect the two rear wheel sensor connectors and harness clips.
8. Remove the rear final drive vent tube from the rear suspension member and frame.
9. Remove the rear final drive. Refer to
DLN-425, "Removal and Installation"
10. Set a suitable jack to support each of the rear lower links and the
coil spring tension.
11. Remove both of the rear lower link outer bolts using power tool,
and lower the jack to remove the rear coil springs, and the upper
and lower rubber seats.
12. Remove the two bolts to disconnect the seat belt latch anchor
from the rear suspension member using power tool.
13. Disconnect both of the connecting rods from the rear stabilizer
bar.
LEIA0077E
LEIA0109E
LEIA0111E
2011 Pathfinder
REAR SUSPENSION MEMBER
RSU-21
< UNIT REMOVAL AND INSTALLATION >
C
D
F
G
H
I
J
K
L
M
A
B
RSU
N
O
P
14. Set a suitable jack under each front lower link for support and
remove the shock absorber upper end bolts and lower end bolts
using power tool.
15. Remove both of the shock absorbers.
16. Set a suitable jack under the rear suspension member.
17. Remove the six rear suspension member bolts using power tool.
18. Slowly lower the jack supporting the rear suspension member to
access the fuel filler tube bracket, then remove the two bolts to
disconnect the fuel filler tube bracket from the rear suspension
member.
19. Slowly lower the jack to remove the rear suspension member, suspension arm, front and rear lower links,
knuckles, and stabilizer bar as an assembly.
20. Remove the suspension arm, spare tire bracket, stabilizer bar, front and rear lower links, and the knuckles
from the rear suspension member using power tool.
INSPECTION AFTER REMOVAL
Check rear suspension member for deformation, cracks, and other damage and replace if necessary.
INSTALLATION
Installation is in the reverse order of removal.
• When raising the rear suspension member assembly, use the
locating pins to align the rear suspension member to the vehicle
body.
LEIA0110E
LEIA0114E
LEIA0083E
2011 Pathfinder
RSU-22
< UNIT REMOVAL AND INSTALLATION >
REAR SUSPENSION MEMBER
• When installing the upper and lower rubber seats for the rear coil
springs, the arrow embossed on the rubber seats must point out
toward the wheel and tire assembly.
• Perform final tightening of the nuts and bolts for the links (with rubber bushings) under unladen conditions
with the tires on level ground.
• Adjust the parking brake cables. Refer to
.
• Check the wheel alignment. Refer to
FSU-7, "Front Wheel Alignment"
.
LEIA0076E
2011 Pathfinder
SERVICE DATA AND SPECIFICATIONS (SDS)
RSU-23
< SERVICE DATA AND SPECIFICATIONS (SDS)
C
D
F
G
H
I
J
K
L
M
A
B
RSU
N
O
P
SERVICE DATA AND SPECIFICATIONS (SDS)
SERVICE DATA AND SPECIFICATIONS (SDS)
Wheel Alignment (Unladen*)
INFOID:0000000006245816
*1: Fuel, radiator coolant and engine oil full. Spare tire, jack, hand tools and mats in designed positions.
Ball Joint
INFOID:0000000006245817
Camber
Degree minute (decimal degree)
Minimum
- 0
°
32
′
(- 0.53
°
)
Nominal
- 0
°
2
′
(- 0.03
°
)
Maximum
0
°
28
′
(0.47
°
)
Total toe-in
Distance (A – B)
Minimum
Out 1.4 mm (0.05 in)
Nominal
In 1.9 mm (0.07 in)
Maximum
In 5.2 mm (0.20 in)
Angle
Degree minute (decimal degree)
Minimum
Out 0
°
3
′
36
″
(0.06
°
)
Nominal
In 0
°
8
′
24
″
(0.14
°
)
Maximum
In 0
°
20
′
24
″
(0.34
°
)
SFA234AC
Ball joint position
Upper
Lower
WEIA0131E
2011 Pathfinder
RSU-24
< SERVICE DATA AND SPECIFICATIONS (SDS)
SERVICE DATA AND SPECIFICATIONS (SDS)
*: Measurement point is at the bolt groove of the ball stud.
Wheelarch Height (Unladen*)
INFOID:0000000006245818
Unit: mm (in)
*1: Fuel, radiator coolant and engine oil full. Spare tire, jack, hand tools and mats in designated positions.
Swinging force* (A)
11.4 - 145.5 N (1.16 - 14.8 kg, 2.56 - 32.7 lb)
11.0 - 140.7 N (1.12 - 14.35 kg, 2.47 - 31.63 lb)
Turning torque (B)
0.5 - 6.4 N·m (0.06 - 0.65 kg-m, 5 - 56 in-lb)
0.5 - 6.4 N·m (0.06 - 0.65 kg-m, 5 - 56 in-lb)
Vertical end play (C)
0 mm (0 in)
0 mm (0 in)
Height (D)
44 mm (1.73 in)
45.5 mm (1.79 in)
Engine
VQ40DE
VK56DE
Drive type
2WD
4WD
4WD
Tire size
P245/75R16
P265/65R17
P265/60R18
P245/75R16
P265/65R17 P265/60R18
P265/60R18
Front wheelarch height
(Hf)
867
(34.13)
865
(34.06)
867
(34.13)
875
(34.45)
874
(34.41)
891
(35.08)
876
(34.49)
Rear wheelarch height
(Hr)
875
(34.45)
873
(34.37)
875
(34.45)
884
(34.80)
883
(34.76)
901
(35.47)
886
(34.88)
LEIA0085E
2011 Pathfinder
SB-1
RESTRAINTS
C
D
E
F
G
I
J
K
L
M
SECTION
SB
A
B
SB
N
O
P
CONTENTS
SEAT BELT
PRECAUTION . . . . . . . . . . . ...
PRECAUTIONS . . . . . . . . . . . . ...
Precaution for Seat Belt Service . . . . . . . ...
Precaution Necessary for Steering Wheel Rota-
tion After Battery Disconnect . . . . . . . . .....
REMOVAL AND INSTALLATION . . . .
SEAT BELTS . . . . . . . . . . . . . .
Removal and Installation of Front Seat Belt . . . .
Removal and Installation of Rear Seat Belt . . . ..
Removal and Installation of Third Row Seat Belt . .
Seat Belt Inspection . . . . . . . . . . . . ..
LATCH (LOWER ANCHORS AND TETHER
FOR CHILDREN) SYSTEM . . . . . . . ...
Removal and Installation . . . . . . . . . . .
TOP TETHER STRAP CHILD RESTRAINT . .
Removal and Installation . . . . . . . . . . .
2011 Pathfinder
SB-2
< PRECAUTION >
PRECAUTIONS
PRECAUTION
PRECAUTIONS
Precaution for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT BELT
PRE-TENSIONER"
INFOID:0000000006245390
The Supplemental Restraint System such as “AIR BAG” and “SEAT BELT PRE-TENSIONER”, used along
with a front seat belt, helps to reduce the risk or severity of injury to the driver and front passenger for certain
types of collision. This system includes seat belt switch inputs and dual stage front air bag modules. The SRS
system uses the seat belt switches to determine the front air bag deployment, and may only deploy one front
air bag, depending on the severity of a collision and whether the front occupants are belted or unbelted.
Information necessary to service the system safely is included in the SR and SB section of this Service Man-
ual.
WARNING:
• To avoid rendering the SRS inoperative, which could increase the risk of personal injury or death in
the event of a collision which would result in air bag inflation, all maintenance must be performed by
an authorized NISSAN/INFINITI dealer.
• Improper maintenance, including incorrect removal and installation of the SRS, can lead to personal
injury caused by unintentional activation of the system. For removal of Spiral Cable and Air Bag
Module, see the SR section.
• Do not use electrical test equipment on any circuit related to the SRS unless instructed to in this
Service Instruction. SRS wiring harnesses can be identified by yellow and/or orange harnesses or har-
ness connectors.
PRECAUTIONS WHEN USING POWER TOOLS (AIR OR ELECTRIC) AND HAMMERS
WARNING:
• When working near the Airbag Diagnosis Sensor Unit or other Airbag System sensors with the Igni-
tion ON or engine running, DO NOT use air or electric power tools or strike near the sensor(s) with a
hammer. Heavy vibration could activate the sensor(s) and deploy the air bag(s), possibly causing
serious injury.
• When using air or electric power tools or hammers, always switch the Ignition OFF, disconnect the
battery, and wait at least 3 minutes before performing any service.
Precaution for Seat Belt Service
INFOID:0000000006245391
CAUTION:
• Before removing the seat belt pre-tensioner assembly, turn the ignition switch OFF, disconnect both
battery cables and wait at least 3 minutes.
• After replacing or reinstalling seat belt pre-tensioner assembly, or reconnecting seat belt pre-ten-
sioner assembly connector, ensure entire SRS operates properly. Refer to
• Do not disassemble buckle or seat belt assembly.
• Do not reuse seat belt anchor bolts after removal. Replace with new ones.
• Replace anchor bolts if they are deformed or worn out.
• Never oil tongue and buckle.
• If any component of seat belt assembly is questionable, do not repair. Replace the whole seat belt
assembly.
• If webbing is cut, frayed, or damaged, replace seat belt assembly.
• When replacing seat belt assembly, use a genuine NISSAN seat belt assembly.
AFTER A COLLISION
WARNING:
• Inspect all seat belt assemblies including retractors and attaching hardware after any collision.
• NISSAN recommends that all seat belt assemblies in use during a collision be replaced unless the
collision was minor and the belts show no damage and continue to operate properly. Failure to do so
could result in serious personal injury in an accident. Seat belt assemblies not in use during a colli-
sion should also be replaced if either damage or improper operation is noted. Seat belt pre-tensioner
should be replaced even if the seat belts are not in use during a frontal collision in which the air bags
are deployed.
Replace any seat belt assembly (including anchor bolts) if:
2011 Pathfinder
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст