Nissan March K13. Instruction — part 465
MIR-36
< REMOVAL AND INSTALLATION >
OUTSIDE MIRROR
1.
Remove door mirror corner cover with a remover tool.
2.
Remove front door finisher. Refer to
INT-14, "Removal and Installation"
3.
Disconnect door mirror harness connector.
4.
Remove door mirror mounting nuts, and remove door mirror assembly.
INSTALLATION
Install in the reverse order of removal.
REMOVAL
MANUAL MIRROR
1.
Remove door mirror corner cover with a remover tool.
2.
Disengage instruction controller lever fixing pawls and remove.
3.
Remove door mirror mounting nuts, and remove door mirror assembly.
INSTALLATION
Install in the reverse order of removal.
GLASS MIRROR
GLASS MIRROR : Disassembly and Assembly
INFOID:0000000006007927
DISASSEMBLY
1.
Place the glass mirror upward.
2.
Put a strip of protective tape (B) on housing assembly.
3.
Insert a small flat-bladed screwdriver (A) into the recess at lower side between glass mirror (1) and actua-
tor (2), and push up pawls to remove glass mirror lower side.
NOTE:
Insert a small flat-bladed screwdriver into recesses, and push up while rotating (twisting) to make work
easier.
4.
Insert a small flat-bladed screwdriver at (LH/RH) side between glass mirror and actuator, and push up
pawls to remove glass mirror LH/RH side.
NOTE:
Insert a small flat-bladed screwdriver into recesses, and push up while rotating (twisting) to make work
easier.
ASSEMBLY
Assemble in the reverse order of disassembly.
CAUTION:
: Pawl
JMLIA0989ZZ
JMLIA0990ZZ
OUTSIDE MIRROR
MIR-37
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
J
K
M
A
B
MIR
N
O
P
After installation, visually check that pawls are securely engaged.
DOOR MIRROR COVER
DOOR MIRROR COVER : Disassembly and Assembly
INFOID:0000000006007929
DISASSEMBLY
1.
Remove the glass mirror. Refer to
MIR-36, "GLASS MIRROR : Disassembly and Assembly"
2.
Remove the pawls with a remover tool (A), and disassemble the
door mirror cover (1) from the mirror assembly.
ASSEMBLY
Assemble in the reverse order of disassembly.
CAUTION:
After installation, visually check that pawls are securely engaged.
: Pawl
B
: Protective tape
JMLIA0991ZZ
MIR-38
< REMOVAL AND INSTALLATION >
DOOR MIRROR REMOTE CONTROL SWITCH
DOOR MIRROR REMOTE CONTROL SWITCH
Removal and Installation
INFOID:0000000006007931
REMOVAL
1.
Remove the switch panel. Refer to
IP-13, "Removal and Installation"
2.
Remove door mirror remote control switch from switch panel using flat-bladed screwdriver.
INSTALLATION
Install in the reverse order of removal.
MWI
MWI-1
DRIVER INFORMATION & MULTIMEDIA
C
D
E
F
G
H
I
J
K
L
M
B
SECTION
MWI
A
O
P
CONTENTS
METER, WARNING LAMP & INDICATOR
PRECAUTION . . . . . . . . . . . ...
PRECAUTIONS . . . . . . . . . . . . ...
Precaution for Battery Service . . . . . . . . ..
SYSTEM DESCRIPTION . . . . . . . ..
COMPONENT PARTS . . . . . . . . . .
Component Parts Location . . . . . . . . . ....
Component Description . . . . . . . . . . .....
SYSTEM . . . . . . . . . . . . . . . ..
METER SYSTEM . . . . . . . . . . . . . .....
METER SYSTEM : System Diagram . . . . . ....
METER SYSTEM : System Description . . . . ....
METER SYSTEM : Fail-Safe . . . . . . . . ....
SPEEDOMETER . . . . . . . . . . . . . . ..
SPEEDOMETER : System Diagram . . . . . .....
SPEEDOMETER : System Description . . . . .....
TACHOMETER . . . . . . . . . . . . . . ....
TACHOMETER : System Diagram . . . . . . ...
TACHOMETER : System Description . . . . . ...
HIGH WATER TEMPERATURE WARNING LAMP
. ..
HIGH WATER TEMPERATURE WARNING
LAMP : System Diagram . . . . . . . . . . ...
HIGH WATER TEMPERATURE WARNING
LAMP : System Description . . . . . . . . . ..
OIL PRESSURE WARNING LAMP . . . . . . ...
OIL PRESSURE WARNING LAMP : System Dia-
gram . . . . . . . . . . . . . . . . . .
OIL PRESSURE WARNING LAMP : System De-
scription . . . . . . . . . . . . . . . . ...
METER ILLUMINATION CONTROL . . . . . . .
METER ILLUMINATION CONTROL : System Di-
agram . . . . . . . . . . . . . . . . . ..
METER ILLUMINATION CONTROL : System De-
scription . . . . . . . . . . . . . . . . ...
INFORMATION DISPLAY . . . . . . . . . . ..
INFORMATION DISPLAY : System Diagram . . ..
INFORMATION DISPLAY : System Description . .
OPERATION . . . . . . . . . . . . . .
Switch Name and Function . . . . . . . . . ..
DIAGNOSIS SYSTEM (COMBINATION
METER) . . . . . . . . . . . . . . . .
On Board Diagnosis Function . . . . . . . . ..
CONSULT-III Function . . . . . . . . . . .
ECU DIAGNOSIS INFORMATION . . . ..
COMBINATION METER . . . . . . . . ...
Reference Value . . . . . . . . . . . . . ..
Fail-Safe . . . . . . . . . . . . . . . . ..
DTC Index . . . . . . . . . . . . . . . ...
IPDM E/R (INTELLIGENT POWER DISTRI-
BUTION MODULE ENGINE ROOM) . . . .
List of ECU Reference . . . . . . . . . . . .
WIRING DIAGRAM . . . . . . . . . ..
METER SYSTEM . . . . . . . . . . . ..
LHD . . . . . . . . . . . . . . . . . . .
LHD : Wiring Diagram . . . . . . . . . . . ..
RHD . . . . . . . . . . . . . . . . . . .
RHD : Wiring Diagram . . . . . . . . . . . .
BASIC INSPECTION . . . . . . . . ...
DIAGNOSIS AND REPAIR WORKFLOW . .
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст