Nissan Pathfinder (2011 year). Instruction — part 37
AV
DISPLAY UNIT
AV-115
< REMOVAL AND INSTALLATION >
[MID AUDIO]
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
DISPLAY UNIT
Removal and Installation
INFOID:0000000006246523
REMOVAL
1. Remove cluster lid C. Refer to
IP-15, "Removal and Installation"
2. Remove the display unit screws (A).
3. Pull out the display unit (1), then disconnect the display unit con-
nectors and remove the display unit (1).
4. Remove the A/C auto amp. screws (A), remove the (C103) fas-
teners (B) from the display unit assembly brackets and remove
the A/C auto amp. (1).
5. Remove the display unit bracket unit screws (C) and remove the
display unit brackets (2).
INSTALLATION
Installation is in reverse order of removal.
ALNIA0358ZZ
ALNIA0359ZZ
2011 Pathfinder
AV-116
< REMOVAL AND INSTALLATION >
[MID AUDIO]
FRONT TWEETER
FRONT TWEETER
Removal and Installation
INFOID:0000000006246524
REMOVAL
CAUTION:
Use a suitable tool to prevent damage to the front tweeter speaker grille trim and the instrument panel.
1. Remove the front tweeter grille, using a suitable tool.
2. Remove the front tweeter screws (A).
3. Pull out the front tweeter speaker (1) and disconnect front
tweeter connector, then remove the front tweeter speaker (1).
INSTALLATION
Installation is in the reverse order of removal.
ALNIA0344ZZ
2011 Pathfinder
AV
FRONT DOOR SPEAKER
AV-117
< REMOVAL AND INSTALLATION >
[MID AUDIO]
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
FRONT DOOR SPEAKER
Removal and Installation
INFOID:0000000006246525
REMOVAL
1. Remove the front door finisher. Refer to
INT-15, "Removal and Installation"
2. Remove the front door speaker screws (A).
3. Pull out the front door speaker (1), and disconnect the front door
speaker connector and remove the front door speaker (1).
INSTALLATION
Installation is in the reverse order of removal.
ALNIA0347ZZ
2011 Pathfinder
AV-118
< REMOVAL AND INSTALLATION >
[MID AUDIO]
REAR DOOR SPEAKER
REAR DOOR SPEAKER
Removal and Installation
INFOID:0000000006246526
REMOVAL
1. Remove the rear door finisher. Refer to
INT-15, "Removal and Installation"
.
2. Remove the rear door speaker screws (A).
3. Disconnect the rear door speaker connector (B) and remove
rear door speaker (1).
INSTALLATION
Installation is in the reverse order of removal.
ALNIA0348ZZ
2011 Pathfinder
AV
STEERING SWITCH
AV-119
< REMOVAL AND INSTALLATION >
[MID AUDIO]
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
STEERING SWITCH
Removal and Installation
INFOID:0000000006246527
REMOVAL
1. Remove the driver air bag module. Refer to
SR-5, "Removal and Installation"
2. Remove the steering wheel audio control switch assembly screws.
3. Disconnect the steering wheel audio control switches connector.
4. Remove the steering wheel audio control switches by pulling on
steering wheel audio control switches to release the pawls.
•
: Pawl
CAUTION:
Do not tilt steering wheel audio control switches during
removal or damage may occur to the pawls.
INSTALLATION
Installation is in the reverse order of removal.
1. Steering wheel
2.
Steering wheel audio control switches
ALNIA0357ZZ
ALNIA1214ZZ
2011 Pathfinder
AV-120
< REMOVAL AND INSTALLATION >
[MID AUDIO]
AUDIO ANTENNA
AUDIO ANTENNA
Location of Antenna
INFOID:0000000006246530
Window Antenna Repair
INFOID:0000000006246531
ELEMENT CHECK
1. Attach probe circuit tester (ohm setting) to antenna terminal on
each side.
1.
AV control unit M132
2.
Harness connector
M78, M501
3.
Harness connector
M502, M601
4.
Antenna feeder
5.
Antenna amp.
M602
6.
Window antenna grid
AWNIA1775ZZ
SEL250I
2011 Pathfinder
AV
AUDIO ANTENNA
AV-121
< REMOVAL AND INSTALLATION >
[MID AUDIO]
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
•
When measuring continuity, wrap tin foil around the top of
probe. Then, press the foil against the wire with your fin-
ger.
2. If an element is broken, no continuity will exist.
3. To locate a break, move probe along element. Tester indication
will change abruptly when probe passes the broken point.
ELEMENT REPAIR
SEL122R
SEL252I
SEL253I
2011 Pathfinder
AV-122
< REMOVAL AND INSTALLATION >
[MID AUDIO]
AUXILIARY INPUT JACK
AUXILIARY INPUT JACK
Removal and Installation
INFOID:0000000006246532
Removal
1. Remove the A/T finisher. Refer to
IP-20, "Removal and Installation"
2. Remove the auxiliary input jack.
Installation
Installation is in the reverse order of removal.
2011 Pathfinder
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст