Nissan March K13. Instruction — part 400
HAC-134
< WIRING DIAGRAM >
[HEATER AND VENTILATION]
HEATER AND VENTILATION CONTROL SYSTEM
JCIWM0497GB
HEATER AND VENTILATION CONTROL SYSTEM
HAC-135
< WIRING DIAGRAM >
[HEATER AND VENTILATION]
C
D
E
F
G
H
J
K
L
M
A
B
HAC
N
O
P
JCIWM0498GB
HAC-136
< BASIC INSPECTION >
[HEATER AND VENTILATION]
DIAGNOSIS AND REPAIR WORKFLOW
BASIC INSPECTION
DIAGNOSIS AND REPAIR WORKFLOW
Work Flow
INFOID:0000000006024162
OVERALL SEQUENCE
DETAILED FLOW
JPIIA1673GB
DIAGNOSIS AND REPAIR WORKFLOW
HAC-137
< BASIC INSPECTION >
[HEATER AND VENTILATION]
C
D
E
F
G
H
J
K
L
M
A
B
HAC
N
O
P
1.
INTERVIEW FOR MALFUNCTION
Interview the symptom to the customer.
>> GO TO 2.
2.
SYMPTOM CHECK
Check the symptom from the customer's information.
>> GO TO 3.
3.
BASIC INSPECTION
Check the operation of each part. Check that any symptom occurs other than the interviewed symptom.
>> GO TO 4.
4.
SELF-DIAGNOSIS WITH CONSULT-III
Perform the self-diagnosis with CONSULT-III. Check that any DTC is detected.
Is any DTC detected?
YES
>> GO TO 5.
NO
>> GO TO 6.
5.
TROUBLE DIAGNOSIS BY DTC
Perform the trouble diagnosis for the detected DTC. Specify the malfunctioning part.
>> GO TO 6.
6.
SYMPTOM DIAGNOSIS
Perform the symptom diagnosis. Specify the malfunctioning part.
>> GO TO 7.
7.
MALFUNCTION PART REPAIR
Repair or replace the malfunctioning part.
>> GO TO 8.
8.
REPAIR CHECK (SELF-DIAGNOSIS WITH CONSULT-III)
Perform the self-diagnoses with CONSULT-III. Check that any DTC is not detected. Erase DTC if DTC is
detected before the repair. Check that DTC is not detected again.
Is any or malfunction result or DTC detected?
YES
>> If DTC is detected, GO TO 5.
NO
>> GO TO 9.
9.
REPAIR CHECK (OPERATION CHECK)
Check the operation of each part.
Does it operate normally?
YES
>> INSPECTION END
NO
>> GO TO 3.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст