Nissan Cube. Instruction — part 849
SECURITY INDICATOR LAMP
SEC-207
< DTC/CIRCUIT DIAGNOSIS >
[WITHOUT INTELLIGENT KEY SYSTEM]
C
D
E
F
G
H
I
J
L
M
A
B
SEC
N
O
P
3.
Check continuity between combination meter harness connector and ground.
Is the inspection result normal?
YES
>> Replace combination meter. Refer to
MWI-93, "Removal and Installation"
NO
>> Repair or replace harness.
Combination meter
BCM
Continuity
Connector
Terminal
Connector
Terminal
M34
18
M65
23
Existed
Combination meter
Ground
Continuity
Connector
Terminal
M34
18
Not existed
SEC-208
< DTC/CIRCUIT DIAGNOSIS >
[WITHOUT INTELLIGENT KEY SYSTEM]
HORN FUNCTION
HORN FUNCTION
Description
INFOID:0000000009950291
Perform answer-back for each operation with horn.
Component Function Check
INFOID:0000000009950292
1.
CHECK FUNCTION
1.
Perform “VEHICLE SECURITY HORN” in the “ACTIVE TEST” mode using CONSULT.
2.
Check the horn operation.
Is the operation normal?
YES
>> Horn function is OK.
NO
>> Go to
SEC-208, "Diagnosis Procedure"
Diagnosis Procedure
INFOID:0000000009950293
1.
CHECK HORN FUNCTION
Check horn function with horn switch.
Do the horn sound?
YES
>> GO TO 2.
NO
>> Refer to
HRN-2, "Wiring Diagram - HORN -"
.
2.
CHECK IPDM E/R POWER SUPPLY
1.
Disconnect IPDM E/R connector.
2.
Check voltage between IPDM E/R harness connector and ground.
Is the inspection result normal?
YES
>> Replace IPDM E/R. Refer to
PCS-64, "Removal and Installation"
NO
>> GO TO 3.
3.
CHECK IPDM E/R POWER SUPPLY CIRCUIT
1.
Disconnect horn relay connector.
2.
Check continuity between IPDM E/R harness connector and horn relay harness connector.
3.
Check continuity between IPDM E/R harness connector and ground.
Is the inspection result normal?
YES
>> GO TO 4.
NO
>> Repair or replace harness.
Test item
Description
VEHICLE SECURITY HORN
ON
Horn
Sounds (for 20 ms)
(+)
(–)
Voltage (V)
(Approx.)
IPDM E/R
Connector
Terminal
E13
34
Ground
Battery voltage
IPDM E/R
Horn relay
Continuity
Connector
Terminal
Connector
Terminal
E13
34
E5
1
Existed
IPDM E/R
Ground
Continuity
Connector
Terminal
E13
34
Not existed
HORN FUNCTION
SEC-209
< DTC/CIRCUIT DIAGNOSIS >
[WITHOUT INTELLIGENT KEY SYSTEM]
C
D
E
F
G
H
I
J
L
M
A
B
SEC
N
O
P
4.
CHECK INTERMITTENT INCIDENT
>> INSPECTION END
SEC-210
< DTC/CIRCUIT DIAGNOSIS >
[WITHOUT INTELLIGENT KEY SYSTEM]
HEADLAMP FUNCTION
HEADLAMP FUNCTION
Description
INFOID:0000000009950294
Headlamp lighting when vehicle security system is alarm phase.
Component Function Check
INFOID:0000000009950295
1.
CHECK FUNCTION
1.
Perform “HEAD LAMP(HI)” in the “ACTIVE TEST” mode using CONSULT.
2.
Check headlamp operation.
Is the inspection result normal?
YES
>> INSPECTION END
NO
>> Refer to
SEC-210, "Diagnosis Procedure"
Diagnosis Procedure
INFOID:0000000009950296
1.
CHECK HEADLAMP FUNCTION
EXL-42, "Component Function Check"
.
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Repair or replace the malfunctioning parts.
2.
CHECK INTERMITTENT INCIDENT
>> INSPECTION END
Test item
Description
HEAD LAMP (HI)
ON
HEADLAMP (HI)
Lighting
OFF
Does not lighting
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст