Nissan Pathfinder (2011 year). Instruction — part 552
VEHICLE SECURITY SYSTEM
SEC-123
< SYSTEM DESCRIPTION >
[WITHOUT INTELLIGENT KEY SYSTEM]
C
D
E
F
G
H
I
J
L
M
A
B
SEC
N
O
P
VEHICLE SECURITY SYSTEM
System Diagram
INFOID:0000000006246296
System Description
INFOID:0000000006246297
DESCRIPTION
The security system provides an audible and visual alarm when an unauthorized access to the vehicle is
detected while the system is in armed phase.
The security system consist of the BCM managing the audible alarm (horn) and the visual alarm (headlamps).
OPERATION FLOW
Disarmed Phase
When the vehicle is being driven or when doors are open, the theft warning system is set in the disarmed
phase on the assumption that the owner is inside or near the vehicle.
Pre-Armed Phase And Armed Phase
The vehicle security system turns into the pre-armed phase when ignition switch is in OFF position, all doors
including glass hatch are closed and locked (using keyfob, doorlock/unlock switch, driver key cylinder or auto
relock function). The system automatically shifts into the armed phase.
Condition of Activating The System
When the following condition is performed in armed phase, the system sounds the horns and flashes the
headlamps for about 50 seconds.
• Any door is opened.
ALKIA0706GB
PIIA1367E
2011 Pathfinder
SEC-124
< SYSTEM DESCRIPTION >
[WITHOUT INTELLIGENT KEY SYSTEM]
VEHICLE SECURITY SYSTEM
Condition of Deactivating The System
When one of the following operations is performed, the armed phase is canceled.
• Unlock the doors with keyfob.
• Use the mechanical key to unlock the driver door using the door key cylinder.
Component Parts Location
INFOID:0000000006246298
1.
BCM M18, M19, M20
(view with instrument panel LH re-
moved)
2.
IPDM E/R E122, E123, E124
(view with cover removed)
3.
Horn relay H-1
4.
Main power window and door lock/
unlock switch D7, D8
5.
Front door switch LH B8
RH B108
6.
Front door lock assembly LH (key cylin-
der switch) D14
7.
Power window and door lock/unlock
switch RH D105
8.
Rear door switch LH B18
RH B116
9.
Glass hatch ajar switch D503
10. Back door latch (door ajar switch)
D502
Glass hatch ajar switch D503
11. Horn E3
(behind front combination lamp LH)
12. Combination meter M24
13. Security indicator lamp
ALKIA1718ZZ
2011 Pathfinder
VEHICLE SECURITY SYSTEM
SEC-125
< SYSTEM DESCRIPTION >
[WITHOUT INTELLIGENT KEY SYSTEM]
C
D
E
F
G
H
I
J
L
M
A
B
SEC
N
O
P
Component Description
INFOID:0000000006246299
Item
Function
BCM
Verifies the received signal from ignition key, then informs ECM whether to allow engine start.
Door switch
Provides the BCM with the status of each monitored door.
Security indicator
Indicates the status of the security system.
IPDM E/R
Controls the horn and headlamps operation.
Horn
Sounds when the vehicle security system is triggered.
2011 Pathfinder
SEC-126
< SYSTEM DESCRIPTION >
[WITHOUT INTELLIGENT KEY SYSTEM]
DIAGNOSIS SYSTEM (BCM)
DIAGNOSIS SYSTEM (BCM)
COMMON ITEM
COMMON ITEM : CONSULT-III Function (BCM - COMMON ITEM)
INFOID:0000000006766976
APPLICATION ITEM
CONSULT-III performs the following functions via CAN communication with BCM.
SYSTEM APPLICATION
BCM can perform the following functions.
Direct Diagnostic Mode
Description
Ecu Identification
The BCM part number is displayed.
Self Diagnostic Result
The BCM self diagnostic results are displayed.
Data Monitor
The BCM input/output data is displayed in real time.
Active Test
The BCM activates outputs to test components.
Work support
The settings for BCM functions can be changed.
Configuration
• The vehicle specification can be read and saved.
• The vehicle specification can be written when replacing BCM.
CAN Diag Support Mntr
The result of transmit/receive diagnosis of CAN communication is displayed.
System
Sub System
Direct Diagnostic Mode
E
cu
Id
en
tifi
ca
tio
n
Se
lf Di
ag
no
st
ic Re
su
lt
Da
ta
Mo
ni
tor
A
cti
ve
T
est
W
o
rk support
Co
nf
igu
rat
ion
CA
N Diag
Su
pp
ort Mn
tr
Door lock
DOOR LOCK
×
×
×
×
Rear window defogger
REAR DEFOGGER
×
×
Warning chime
BUZZER
×
×
Interior room lamp timer
INT LAMP
×
×
×
Remote keyless entry system
MULTI REMOTE ENT
×
×
×
Exterior lamp
HEAD LAMP
×
×
×
Wiper and washer
WIPER
×
×
×
Turn signal and hazard warning lamps FLASHER
×
×
Air conditioner
AIR CONDITIONER
×
Intelligent Key system
INTELLIGENT KEY
×
Combination switch
COMB SW
×
BCM
BCM
×
×
×
×
×
Immobilizer
IMMU
×
×
×
Interior room lamp battery saver
BATTERY SAVER
×
×
×
Back door open
TRUNK
×
×
Vehicle security system
THEFT ALM
×
×
×
RAP system
RETAINED PWR
×
×
×
Signal buffer system
SIGNAL BUFFER
×
×
TPMS
AIR PRESSURE MONITOR
×
×
×
×
Panic alarm system
PANIC ALARM
×
2011 Pathfinder
DIAGNOSIS SYSTEM (BCM)
SEC-127
< SYSTEM DESCRIPTION >
[WITHOUT INTELLIGENT KEY SYSTEM]
C
D
E
F
G
H
I
J
L
M
A
B
SEC
N
O
P
IMMU
IMMU : CONSULT-III Function (BCM - IMMU)
INFOID:0000000006766977
DATA MONITOR
ACTIVE TEST
THEFT ALM
THEFT ALM : CONSULT-III Function (BCM - THEFT ALM)
INFOID:0000000006766978
DATA MONITOR
* : with Intelligent Key
** : without Intelligent Key
ACTIVE TEST
WORK SUPPORT
Monitor Item [Unit]
Description
IGN ON SW [On/Off]
Indicates condition of ignition switch ON position.
Test Item
Description
THEFT IND
This test is able to check security indicator operation [Off/On].
Monitor Item [Unit]
Description
IGN ON SW [On/Off]
Indicates condition of ignition switch ON position.
ACC ON SW [On/Off]
Indicates condition of ignition switch ACC position.
I-KEY LOCK* [On/Off]
Indicates condition of lock signal from Intelligent Key.
I-KEY UNLOCK* [On/Off]
Indicates condition of unlock signal from Intelligent Key.
KEYLESS LOCK** [On/Off]
Indicates condition of lock signal from keyfob.
KEYLESS UNLOCK** [On/Off]
Indicates condition of unlock signal from keyfob.
DOOR SW-DR [On/Off]
Indicates condition of front door switch LH.
DOOR SW-AS [On/Off]
Indicates condition of front door switch RH.
DOOR SW-RR [On/Off]
Indicates condition of rear door switch RH.
DOOR SW-RL [On/Off]
Indicates condition of rear door switch LH.
BACK DOOR SW [On/Off]
Indicates condition of back door switch.
KEY CYL LK-SW [On/Off]
Indicates condition of lock signal from door key cylinder switch.
KEY CYL UN-SW [On/Off]
Indicates condition of unlock signal from door key cylinder switch.
CDL LOCK SW [On/Off]
Indicates condition of lock signal from door lock and unlock switch.
CDL UNLOCK SW [On/Off]
Indicates condition of unlock signal from door lock and unlock switch.
Test Item
Description
THEFT IND
This test is able to check security indicator lamp operation [Off/On].
VEHICLE SECURITY HORN
This test is able to check vehicle security horn operation [On].
HEADLAMP(HI)
This test is able to check vehicle security lamp operation [On].
Support Item
Setting
Description
SECURITY ALARM SET
Off
Security alarm OFF.
On*
Security alarm ON.
2011 Pathfinder
SEC-128
< SYSTEM DESCRIPTION >
[WITHOUT INTELLIGENT KEY SYSTEM]
DIAGNOSIS SYSTEM (BCM)
*: Initial setting
THEFT ALM TRG
Off/On
The switch which triggered vehicle security alarm is recorded [On]. This mode is able
to confirm and erase the record of vehicle security alarm. The trigger data can be
erased by touching [CLEAR].
CLEAR
Support Item
Setting
Description
2011 Pathfinder
U1000 CAN COMM CIRCUIT
SEC-129
< DTC/CIRCUIT DIAGNOSIS >
[WITHOUT INTELLIGENT KEY SYSTEM]
C
D
E
F
G
H
I
J
L
M
A
B
SEC
N
O
P
DTC/CIRCUIT DIAGNOSIS
U1000 CAN COMM CIRCUIT
Description
INFOID:0000000006246303
CAN (Controller Area Network) is a serial communication line for real time applications. It is an on-vehicle mul-
tiplex communication line with high data communication speed and excellent error detection ability. Modern
vehicle is equipped with many electronic control unit, and each control unit shares information and links with
other control units during operation (not independent). In CAN communication, control units are connected
with 2 communication lines (CAN-H line, CAN-L line) allowing a high rate of information transmission with less
wiring. Each control unit transmits/receives data but selectively reads required data only.
CAN Communication Signal Chart, refer to
LAN-53, "CAN Communication Signal Chart"
DTC Logic
INFOID:0000000006246304
DTC DETECTION LOGIC
Diagnosis Procedure
INFOID:0000000006246305
1.
PERFORM SELF DIAGNOSTIC
1. Turn ignition switch ON and wait for 2 seconds or more.
2. Check “Self Diagnostic Result”.
Is “CAN COMM CIRCUIT” displayed?
YES
>> Refer to
LAN-5, "CAN Communication Control Circuit"
.
NO
>> Refer to
GI-37, "Intermittent Incident"
.
DTC
CONSULT-III display
description
DTC Detection Condition
Possible cause
U1000
CAN COMM CIRCUIT
When BCM cannot communicate CAN com-
munication signal continuously for 2 sec-
onds or more.
In CAN communication system, any item (or items)
of the following listed below is malfunctioning.
• Receiving (TCM)
• Receiving (IPDM E/R)
• Receiving (ECM)
• Receiving (METER/M&A)
• Receiving (MULTI AV)
2011 Pathfinder
SEC-130
< DTC/CIRCUIT DIAGNOSIS >
[WITHOUT INTELLIGENT KEY SYSTEM]
U1010 CONTROL UNIT (CAN)
U1010 CONTROL UNIT (CAN)
Description
INFOID:0000000006246306
CAN (Controller Area Network) is a serial communication line for real time applications. It is an on-vehicle mul-
tiplex communication line with high data communication speed and excellent error detection ability. Modern
vehicle is equipped with many electronic control unit, and each control unit shares information and links with
other control units during operation (not independent). In CAN communication, control units are connected
with 2 communication lines (CAN-H line, CAN-L line) allowing a high rate of information transmission with less
wiring. Each control unit transmits/receives data but selectively reads required data only.
CAN Communication Signal Chart, refer to
LAN-53, "CAN Communication Signal Chart"
DTC Logic
INFOID:0000000006246307
DTC DETECTION LOGIC
Diagnosis Procedure
INFOID:0000000006246308
1.
REPLACE BCM
When DTC [U1010] is detected, replace BCM.
>> Replace BCM. Refer to
BCS-55, "Removal and Installation"
Special Repair Requirement
INFOID:0000000006246309
1.
REQUIRED WORK WHEN REPLACING BCM
Initialize BCM. Refer to CONSULT-III Operation Instruction.
>> Inspection End.
DTC
CONSULT-III display de-
scription
DTC Detection Condition
Possible cause
U1010
CONTROL UNIT (CAN)
When detecting error during the initial diagnosis of CAN control-
ler of BCM.
BCM
2011 Pathfinder
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст