Nissan Cube. Instruction — part 755
POWER SUPPLY AND GROUND CIRCUIT
PWC-17
< DTC/CIRCUIT DIAGNOSIS >
C
D
E
F
G
H
I
J
L
M
A
B
PWC
N
O
P
FRONT POWER WINDOW SWITCH (PASSENGER SIDE)
FRONT POWER WINDOW SWITCH (PASSENGER SIDE) : Diagnosis Procedure
INFOID:0000000009950858
1.
CHECK POWER SUPPLY CIRCUIT
1.
Turn ignition switch OFF.
2.
Disconnect front power window switch (passenger side) connector.
3.
Turn ignition switch ON.
4.
Check voltage between front power window switch (passenger side) harness connector and ground.
Is the inspection result normal?
YES
>> INSPECTION END
NO
>> GO TO 2.
2.
CHECK HARNESS CONTINUITY
1.
Turn ignition switch OFF.
2.
Disconnect BCM connector.
3.
Check continuity between BCM harness connector and front power window switch (passenger side) har-
ness connector.
4.
Check continuity between BCM harness connector and ground.
Is the inspection result normal?
YES
>> Replace BCM. Refer to
BCS-88, "Removal and Installation"
(With Intelligent Key). Refer to
155, "Removal and Installation"
(Without Intelligent Key).
NO
>> Repair or replace harness.
REAR POWER WINDOW SWITCH
REAR POWER WINDOW SWITCH : Diagnosis Procedure
INFOID:0000000009950859
1.
CHECK POWER SUPPLY CIRCUIT
1.
Turn ignition switch OFF.
2.
Disconnect rear power window switch connector.
3.
Turn ignition switch ON.
4.
Check voltage between rear power window switch harness connector and ground.
(+)
(–)
Voltage (V)
(Approx.)
Front power window switch (passenger side)
Connector
Terminal
D25
8
Ground
Battery voltage
BCM
Front power window switch (passenger side)
Continuity
Connector
Terminal
Connector
Terminal
M67: Without Intelligent Key
M70: With Intelligent Key
68
D25
8
Existed
BCM
Ground
Continuity
Connector
Terminal
M67: Without Intelligent Key
M70: With Intelligent Key
68
Not existed
PWC-18
< DTC/CIRCUIT DIAGNOSIS >
POWER SUPPLY AND GROUND CIRCUIT
Is the inspection result normal?
YES
>> INSPECTION END
NO
>> GO TO 2.
2.
CHECK HARNESS CONTINUITY
1.
Turn ignition switch OFF.
2.
Disconnect BCM connector.
3.
Check continuity between BCM harness connector and rear power window switch harness connector.
4.
Check continuity between BCM harness connector and ground.
Is the inspection result normal?
YES
BCS-88, "Removal and Installation"
(With Intelligent Key). Refer to
155, "Removal and Installation"
(Without Intelligent Key).
NO
>> Repair or replace harness.
(+)
(–)
Voltage (V)
(Approx.)
Rear power window switch
Connector
Terminal
LH
D63
1
Ground
Battery voltage
RH
D43
BCM
Rear power window switch
Continuity
Connector
Terminal
Connector
Terminal
M67: Without Intelligent Key
M70: With Intelligent Key
68
LH
D63
1
Existed
RH
D43
BCM
Ground
Continuity
Connector
Terminal
M67: Without Intelligent Key
M70: With Intelligent Key
68
Not existed
FRONT POWER WINDOW SWITCH (PASSENGER SIDE)
PWC-19
< DTC/CIRCUIT DIAGNOSIS >
C
D
E
F
G
H
I
J
L
M
A
B
PWC
N
O
P
FRONT POWER WINDOW SWITCH (PASSENGER SIDE)
Description
INFOID:0000000009950860
Front power window motor (passenger side) will be operated if front power window switch (passenger side) is
operated.
Component Function Check
INFOID:0000000009950861
1.
CHECK FRONT POWER WINDOW SWITCH (PASSENGER SIDE) FUNCTION
Check front power window motor (passenger side) operation with front power window switch (passenger side).
Is the inspection result normal?
YES
>> Front power window switch (passenger side) is OK.
NO
>> Refer to
.
Diagnosis Procedure
INFOID:0000000009950862
1.
CHECK FRONT POWER WINDOW SWITCH (PASSENGER SIDE) INPUT SIGNAL
1.
Turn ignition switch OFF.
2.
Disconnect front power window switch (passenger side) connector.
3.
Turn ignition switch ON.
4.
Check voltage between front power window switch (passenger side) harness connector and ground.
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> GO TO 3.
2.
CHECK FRONT POWER WINDOW SWITCH (PASSENGER SIDE)
Check front power window switch (passenger side).
Refer to
PWC-20, "Component Inspection"
Is the inspection result normal?
YES
>> GO TO 4.
NO
>> Replace front power window switch (passenger side). Refer to
PWC-112, "Removal and Installa-
.
3.
CHECK FRONT WINDOW SWITCH (PASSENGER SIDE) CIRCUIT
1.
Turn ignition switch OFF.
2.
Disconnect power window main switch connector.
3.
Check continuity between power window main switch harness connector and front power window switch
(passenger side) harness connector.
4.
Check continuity between power window main switch harness connector and ground.
(+)
(–)
Condition
Voltage (V)
(Approx.)
Front power window switch (passenger side)
Connector
Terminal
D25
12
Ground
Power window
main switch
(passenger side)
UP
Battery voltage
DOWN
0
11
UP
0
DOWN
Battery voltage
Power window main switch
Front power window switch (passenger side)
Continuity
Connector
Terminal
Connector
Terminal
D5
16
D25
12
Existed
12
11
PWC-20
< DTC/CIRCUIT DIAGNOSIS >
FRONT POWER WINDOW SWITCH (PASSENGER SIDE)
Is the inspection result normal?
YES
>> Replace power window main switch. Refer to
PWC-112, "Removal and Installation"
.
NO
>> Repair or replace harness.
4.
CHECK INTERMITTENT INCIDENT
GI-40, "Intermittent Incident"
>> INSPECTION END
Component Inspection
INFOID:0000000009950863
1.
CHECK FRONT POWER WINDOW SWITCH (PASSENGER SIDE)
1.
Turn ignition OFF.
2.
Disconnect front power window switch (passenger side) connector.
3.
Check front power window switch (passenger side).
Is the inspection result normal?
YES
>> INSPECTION END
NO
>> Replace front power window switch (passenger side). Refer to
PWC-112, "Removal and Installa-
.
Power window main switch
Ground
Continuity
Connector
Terminal
D5
16
Not existed
12
Front power window switch
(passenger side)
Front power window switch condition
Continuity
Terminal
8
7
UP
Existed
11
6
11
6
NEUTRAL
12
7
8
6
DOWN
12
7
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст