Nissan Pathfinder (2011 year). Instruction — part 31
AV
POWER SUPPLY AND GROUND CIRCUIT
AV-67
< DTC/CIRCUIT DIAGNOSIS >
[MID AUDIO]
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
1. Turn ignition switch OFF.
2. Check continuity between A/C and AV switch assembly harness
connector M98 and ground.
Are the continuity results as specified?
YES
>> Inspection End.
NO
>> Repair harness or ground.
REAR VIEW CAMERA
REAR VIEW CAMERA : Diagnosis Procedure
INFOID:0000000006709593
Regarding Wiring Diagram information, refer to
1.
CHECK POWER SUPPLY CIRCUIT (REAR VIEW CAMERA SIDE)
NOTE:
Apply parking brakes before proceeding.
1. Turn ignition switch ON.
2. Shift transmission into reverse.
3. Check voltage between rear view camera harness connector D551 terminal 2 and ground.
Is voltage reading approximately 12 volts?
YES
>> GO TO 4.
NO
>> GO TO 2.
2.
CHECK POWER SUPPLY CIRCUIT (CONTINUITY)
1. Turn ignition switch OFF.
2. Disconnect rear view camera and AV control unit connectors.
3. Check continuity between rear view camera harness connector D551 terminal 2 and AV control unit har-
ness connector M134 terminal 105.
4. Check continuity between rear view camera harness connector D551 terminal 2 and ground.
Are continuity test results as specified?
YES
>> GO TO 3.
NO
>> Repair harness or connector.
3.
CHECK REVERSE POSITION INPUT SIGNAL
1. Turn ignition switch ON.
2. Shift transmission into reverse.
3. Check voltage between AV control unit harness connector M134 terminal 105 and ground.
Connector
Terminal
—
Continuity
M98
1
Ground
Yes
ALNIA0316GB
(+)
(-)
Transmission
position
Value (Approx.)
Connector
Terminal
D551
2
Ground
Reverse
12V
Connector
Terminal
Connector
Terminal
Continuity
D551
2
M134
105
Yes
Connector
Terminal
—
Continuity
D551
2
Ground
No
2011 Pathfinder
AV-68
< DTC/CIRCUIT DIAGNOSIS >
[MID AUDIO]
POWER SUPPLY AND GROUND CIRCUIT
Is voltage reading approximately 12 volts?
YES
>> Replace AV control unit. Refer to
AV-113, "Removal and Installation"
NO
>> Check harness for open or short between AV control unit and back-up lamp relay.
4.
CHECK GROUND CIRCUIT
1. Turn ignition switch OFF.
2. Disconnect rear view camera harness connector.
3. Check continuity between rear view camera harness connector D551 terminal 1 and ground.
Does continuity exist?
YES
>> Inspection End.
NO
>> Repair harness or connector.
(+)
(-)
Transmission
position
Value (Approx.)
Connector
Terminal
M134
105
Ground
Reverse
12V
Connector
Terminal
—
Continuity
D551
1
Ground
Yes
2011 Pathfinder
AV
RGB (R: RED) SIGNAL CIRCUIT
AV-69
< DTC/CIRCUIT DIAGNOSIS >
[MID AUDIO]
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
RGB (R: RED) SIGNAL CIRCUIT
Description
INFOID:0000000006246484
Transmit the image displayed with AV control unit with RGB signal to the display unit.
Diagnosis Procedure
INFOID:0000000006246485
Regarding Wiring Diagram information, refer to
1.
CHECK CONTINUITY RGB (R: RED) SIGNAL CIRCUIT
1. Turn ignition switch OFF.
2. Disconnect display unit connector M93 and AV control unit con-
nector M133.
3. Check continuity between display unit harness connector M93
(A) terminal 17 and AV control unit harness connector M133 (B)
terminal 40.
4. Check continuity between display unit harness connector M93
(A) terminal 17 and ground.
Are the continuity results as specified?
YES
>> GO TO 2
NO
>> Repair harness or connector.
2.
CHECK RGB (R: RED) SIGNAL
1. Connect display unit connector M93 and AV control unit connec-
tor M133.
2. Turn ignition switch ON.
3. Check signal between display unit harness connector M93 ter-
minal 17 and ground.
Are the voltage readings as specified?
YES
>> Replace display unit. Refer to
AV-115, "Removal and Installation"
.
NO
>> Replace AV control unit. Refer to
AV-113, "Removal and Installation"
A
B
Continuity
Connector
Terminal
Connector
Terminal
M93
17
M133
40
Yes
A
—
Continuity
Connector
Terminal
M93
17
Ground
No
ALNIA0382GB
(+)
(-)
Condition
Reference signal
Connector
Terminal
M93
17
Ground
Receive
audio sig-
nal
ALNIA0383GB
SKIB2238J
2011 Pathfinder
AV-70
< DTC/CIRCUIT DIAGNOSIS >
[MID AUDIO]
RGB (G: GREEN) SIGNAL CIRCUIT
RGB (G: GREEN) SIGNAL CIRCUIT
Description
INFOID:0000000006246486
Transmit the image displayed with AV control unit with RGB signal to the display unit.
Diagnosis Procedure
INFOID:0000000006246487
Regarding Wiring Diagram information, refer to
1.
CHECK CONTINUITY RGB (G: GREEN) SIGNAL CIRCUIT
1. Turn ignition switch OFF.
2. Disconnect display unit connector M93 and AV control unit con-
nector M133.
3. Check continuity between display unit harness connector M93
(A) terminal 6 and AV control unit harness connector M133 (B)
terminal 39.
4. Check continuity between display unit harness connector M93
(A) terminal 6 and ground.
Are the continuity results as specified?
YES
>> GO TO 2
NO
>> Repair harness or connector.
2.
CHECK RGB (G: GREEN) SIGNAL
1. Connect display unit connector M93 and AV control unit connec-
tor M133.
2. Turn ignition switch ON.
3. Check signal between display unit harness connector M93 ter-
minal 6 and ground.
Are voltage readings as specified?
YES
>> Replace display unit. Refer to
AV-115, "Removal and Installation"
.
NO
>> Replace AV control unit. Refer to
AV-113, "Removal and Installation"
A
B
Continuity
Connector
Terminal
Connector
Terminal
M93
6
M133
39
Yes
A
—
Continuity
Connector
Terminal
M93
6
Ground
No
ALNIA0384GB
(+)
(-)
Condition
Reference signal
Connector
Terminal
M93
6
Ground
Receive
audio sig-
nal
ALNIA0385GB
SKIB2236J
2011 Pathfinder
AV
RGB (B: BLUE) SIGNAL CIRCUIT
AV-71
< DTC/CIRCUIT DIAGNOSIS >
[MID AUDIO]
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
RGB (B: BLUE) SIGNAL CIRCUIT
Description
INFOID:0000000006246488
Transmit the image displayed with AV control unit with RGB signal to the display unit.
Diagnosis Procedure
INFOID:0000000006246489
Regarding Wiring Diagram information, refer to
1.
CHECK CONTINUITY RGB (B: BLUE) SIGNAL CIRCUIT
1. Turn ignition switch OFF.
2. Disconnect display unit connector M93 and AV control unit con-
nector M133.
3. Check continuity between display unit harness connector M93
(A) terminal 18 and AV control unit harness connector M133 (B)
terminal 38.
4. Check continuity between display unit harness connector M93
(A) terminal 18 and ground.
Are continuity results as specified?
YES
>> GO TO 2
NO
>> Repair harness or connector.
2.
CHECK RGB (B: BLUE) SIGNAL
1. Connect display unit connector M93 and AV control unit connec-
tor M133.
2. Turn ignition switch ON.
3. Check signal between display unit harness connector M93 ter-
minal 18 and ground.
Are voltage readings as specified?
YES
>> Replace display unit. Refer to
AV-115, "Removal and Installation"
.
NO
>> Replace AV control unit. Refer to
AV-113, "Removal and Installation"
A
B
Continuity
Connector
Terminal
Connector
Terminal
M93
18
M133
38
Yes
A
—
Continuity
Connector
Terminal
M93
18
Ground
No
ALNIA0386GB
(+)
(-)
Condition
Reference signal
Connector
Terminal
M93
18
Ground
Receive
audio sig-
nal
ALNIA0387GB
SKIB2237J
2011 Pathfinder
AV-72
< DTC/CIRCUIT DIAGNOSIS >
[MID AUDIO]
RGB SYNCHRONIZING SIGNAL CIRCUIT
RGB SYNCHRONIZING SIGNAL CIRCUIT
Description
INFOID:0000000006246490
Transmit the RGB synchronizing signal to the display unit so as to synchronize the RGB image displayed with
AV control unit.
Diagnosis Procedure
INFOID:0000000006246491
Regarding Wiring Diagram information, refer to
1.
CHECK CONTINUITY RGB SYNCHRONIZING SIGNAL CIRCUIT
1. Turn ignition switch OFF.
2. Disconnect display unit connector M93 and AV control unit con-
nector M133.
3. Check continuity between display unit harness connector M93
(A) terminal 19 and AV control unit harness connector M133 (B)
terminal 41.
4. Check continuity between display unit harness connector M93
(A) terminal 19 and ground.
Are continuity results as specified?
YES
>> GO TO 2
NO
>> Repair harness or connector.
2.
CHECK RGB SYNCHRONIZING SIGNAL
1. Connect display unit connector M93 and AV control unit connec-
tor M133.
2. Turn ignition switch ON.
3. Check signal between display unit harness connector M93 ter-
minal 19 and ground.
Are voltage readings as specified?
YES
>> Replace display unit. Refer to
AV-115, "Removal and Installation"
.
NO
>> Replace AV control unit. Refer to
AV-113, "Removal and Installation"
A
B
Continuity
Connector
Terminal
Connector
Terminal
M93
19
M133
41
Yes
A
—
Continuity
Connector
Terminal
M93
19
Ground
No
ALNIA0388GB
(+)
(-)
Condition
Reference signal
Connector
Terminal
M93
19
Ground
Receive
audio sig-
nal
ALNIA0389GB
SKIB3603E
2011 Pathfinder
AV
RGB AREA (YS) SIGNAL CIRCUIT
AV-73
< DTC/CIRCUIT DIAGNOSIS >
[MID AUDIO]
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
RGB AREA (YS) SIGNAL CIRCUIT
Description
INFOID:0000000006246492
Transmits the display area of RGB image displayed by AV control unit with RGB area (YS) signal to display
unit.
Diagnosis Procedure
INFOID:0000000006246493
Regarding Wiring Diagram information, refer to
1.
CHECK CONTINUITY RGB AREA (YS) SIGNAL CIRCUIT
1. Turn ignition switch OFF.
2. Disconnect display unit connector M93 and AV control unit con-
nector M133.
3. Check continuity between display unit harness connector M93
(A) terminal 9 and AV control unit harness connector M133 (B)
terminal 43.
4. Check continuity between display unit harness connector M93
(A) terminal 9 and ground.
Are continuity results as specified?
YES
>> GO TO 2
NO
>> Repair harness or connector.
2.
CHECK RGB SYNCHRONIZING SIGNAL
1. Connect display unit connector M93 and AV control unit connec-
tor M133.
2. Turn ignition switch ON.
3. Check signal between display unit harness connector M93 ter-
minal 9 and ground.
Are voltage readings as specified?
YES
>> Replace display unit. Refer to
AV-115, "Removal and Installation"
.
NO
>> Replace AV control unit. Refer to
AV-113, "Removal and Installation"
A
B
Continuity
Connector
Terminal
Connector
Terminal
M93
9
M133
43
Yes
A
—
Continuity
Connector
Terminal
M93
9
Ground
No
ALNIA0390GB
(+)
(-)
Condition
Reference signal
Connector
Terminal
M93
9
Ground
Receive
audio sig-
nal
ALNIA0391GB
PKIB4948J
2011 Pathfinder
AV-74
< DTC/CIRCUIT DIAGNOSIS >
[MID AUDIO]
HORIZONTAL SYNCHRONIZING (HP) SIGNAL CIRCUIT
HORIZONTAL SYNCHRONIZING (HP) SIGNAL CIRCUIT
Description
INFOID:0000000006246494
In composite image (AUX image, camera image), transmit the vertical synchronizing (VP) signal and horizon-
tal synchronizing (HP) signal from display unit to AV control unit so as to synchronize the RGB images dis-
played with AV control unit such as the image quality adjusting menu, etc.
Diagnosis Procedure
INFOID:0000000006246495
Regarding Wiring Diagram information, refer to
1.
CHECK CONTINUITY HORIZONTAL SYNCHRONIZING (HP) SIGNAL CIRCUIT
1. Turn ignition switch OFF.
2. Disconnect display unit connector M93 and AV control unit con-
nector M133.
3. Check continuity between display unit harness connector M93
(A) terminal 8 and AV control unit harness connector M133 (B)
terminal 45.
4. Check continuity between display unit harness connector M93
(A) terminal 8 and ground.
Are continuity results as specified?
YES
>> GO TO 2
NO
>> Repair harness or connector.
2.
CHECK HORIZONTAL SYNCHRONIZING (HP) SIGNAL
1. Connect display unit connector M93 and AV control unit connec-
tor M133.
2. Turn ignition switch ON.
3. Check signal between display unit harness connector M93 ter-
minal 8 and ground.
Are voltage readings as specified?
YES
>> Replace AV control unit. Refer to
AV-113, "Removal and Installation"
NO
>> Replace display unit. Refer to
AV-115, "Removal and Installation"
.
A
B
Continuity
Connector
Terminal
Connector
Terminal
M93
8
M133
45
Yes
A
—
Continuity
Connector
Terminal
M93
8
Ground
No
ALNIA0394GB
(+)
(-)
Condition
Reference signal
Connector
Terminal
M93
8
Ground
Receive
audio sig-
nal
ALNIA0396GB
SKIB3601E
2011 Pathfinder
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст