Nissan March K13. Instruction — part 547
ENCODER CIRCUIT
PWC-31
< DTC/CIRCUIT DIAGNOSIS >
C
D
E
F
G
H
I
J
L
M
A
B
PWC
N
O
P
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> Repair or replace harness.
3.
CHECK ENCODER POWER SUPPLY CIRCUIT
1.
Connect power window main switch connector.
2.
Turn ignition switch ON.
3.
Check voltage between front power window motor (driver side) harness connector and ground.
Is the inspection result normal?
YES
>> GO TO 4.
NO
>> GO TO 5.
4.
CHECK GROUND CIRCUIT
1.
Turn ignition switch OFF.
2.
Check continuity between front power window motor (driver side) harness connector and ground.
Is the inspection result normal?
YES
>> GO TO 7.
NO
>> GO TO 6.
5.
CHECK HARNESS CONTINUITY 1
1.
Turn ignition switch OFF.
2.
Check continuity between power window main switch harness connector and front power window motor
(driver side) harness connector.
3.
Check continuity between power window main switch harness connector and ground.
Is the inspection result normal?
YES
>> Replace power window main switch. Refer to
PWC-44, "Removal and Installation"
NO
>> Repair or replace harness.
6.
CHECK HARNESS CONTINUITY 2
1.
Disconnect power window main switch connector.
2.
Check continuity between power window main switch harness connector and front power window motor
(driver side) harness connector.
Is the inspection result normal?
(+)
(-)
Voltage (V)
(Approx.)
Front power window motor (driver side)
Connector
Terminal
D7
2
Ground
12
Front power window motor (driver side)
Ground
Continuity
Connector
Terminal
D7
4
Existed
Power window main switch
Front power window motor (driver side)
Continuity
Connector
Terminal
Connector
Terminal
D5
15
D7
2
Existed
Power window main switch
Ground
Continuity
Connector
Terminal
D5
15
Not existed
Power window main switch
Front power window motor (driver side)
Continuity
Connector
Terminal
Connector
Terminal
D5
9
D7
4
Existed
PWC-32
< DTC/CIRCUIT DIAGNOSIS >
ENCODER CIRCUIT
YES
>> Replace power window main switch. Refer to
PWC-44, "Removal and Installation"
NO
>> Repair or replace harness.
7.
CHECK INTERMITTENT INCIDENT
GI-33, "Intermittent Incident"
>> INSPECTION END
NONE OF THE POWER WINDOWS CAN BE OPERATED USING ANY SWITCH
PWC-33
< SYMPTOM DIAGNOSIS >
C
D
E
F
G
H
I
J
L
M
A
B
PWC
N
O
P
SYMPTOM DIAGNOSIS
NONE OF THE POWER WINDOWS CAN BE OPERATED USING ANY
SWITCH
Diagnosis Procedure
INFOID:0000000005978550
1.
CHECK BCM POWER SUPPLY AND GROUND CIRCUIT
Check BCM power supply and ground circuit. Refer to following.
• With Intelligent Key :
PWC-17, "BCM (BODY CONTROL SYSTEM) (WITH INTELLIGENT KEY SYSTEM) :
.
• Without Intelligent Key :
PWC-17, "BCM (BODY CONTROL SYSTEM) (WITHOUT INTELLIGENT KEY
SYSTEM) : Diagnosis Procedure"
.
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Repair or replace the malfunctioning parts.
2.
CHECK POWER WINDOW MAIN SWITCH POWER SUPPLY AND GROUND CIRCUIT
Check power window main switch power supply and ground circuit.
Refer to
PWC-18, "POWER WINDOW MAIN SWITCH : Diagnosis Procedure"
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> Repair or replace the malfunctioning parts.
3.
CONFIRM THE OPERATION
Confirm the operation again.
Is the result normal?
YES
>> Check intermittent incident. Refer to
GI-33, "Intermittent Incident"
.
NO
>> GO TO 1.
PWC-34
< SYMPTOM DIAGNOSIS >
DRIVER SIDE POWER WINDOW DOES NOT OPERATE
DRIVER SIDE POWER WINDOW DOES NOT OPERATE
Diagnosis Procedure
INFOID:0000000005978551
1.
CHECK FRONT POWER WINDOW MOTOR (DRIVER SIDE)
Check front power window motor (driver side).
Refer to
PWC-26, "DRIVER SIDE : Component Function Check"
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Repair or replace the malfunctioning parts.
2.
CONFIRM THE OPERATION
Confirm the operation again.
Is the result normal?
YES
>> Check intermittent incident. Refer to
GI-33, "Intermittent Incident"
.
NO
>> GO TO 1.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст