Nissan March K13. Instruction — part 427
IP-18
< REMOVAL AND INSTALLATION >
INSTRUMENT PANEL ASSEMBLY
22. Remove optical sensor (with Auto light system) Refer to
XX-XX, "*****"
.
23. Remove sunload sensor (with Auto A/C). Refer to
HAC-78, "Removal and Installation"
24. Remove glove box lid or glove box escutcheon.
• Glove box lid
- Open the glove box lid (1).
- Pull the glove box lid toward vehicle upper, and then disengage the joint from the instrument panel
assembly.
• Glove box escutcheon
- Remove glove box escutcheon fixing screws (A).
- Insert a remover tool (B) between glove box escutcheon and instrument panel assembly, and then dis-
engage clips and pawls.
- Pull back glove box escutcheon.
25. Remove glove upper box assembly or instrument finisher B.
• Glove upper box assembly
- Remove glove upper box assembly fixing screws (A).
- Insert a remover tool (D) between glove upper box assembly and glove box cover, and then disengage
metal clips.
- Pull back glove upper box assembly.
• Instrument finisher B
- Remove instrument finisher B fixing screws (C).
- Insert a remover tool (D) between glove upper box assembly and glove box cover, and then disengage
metal clips.
- Pull back glove upper box assembly.
Glove box lid
Glove box escutcheon
: Clip
: Pawl
JMJIA3992ZZ
Glove upper box assembly (with Glove box lid)
Instrument finisher B (without Glove box lid)
: Metal clip
JMJIA3993ZZ
INSTRUMENT PANEL ASSEMBLY
IP-19
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
K
L
M
A
B
IP
N
O
P
26. Remove glove box cover.
1.
Remove glove box cover fixing screws (A).
2.
Pull back glove box cover, and disengage pawl and metal
clips.
NOTE:
For models with glove box lid, glove cover is tightened together
to glove box striker.
27. Remove Instrument finisher D or front passenger air bag module.
• Instrument finisher D
- Remove instrument finisher D fixing screws (A).
- Lift up instrument finisher D, and then disengage pawls.
• Front passenger air bag module: Refer to
SR-19, "Removal and Installation"
28. Remove front body side welt LH. Refer to
INT-23, "BODY SIDE WELT : Removal and Installation"
29. Remove front pillar garnish LH. Refer to
INT-22, "FRONT PILLAR GARNISH : Removal and Installation"
.
30. Remove instrument side finisher LH.
1.
Insert a remover tool (A) between instrument side finisher
LH and instrument lower panel LH, and then disengage
pawls.
2.
Pull the instrument side finisher LH direction of the arrow.
CAUTION:
Apply protective tape on the part to protect from damage.
31. Remove instrument panel assembly.
: Pawl
: Metal clip
JMJIA3994ZZ
: Pawl
JMJIA4078ZZ
: Pawl
JMJIA3998ZZ
IP-20
< REMOVAL AND INSTALLATION >
INSTRUMENT PANEL ASSEMBLY
1.
Remove instrument panel assembly mounting screws (A).
CAUTION:
Cover tool with a shop cloth to prevent windshield glass from being damaged.
2.
Disengage harness (A) and harness (B) of front pillar LH and RH portions from instrument panel
assembly.
3.
Remove instrument panel from passenger door opening portion.
CAUTION:
• Cover A/T shift selector upper surface with a shop cloth to prevent it from being damaged.
• When removing instrument panel assembly, 2 workers are required to prevent it from drop-
ping.
32. Remove the following parts after removing instrument panel assembly.
• Side ventilator grille LH/RH: Refer to
VTL-5, "SIDE VENTILATOR GRILLE : Removal and Installation"
• Center ventilator duct LH/RH: Refer to
VTL-6, "CENTER VENTILATOR DUCT : Removal and Installa-
INSTALLATION
Install in the reverse order of removal.
JMJIA3995ZZ
JMJIA3996ZZ
CENTER CONSOLE ASSEMBLY
IP-21
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
K
L
M
A
B
IP
N
O
P
CENTER CONSOLE ASSEMBLY
Exploded View
INFOID:0000000006022705
Removal and Installation
INFOID:0000000006044252
CAUTION:
When removing, always use a remover tool that is made of plastic.
REMOVAL
1.
Shift selector lever knob in “N” position. (A/T models)
2.
Remove shift knob. (M/T models)
3.
Release the parking brake lever by turning the adjusting nut with a deep socket wrench and loosening the
cable. Refer to
PB-2, "Inspection and Adjustment"
.
1.
Console boot
2.
Center console assembly
(M/T models)
3.
Center console assembly
(A/T models)
4.
Switches
5.
Console switch bracket
: Clip
JMJIA3999ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст