Nissan Cube. Instruction — part 189
DLK-22
< SYSTEM DESCRIPTION >
[WITH INTELLIGENT KEY SYSTEM]
INTELLIGENT KEY SYSTEM
AUTO DOOR LOCK FUNCTION
After door is unlocked by door request switch operation and if 60 seconds or more passes without performing
the following operation, all doors are automatically locked. However, operation check function does not acti-
vate.
Auto door lock mode can be changed by the “AUTO LOCK SET” mode in “WORK SUPPORT”. Refer to
40, "INTELLIGENT KEY : CONSULT Function (BCM - INTELLIGENT KEY)"
LIST OF OPERATION RELATED PARTS
Parts marked with
×
are the parts related to operation.
Operating condition
• Door switch is ON (door is open)
• Door is locked
• Push switch is pressed
Door lock function
In
tel
lig
en
t Ke
y
Re
mo
te
ke
yl
es
s en
try rec
e
ive
r
Do
or swi
tch
Doo
r re
qu
es
t s
w
itc
h
Do
or l
o
c
k ac
tu
at
o
r
In
si
de
ke
y
an
ten
na
Out
s
id
e ke
y ant
en
na
In
tel
lig
en
t Ke
y warn
ing
b
u
zze
r
CAN co
mm
un
ic
at
io
n
s
ys
tem
BCM
Hazard warning
lamp
Pu
sh
-bu
tto
n i
g
n
iti
on
swi
tch
Co
mb
in
at
io
n
met
e
r
Door lock/unlock function
×
×
×
×
×
×
×
×
Hazard and buzzer reminder function
×
×
×
×
×
Selective unlock function
×
×
×
×
×
×
Auto door lock function
×
×
×
×
INTELLIGENT KEY SYSTEM
DLK-23
< SYSTEM DESCRIPTION >
[WITH INTELLIGENT KEY SYSTEM]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
DOOR LOCK FUNCTION : Component Parts Location
INFOID:0000000009950448
1.
CVT shift selector (detention
switch)*
2.
Remote keyless entry receiver
3.
Push-button ignition switch
4.
Intelligent Key warning buzzer
5.
Inside key antenna (instrument cen-
ter)
6.
Combination meter
JMKIA4006ZZ
DLK-24
< SYSTEM DESCRIPTION >
[WITH INTELLIGENT KEY SYSTEM]
INTELLIGENT KEY SYSTEM
*: With CVT models
DOOR LOCK FUNCTION : Component Description
INFOID:0000000009950449
7.
Back door lock actuator relay
8.
BCM
Refer to
9.
Inside key antenna (luggage room)
A.
Integrated in CVT shift selector
B.
View with glove box assembly re-
moved
C.
View with front bumper removed
D.
Behind the audio unit
E.
Behind the instrument lower panel
LH (Left side)
F.
View with rear seat removed
1.
Outside key antenna (driver side)
2.
Front door request switch (driver
side)
3.
Front door lock assembly (driver
side)
4.
Front door switch (driver side)
5.
Outside antenna (back door)
6.
Back door lock assembly
7.
Back door request switch
JMKIA4336ZZ
Item
Function
BCM
Controls the door lock function
Door lock actuator
Inputs lock/unlock signal from BCM and locks/unlocks each door
Door switch
Inputs door open/close condition to BCM
Remote keyless entry receiver
Receives lock/unlock signal from the Intelligent Key, and then transmits to BCM
Door request switch
Inputs lock/unlock operation to BCM
Intelligent Key
Transmits button operation to remote keyless entry receiver
Outside key antenna
Detects if Intelligent Key is outside the vehicle
Inside key antenna
Detects if Intelligent Key is inside the vehicle
Push-button ignition switch
Inputs push-button ignition switch ON/OFF condition to BCM
Intelligent Key warning buzzer
Warns the user of the lock/unlock condition and inappropriate operations with the buzzer sound
INTELLIGENT KEY SYSTEM
DLK-25
< SYSTEM DESCRIPTION >
[WITH INTELLIGENT KEY SYSTEM]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
REMOTE KEYLESS ENTRY FUNCTION
REMOTE KEYLESS ENTRY FUNCTION : System Diagram
INFOID:0000000009950450
REMOTE KEYLESS ENTRY FUNCTION : System Description
INFOID:0000000009950451
The Intelligent Key has the same functions as the remote control entry system. Therefore, it can be used in the
same manner as the remote controller by operating the door lock/unlock button.
OPERATION
Remote keyless entry system controls operation of the following items.
• Door lock/unlock
• Selective unlock
• Hazard and horn reminder
• Auto door lock
OPERATION AREA
To check that the Intelligent Key works normally, use within 1 m (3 ft) range of each doors, however the opera-
ble range may differ according to surroundings.
DOOR LOCK/UNLOCK FUNCTION
• When door lock/unlock button of the Intelligent Key is pressed, lock signal or unlock signal transmitted from
Intelligent Key to BCM via remote keyless entry receiver.
• When BCM receives the door lock/unlock signal, it operates all door lock actuators and the hazard lamp
(lock: 2 times, unlock: 1 time) and horn chirp signal to IPDM E/R at the same time as a reminder.
• IPDM E/R honks horn (lock: 2 times) as a reminder
OPERATION CONDITION
SELECTIVE UNLOCK FUNCTION
• When an LOCK signal is transmitted from Intelligent Key, all doors are locked.
• When an UNLOCK signal is transmitted from Intelligent Key once, driver side door is unlocked.
Back door lock actuator relay
Controls the back door lock/unlock operation
Hazard warning lamp
Warns the user of the door lock/unlock condition and in appropriate operations with the lamps blink
Item
Function
JMKIA4010GB
Remote controller operation
Operation condition
Lock
• Panic alarm is not activated
• P position warning is not activated
Unlock
Panic alarm is not activated
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст