Nissan Pathfinder (2011 year). Instruction — part 508
POWER WINDOW MOTOR
PWC-23
< DTC/CIRCUIT DIAGNOSIS >
C
D
E
F
G
H
I
J
L
M
A
B
PWC
N
O
P
4. Check continuity between main power window and door lock/unlock switch connector (A) and ground.
Is the inspection result normal?
YES
>> Replace main power window and door lock/unlock switch. Refer to
.
NO
>> Repair or replace harness.
3.
CHECK POWER WINDOW MOTOR
Check front power window motor LH.
PWC-23, "DRIVER SIDE : Component Inspection"
.
Is the inspection result normal?
YES
>> Check intermittent incident. Refer to
GI-37, "Intermittent Incident"
.
NO
>> Replace power window motor LH. Refer to
GW-19, "Rear Door Glass Regulator"
.
DRIVER SIDE : Component Inspection
INFOID:0000000006243474
COMPONENT INSPECTION
1.
CHECK FRONT POWER WINDOW MOTOR LH
Check motor operation by connecting the battery voltage directly to power window motor.
Is the inspection result normal?
YES
>> Front power window motor LH is OK.
NO
>> Replace front power window motor LH. Refer to
GW-15, "Front Door Glass Regulator"
PASSENGER SIDE
PASSENGER SIDE : Description
INFOID:0000000006243475
Door glass moves UP/DOWN by receiving the signal from main power window and door lock/unlock switch or
power window and door lock/unlock switch RH.
PASSENGER SIDE : Component Function Check
INFOID:0000000006243476
1.
CHECK POWER WINDOW MOTOR CIRCIUT
Check power window motor operation with operating main power window and door lock/unlock switch or
power window and door lock/unlock switch RH.
Is the inspection result normal?
YES
>> Front power window motor RH is OK.
NO
>> Refer to
PWC-23, "PASSENGER SIDE : Diagnosis Procedure"
.
PASSENGER SIDE : Diagnosis Procedure
INFOID:0000000006243477
Regarding Wiring Diagram information, refer to
.
1.
CHECK POWER WINDOW AND DOOR LOCK/UNLOCK SWITCH RH OUTPUT SIGNAL
Main power window and door
lock/unlock switch connector
Terminal
Ground
Continuity
D7 (A)
8
No
11
Terminal
Motor condition
(+)
(–)
1
2
DOWN
2
1
UP
2011 Pathfinder
PWC-24
< DTC/CIRCUIT DIAGNOSIS >
POWER WINDOW MOTOR
1. Disconnect front power window motor RH.
2. Turn ignition switch ON.
3. Check voltage between front power window motor RH connector
and ground.
Is the measurement value within the specification?
YES
>> GO TO 3
NO
>> GO TO 2
2.
CHECK HARNESS CONTINUITY
1. Turn ignition switch OFF.
2. Disconnect power window and door lock/unlock switch RH.
3. Check continuity between power window and door lock/unlock
switch RH connector (A) and front power window motor RH con-
nector (B).
4. Check continuity between power window and door lock/unlock switch RH connector (A) and ground.
Is the inspection result normal?
YES
>> Replace power window and door lock/unlock switch RH. Refer to
PWC-86, "Removal and Installa-
.
NO
>> Repair or replace harness.
3.
CHECK FRONT POWER WINDOW MOTOR RH
Check front power window motor RH.
PWC-24, "PASSENGER SIDE : Component Inspection"
.
Is the inspection result normal?
YES
>> Check intermittent incident. Refer to
GI-37, "Intermittent Incident"
.
NO
>> Replace front power window motor RH. Refer to
GW-15, "Front Door Glass Regulator"
.
PASSENGER SIDE : Component Inspection
INFOID:0000000006243478
COMPONENT INSPECTION
1.
CHECK FRONT POWER WINDOW MOTOR RH
Check motor operation by connecting the battery voltage directly to front power window motor RH.
Terminal
Front power
window motor
RH condition
Voltage (V)
(Approx.)
(+)
(–)
Front power window
motor RH connector
Terminal
D104
2
Ground
UP
Battery voltage
DOWN
0
1
UP
0
DOWN
Battery voltage
ALKIA1207ZZ
Power window and
door lock/unlock
switch RH connector
Terminal
Front power window
motor RH connector
Terminal
Continuity
D105 (A)
8
D104 (B)
2
Yes
9
1
Power window and door
lock/unlock switch RH con-
nector
Terminal
Ground
Continuity
D105 (A)
8
No
9
ALKIA1711ZZ
2011 Pathfinder
POWER WINDOW MOTOR
PWC-25
< DTC/CIRCUIT DIAGNOSIS >
C
D
E
F
G
H
I
J
L
M
A
B
PWC
N
O
P
Is the inspection result normal?
YES
>> Front power window motor RH is OK.
NO
>> Replace front power window motor RH. Refer to
GW-15, "Front Door Glass Regulator"
.
REAR LH
REAR LH : Description
INFOID:0000000006243479
Door glass moves UP/DOWN by receiving the signal from power window main switch or rear power window
switch LH.
REAR LH : Component Function Check
INFOID:0000000006243480
1.
CHECK REAR POWER WINDOW MOTOR LH CIRCUIT
Check rear power window motor LH operation with main power window and door lock/unlock switch or rear
power window switch LH.
Is the inspection result normal?
YES
>> Rear power window motor LH is OK.
NO
>> Refer to
PWC-25, "REAR LH : Diagnosis Procedure"
REAR LH : Diagnosis Procedure
INFOID:0000000006243481
Regarding Wiring Diagram information, refer to
.
1.
CHECK REAR POWER WINDOW SWITCH OUTPUT SIGNAL
1. Disconnect rear power window motor LH.
2. Turn ignition switch ON.
3. Check voltage between rear power window motor LH connector
and ground.
Is the measurement value within the specification?
YES
>> GO TO 3
NO
>> GO TO 2
2.
CHECK HARNESS CONTINUITY
Terminal
Motor condition
(+)
(–)
1
2
DOWN
2
1
UP
Terminal
Window
condition
Voltage (V)
(Approx.)
(+)
(–)
Rear power window
motor LH connector
Terminal
D204
1
Ground
UP
0
DOWN
Battery voltage
2
UP
Battery voltage
DOWN
0
LIIA2228E
2011 Pathfinder
PWC-26
< DTC/CIRCUIT DIAGNOSIS >
POWER WINDOW MOTOR
1. Turn ignition switch OFF.
2. Disconnect rear power window switch LH.
3. Check continuity between rear power window switch LH connec-
tor (A) and rear power window motor LH connector (B).
4. Check continuity between rear power window switch LH connec-
tor (A) and ground.
Is the inspection result normal?
YES
>> Check rear power window switch LH. Refer to
PWC-19, "REAR POWER WINDOW SWITCH :
.
NO
>> Repair or replace harness.
3.
CHECK REAR POWER WINDOW MOTOR LH
Check rear power window motor LH.
PWC-26, "REAR LH : Component Inspection"
Is the inspection result normal?
YES
>> Check intermittent incident. Refer to
GI-37, "Intermittent Incident"
.
NO
>> Replace rear power window motor LH. Refer to
GW-19, "Rear Door Glass Regulator"
REAR LH : Component Inspection
INFOID:0000000006243482
COMPONENT INSPECTION
1.
CHECK REAR POWER WINDOW MOTOR LH
Check motor operation by connecting the battery voltage directly to rear power window motor LH.
Is the inspection result normal?
YES
>> Rear power window motor LH is OK.
NO
>> Replace rear power window motor LH. Refer to
GW-19, "Rear Door Glass Regulator"
REAR RH
REAR RH : Description
INFOID:0000000006243483
Door glass moves UP/DOWN by receiving the signal from main power window and door lock/unlock switch or
rear power window switch RH.
REAR RH : Component Function Check
INFOID:0000000006243484
1.
CHECK REAR POWER WINDOW MOTOR RH CIRCUIT
Check rear power window motor RH operation with operating main power window and door lock/unlock switch
or rear power window switch RH.
Rear power window
switch LH connector
Terminal
Rear power window
motor LH connector
Terminal
Continuity
D203 (A)
6
D204 (B)
1
Yes
7
2
Rear power window switch
LH connector
Terminal
Ground
Continuity
D203 (A)
6
No
7
LIIA2229E
Terminal
Motor condition
(+)
(–)
2
1
UP
1
2
DOWN
2011 Pathfinder
POWER WINDOW MOTOR
PWC-27
< DTC/CIRCUIT DIAGNOSIS >
C
D
E
F
G
H
I
J
L
M
A
B
PWC
N
O
P
Is the inspection result normal?
YES
>> Rear power window motor RH is OK.
NO
>> Refer to
PWC-27, "REAR RH : Diagnosis Procedure"
.
REAR RH : Diagnosis Procedure
INFOID:0000000006243485
Regarding Wiring Diagram information, refer to
.
1.
CHECK REAR POWER WINDOW SWITCH RH OUTPUT SIGNAL
1. Disconnect rear power window motor RH.
2. Turn ignition switch ON.
3. Check voltage between rear power window motor RH connector
and ground.
Is the measurement value within the specification?
YES
>> GO TO 3
NO
>> GO TO 2
2.
CHECK HARNESS CONTINUITY
1. Turn ignition switch OFF.
2. Disconnect rear power window switch RH.
3. Check continuity between rear power window switch RH con-
nector (A) and rear power window motor RH connector (B).
4. Check continuity between rear power window switch RH con-
nector (A) and ground.
Is the inspection result normal?
YES
>> Check rear power window switch RH. Refer to
PWC-19, "REAR POWER WINDOW SWITCH :
.
NO
>> Repair or replace harness.
3.
CHECK REAR POWER WINDOW MOTOR RH
Check rear power window motor RH.
PWC-28, "REAR RH : Component Inspection"
.
Terminal
Rear power
window switch
RH condition
Voltage (V)
(Approx.)
(+)
(–)
Rear power window
motor RH connector
Terminal
D304
1
Ground
UP
0
DOWN
Battery voltage
2
UP
Battery voltage
DOWN
0
LIIA2228E
Rear power window
switch RH connector
Terminal
Rear power window
motor RH connector
Terminal
Continuity
D303 (A)
6
D304 (B)
1
Yes
7
2
Rear power window switch
RH connector
Terminal
Ground
Continuity
D303 (A)
6
No
7
LIIA2229E
2011 Pathfinder
PWC-28
< DTC/CIRCUIT DIAGNOSIS >
POWER WINDOW MOTOR
Is the inspection result normal?
YES
>> Check intermittent incident. Refer to
GI-37, "Intermittent Incident"
.
NO
>> Replace rear power window motor RH. Refer to
GW-19, "Rear Door Glass Regulator"
.
REAR RH : Component Inspection
INFOID:0000000006243486
COMPONENT INSPECTION
1.
CHECK REAR POWER WINDOW MOTOR RH
Check motor operation by connecting the battery voltage directly to rear power window motor RH.
Is the inspection result normal?
YES
>> Rear power window motor RH is OK.
NO
>> Replace rear power window motor RH. Refer to
GW-19, "Rear Door Glass Regulator"
.
Terminal
Motor condition
(+)
(–)
2
1
UP
1
2
DOWN
2011 Pathfinder
ENCODER
PWC-29
< DTC/CIRCUIT DIAGNOSIS >
C
D
E
F
G
H
I
J
L
M
A
B
PWC
N
O
P
ENCODER
DRIVER SIDE
DRIVER SIDE : Description
INFOID:0000000006243487
Detects condition of the front power window motor LH operation and transmits to main power window and door
lock/unlock switch as pulse signal.
DRIVER SIDE : Component Function Check
INFOID:0000000006243488
1.
CHECK ENCODER OPERATION
Check front door glass LH perform AUTO open/close operation normally when operating main power window
and door lock/unlock switch.
Is the inspection result normal?
YES
>> Encoder operation is OK.
NO
>> Refer to
PWC-29, "DRIVER SIDE : Diagnosis Procedure"
DRIVER SIDE : Diagnosis Procedure
INFOID:0000000006243489
Regarding Wiring Diagram information, refer to
.
1.
CHECK ENCODER OPERATION
1. Turn ignition switch ON.
2. Check signal between main power window and door lock/unlock
switch connector and ground with oscilloscope.
Is the inspection result normal?
YES
>> Check intermittent incident. Refer to
GI-37, "Intermittent Incident"
.
NO
>> GO TO 2
2.
CHECK FRONT POWER WINDOW MOTOR LH POWER SUPPLY
Terminals
Signal
(Reference value)
(+)
(–)
Main power window
and door lock/unlock
switch connector
Terminal
D7
9
Ground
Refer to following signal
13
ALKIA0295ZZ
JMKIA0220GB
2011 Pathfinder
PWC-30
< DTC/CIRCUIT DIAGNOSIS >
ENCODER
1. Turn ignition switch ON.
2. Check voltage between front power window motor LH connector
and ground.
Is the measurement value within the specification?
YES
>> GO TO 4
NO
>> GO TO 3
3.
CHECK HARNESS CONTINUITY 1
1. Turn ignition switch OFF.
2. Disconnect main power window and door lock/unlock switch and
front power window motor LH.
3. Check continuity between main power window and door lock/
unlock switch connector (A) and front power window motor LH
connector (B).
4. Check continuity between main power window and door lock/unlock switch connector (A) and ground.
Is the inspection result normal?
YES
>> Replace main power window and door lock/unlock switch. Refer to
.
NO
>> Repair or replace harness.
4.
CHECK GROUND CIRCUIT
1. Turn ignition switch OFF.
2. Disconnect front power window motor LH.
3. Check continuity between front power window motor LH connec-
tor and ground.
Is the inspection result normal?
YES
>> GO TO 6
NO
>> GO TO 5
5.
CHECK HARNESS CONTINUITY 2
Terminal
Voltage (V)
(Approx.)
(+)
(–)
Front power win-
dow motor LH con-
nector
Terminal
D9
3
Ground
10
LIIA2782E
Main power window
and door lock/unlock
switch connector
Terminal
Front power window
motor LH connector
Terminal
Continuity
D7 (A)
15
D9 (B)
3
Yes
Main power window and door
lock/unlock switch connector
Terminal
Ground
Continuity
D7 (A)
15
No
ALKIA1208ZZ
Front power window motor
LH connector
Terminal
Ground
Continuity
D9
4
Yes
LIIA2776E
2011 Pathfinder
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст