Nissan Pathfinder (2011 year). Instruction — part 182
DLK-322
< REMOVAL AND INSTALLATION >
[WITHOUT INTELLIGENT KEY SYSTEM]
DOOR
REAR DOOR
1. Remove the door finisher. Refer to
INT-15, "Removal and Installation"
.
2. Remove the inner seal.
3. Remove the rear door speaker. Refer to
AV-37, "Removal and Installation"
(premium audio).
4. Remove the rear door tweeter, premium audio only.
AV-425, "Removal and Installation"
5. Remove the rear door glass and regulator. Refer to
GW-19, "Rear Door Glass Regulator"
.
6. Remove the door harness.
7. Remove the check link bolt from the hinge pillar.
8. Remove the door-side hinge nuts, and remove the door assembly.
Installation is in the reverse order of removal.
BACK DOOR
1. Remove the glass hatch. Refer to
GW-24, "Removal and Installation"
.
2. Remove the license lamp finisher. Refer to
EXT-23, "Removal and Installation"
.
3. Remove the back door lock assembly. Refer to
DLK-328, "Component Structure"
4. Remove the back door wire harness.
5. Remove the rear wiper motor. Refer to
WW-75, "Removal and Installation"
6. Remove the rear washer nozzle and hose from the back door. Refer to
7. Remove the high mounted stop light. Refer to
EXL-151, "High-Mounted Stop Lamp"
.
8. Support the back door.
9. Remove the back door stays.
10. Remove the door side nuts and the back door assembly.
CAUTION:
Check link to hinge pillar
bolt
14.7 N·m (1.5 kg-m, 11 ft-lb)
LIIA1726E
Door hinge nuts
25.8 N·m (2.6 kg-m, 19 ft-lb)
LIIA1727E
2011 Pathfinder
DOOR
DLK-323
< REMOVAL AND INSTALLATION >
[WITHOUT INTELLIGENT KEY SYSTEM]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
Two technicians should be used to avoid damaging the back door during removal.
Installation is in the reverse order of removal.
• Align the back door. Refer to
Back Door Stay Disposal
INFOID:0000000006832814
1. Fix back door stay (1) using a vise (C).
2. Using hacksaw (A) slowly make 2 holes in the back door stay, in
numerical order as shown in the figure.
CAUTION:
• When cutting a hole on back door stay, always cover a
hacksaw using a shop cloth (B) to avoid scattering metal
fragments or oil.
• Wear eye protection (safety glasses).
• Wear gloves.
WIIA1056E
JMKIA3336ZZ
A: 20 mm (0.787 in)
B: Cut at the groove.
JMKIA3609ZZ
2011 Pathfinder
DLK-324
< REMOVAL AND INSTALLATION >
[WITHOUT INTELLIGENT KEY SYSTEM]
FRONT DOOR LOCK
FRONT DOOR LOCK
Component Structure
INFOID:0000000006245687
Removal and Installation
INFOID:0000000006245688
REMOVAL
1. Remove the front door window regulator. Refer to
GW-15, "Front Door Glass Regulator"
2. Remove door side grommet, and remove door key cylinder
assembly (driver side) or outside handle escutcheon (passenger
side) bolts (TORX T30) from grommet hole.
3. While pulling the outside handle (1), remove door key cylinder
assembly or escutcheon (2).
1.
Grommet
2.
Front door striker
3.
Door lock assembly
4.
Outside handle cable
5.
Inside handle assembly
6.
Inside handle cable
7.
Door lock cable
8.
Key cylinder rod (Driver side only)
9.
Door key cylinder
10. Outside handle bracket
11. Front gasket
12. Outside handle
13. Door key cylinder assembly (Driver
side) Outside handle escutcheon
(Passenger side)
14. Rear gasket
Vehicle front
AWKIA1793GB
PIIA3553E
ALKIA0956ZZ
2011 Pathfinder
FRONT DOOR LOCK
DLK-325
< REMOVAL AND INSTALLATION >
[WITHOUT INTELLIGENT KEY SYSTEM]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
4. Separate the door key cylinder rod from the door key cylinder assembly (if equipped).
5. While pulling outside handle, slide toward rear of vehicle to
remove outside handle.
6. Remove the front gasket (1) and rear gasket (2).
7. Remove the TORX bolts (T30), remove the door lock assembly.
8. While pulling outside handle bracket, slide toward rear of vehicle
to remove outside handle bracket and door lock assembly as
shown.
9. Disconnect the door lock actuator electrical connector.
ALKIA0957ZZ
ALKIA0924ZZ
PIIA1090E
PIIA3558E
2011 Pathfinder
DLK-326
< REMOVAL AND INSTALLATION >
[WITHOUT INTELLIGENT KEY SYSTEM]
FRONT DOOR LOCK
10. Separate the outside handle cable connection from the outside
handle bracket.
INSTALLATION
Installation is in the reverse order of removal.
CAUTION:
• To install the key cylinder rod, be sure to rotate the key cylinder rod holder until a click is felt.
• Do not twist the door lock cable when installing the front door lock.
Disassembly and Assembly
INFOID:0000000006245689
DOOR KEY CYLINDER ASSEMBLY
Release the key cylinder escutcheon pawls to remove the door key cylinder.
PIIA5059E
1.
Door key cylinder assembly
2.
Door key cylinder escutcheon
3.
Door key cylinder
Pawl
WIIA1057E
2011 Pathfinder
REAR DOOR LOCK
DLK-327
< REMOVAL AND INSTALLATION >
[WITHOUT INTELLIGENT KEY SYSTEM]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
REAR DOOR LOCK
Component Structure
INFOID:0000000006245690
Removal and Installation
INFOID:0000000006245691
REMOVAL
1. Remove the rear door finisher. Refer to
INT-15, "Removal and Installation"
.
2. Remove the inner seal.
3. Remove door grommets, and remove outside handle nuts from the hole.
4. Remove outside handle.
5. Disconnect the outside handle cable connection.
6. Remove the inside door handle.
7. Disconnect the door lock and inside door handle cables from the inside door handle.
8. Disconnect the door lock actuator connector and remove the assembly.
INSTALLATION
CAUTION:
Do not twist the outside door handle cable, inside door handle cable and door lock cable during instal-
lation.
Installation is in the reverse order of removal.
1.
Outside door handle
2.
Rear door striker
3.
Rear door lock assembly
4.
Outside door handle cable
5.
Inside door handle cable
6.
Inside door handle assembly
7.
Door lock cable
Vehicle front
AWKIA1794GB
2011 Pathfinder
DLK-328
< REMOVAL AND INSTALLATION >
[WITHOUT INTELLIGENT KEY SYSTEM]
BACK DOOR LOCK
BACK DOOR LOCK
Component Structure
INFOID:0000000006245692
1.
Glass hatch latch assembly
2.
Back door control assembly
3.
Back door striker
4.
Back door latch assembly
5.
Back door release button
6.
Back door finisher
7.
Glass hatch release handle
8.
Glass latch release cable
9.
Glass hatch release cable
Front
AWKIA1438GB
2011 Pathfinder
DLN-1
TRANSMISSION & DRIVELINE
C
E
F
G
H
I
J
K
L
M
SECTION
DLN
A
B
DLN
N
O
P
CONTENTS
DRIVELINE
TRANSFER: ATX14B
BASIC INSPECTION . . . . . . . . .
DIAGNOSIS AND REPAIR WORKFLOW . . ..
Work Flow . . . . . . . . . . . . . . . .....
Preliminary Check . . . . . . . . . . . . ...
SYSTEM DESCRIPTION . . . . . . . .
4WD SYSTEM . . . . . . . . . . . . .
System Diagram . . . . . . . . . . . . . ..
System Description . . . . . . . . . . . . .
Component Parts Location . . . . . . . . . ..
CAN Communication . . . . . . . . . . . ...
Cross-Sectional View . . . . . . . . . . . ..
Power Transfer . . . . . . . . . . . . . .
DIAGNOSIS SYSTEM (TRANSFER CON-
TROL UNIT) . . . . . . . . . . . . . .
CONSULT-III Function (ALL MODE AWD/4WD) .
NOISE, VIBRATION AND HARSHNESS
(NVH) TROUBLESHOOTING . . . . . . .
NVH Troubleshooting Chart . . . . . . . . .
DTC/CIRCUIT DIAGNOSIS . . . . . . .
P1811 POWER SUPPLY CIRCUIT FOR
TRANSFER CONTROL UNIT . . . . . . .
Description . . . . . . . . . . . . . . . ..
DTC Logic . . . . . . . . . . . . . . . ...
Diagnosis Procedure . . . . . . . . . . . ...
Component Inspection . . . . . . . . . . .
P1802 – P1804, P1809 TRANSFER CON-
TROL UNIT . . . . . . . . . . . . . . .
Description . . . . . . . . . . . . . . . ..
DTC Logic . . . . . . . . . . . . . . . ...
Diagnosis Procedure . . . . . . . . . . . ...
P1807 VEHICLE SPEED SENSOR (A/T) . . ..
Description . . . . . . . . . . . . . . . ...
DTC Logic . . . . . . . . . . . . . . . .
Diagnosis Procedure . . . . . . . . . . . ...
P1808 VEHICLE SPEED SENSOR (ABS) . ...
Description . . . . . . . . . . . . . . . ...
DTC Logic . . . . . . . . . . . . . . . .
Diagnosis Procedure . . . . . . . . . . . ...
P1810 NEUTRAL-4LO SWITCH . . . . . ...
Description . . . . . . . . . . . . . . . ...
DTC Logic . . . . . . . . . . . . . . . .
Diagnosis Procedure . . . . . . . . . . . ...
Component Inspection . . . . . . . . . . . .
P1813 4WD SHIFT SWITCH . . . . . . . .
Description . . . . . . . . . . . . . . . ...
DTC Logic . . . . . . . . . . . . . . . .
Diagnosis Procedure . . . . . . . . . . . ...
Component Inspection . . . . . . . . . . . .
P1814 WAIT DETECTION SWITCH . . . . .
Description . . . . . . . . . . . . . . . ...
DTC Logic . . . . . . . . . . . . . . . .
Diagnosis Procedure . . . . . . . . . . . ...
Component Inspection . . . . . . . . . . . .
P1816 PNP SWITCH . . . . . . . . . . .
Description . . . . . . . . . . . . . . . ...
DTC Logic . . . . . . . . . . . . . . . .
Diagnosis Procedure . . . . . . . . . . . ...
P1817 ACTUATOR MOTOR . . . . . . . .
Description . . . . . . . . . . . . . . . ...
DTC Logic . . . . . . . . . . . . . . . .
Diagnosis Procedure . . . . . . . . . . . ...
Component Inspection . . . . . . . . . . . .
P1818 ACTUATOR POSITION SWITCH . . ..
Description . . . . . . . . . . . . . . . ...
DTC Logic . . . . . . . . . . . . . . . .
Diagnosis Procedure . . . . . . . . . . . ...
2011 Pathfinder
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст