Nissan Cube. Instruction — part 876
ON BOARD DIAGNOSTIC (OBD) SYSTEM
SRC-21
< SYSTEM DESCRIPTION >
C
D
E
F
G
I
J
K
L
M
A
B
SRC
N
O
P
Side air bag system
How to Erase Self Diagnosis Result
After a malfunction is repaired, turn the ignition switch OFF for one second or more, then turn ignition switch
ON. The diagnosis mode returns to the user mode. At that time the self-diagnosis result is cleared.
EXAMPLE OF AIR BAG WARNING LAMP OPERATION IN THE DIAGNOSIS MODE
System Normal
When system is normal.
Single System Malfunction
• Front air bag system
Number of 0.5-second blinks
Malfunctioning items
Blinking pattern
1
Side air bag module RH
Refer to the following items
•
•
•
•
2
Side air bag module LH
Refer to the following items
•
•
•
•
3
Satellite sensor RH
Refer to the following items
•
•
•
•
4
Satellite sensor LH
Refer to the following items
•
•
•
•
5
Curtain air bag module RH
Refer to the following items
•
•
•
•
6
Curtain air bag module LH
Refer to the following items
•
•
•
•
JMHIA0945GB
SRC-22
< SYSTEM DESCRIPTION >
ON BOARD DIAGNOSTIC (OBD) SYSTEM
When air bag diagnosis sensor unit system (Item display 1) is malfunctioning.
• Side air bag system
When curtain air bag module LH system (Item display 1) is malfunctioning.
Multiple Systems Malfunction
• Front air bag system
When driver air bag module (Item display 1) and air bag diagnosis sensor unit system (Item display 2) are
malfunctioning.
• Side air bag system
When satellite sensor LH (Item display1) and curtain air bag module LH system (Item display 2) are malfunc-
tioning.
• Front air bag system and side air bag system
JMHIA0946GB
JMHIA0948GB
JMHIA0947GB
JMHIA0949GB
ON BOARD DIAGNOSTIC (OBD) SYSTEM
SRC-23
< SYSTEM DESCRIPTION >
C
D
E
F
G
I
J
K
L
M
A
B
SRC
N
O
P
When driver air bag module (Item display 1) and satellite sensor RH (Item display2) are malfunctioning.
JMHIA0950GB
SRC-24
< SYSTEM DESCRIPTION >
DIAGNOSIS SYSTEM (AIR BAG)
DIAGNOSIS SYSTEM (AIR BAG)
CONSULT Function
INFOID:0000000009946095
APPLICATION ITEM
CONSULT performs the following functions.
CAUSE OF WARNING LAMP
This item indicates IGN low voltage condition.
The air bag warning lamp blink in user mode when the battery voltage is lowered to the voltage value (less
than 9 V) at which the SRS cannot be operated normally. The air bag warning lamp turns OFF after the battery
voltage returns to normal status after blinking.
In such a case, the DTC memory is not performed and changing to the self-diagnostic mode by IGN operation
cannot be performed while the air bag warning lamp illuminates. “NO DTC” is displayed even if the malfunc-
tioning parts are checked by CONSULT.
This function records the following items.
Diagnosis mode
Description
ECU Identification
Air bag diagnosis sensor unit ECU discriminated number (identification number) or part num-
ber is displayed. Air bag diagnosis sensor unit has individual ECU discriminated number
(identification number) or part number based on model and equipment.
Self Diagnostic Result
• Self-diagnosis result is displayed.
Refer to
.
• “No DTC” is displayed when repair is completed by part replacement or other operations.
• “SELF-DIAG RESULT [MEMORY]” is displayed until “Erase” is performed.
CAUTION:
When “No DTC” is displayed after repair, always perform “Erase”. If this is not done
SRS air bag warning lamp remains blinking when user mode is resumed.
TROUBLE DIAG RECORD
With TROUBLE DIAG RECORD, diagnosis results previously erased by a reset operation
can be displayed on CONSULT screen.
SELF-DIAG RESULTS [CAN]
NOTE:
This item is displayed, but cannot be supported.
Cause of Warning Lamp
It displays the cause of warning lamp illumination that is not recorded in memory.
Display contents of CONSULT
Description
Air bag
IGN VOLT COND
“LOW” is displayed when IGN low voltage is detected. If not, “OK” is dis-
played.
IGN VOLT TIME
Times of IGN low voltage is detected.
LOW V RECORED
Times of IGN ON after IGN low voltage is detected.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст