Nissan March K13. Instruction — part 478
MWI-50
< SYMPTOM DIAGNOSIS >
NORMAL OPERATING CONDITION
NORMAL OPERATING CONDITION
INFORMATION DISPLAY
INFORMATION DISPLAY : Description
INFOID:0000000005883923
POSSIBLE DRIVING DISTANCE
The calculated possible driving distance may differ from the actual distance to empty if the refueling amount is
approximately 9 (2 Imp gal) or less. This is because the refuel control (moves the fuel gauge needle quicker
than normal judging that the driver is refueling the vehicle) is not performing.
MWI
COMBINATION METER
MWI-51
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
REMOVAL AND INSTALLATION
COMBINATION METER
Exploded View
INFOID:0000000005883924
REMOVAL
.
DISASSEMBLY
Removal and Installation
INFOID:0000000005883925
REMOVAL
1.
Remove the cluster lid A. Refer to
IP-13, "Removal and Installation"
.
2.
Remove screws, connector, and clips, and then remove combination meter.
Dummy cross-reference("XX-
XX")
INSTALLATION
Install in the reverse order of removal.
Disassembly and Assembly
INFOID:0000000005883926
DISASSEMBLY
Disengage the tabs to separate front cover.
ASSEMBLY
Assemble in the reverse order of disassembly.
1.
Unified meter control unit
2.
Front cover
JSNIA2929ZZ
PB-1
BRAKES
C
D
E
G
H
I
J
K
L
M
SECTION
PB
A
B
PB
N
O
P
CONTENTS
PARKING BRAKE SYSTEM
PERIODIC MAINTENANCE . . . . . . ..
PARKING BRAKE SYSTEM . . . . . . . ...
Inspection and Adjustment . . . . . . . . . ....
REMOVAL AND INSTALLATION . . . .
PARKING BRAKE CONTROL . . . . . . .
Exploded View . . . . . . . . . . . . . . ..
Removal and Installation . . . . . . . . . . ...
Adjustment . . . . . . . . . . . . . . . ....
SERVICE DATA AND SPECIFICATIONS
(SDS) . . . . . . . . . . . . . . . .
SERVICE DATA AND SPECIFICATIONS
(SDS) . . . . . . . . . . . . . . . . ..
PB-2
< PERIODIC MAINTENANCE >
PARKING BRAKE SYSTEM
PERIODIC MAINTENANCE
PARKING BRAKE SYSTEM
Inspection and Adjustment
INFOID:0000000006037609
INSPECTION
Lever Stroke
1.
Operate the parking brake lever with a force of 196 N (20 kg, 44 lb). Check that the lever stroke is within
the specified number of notches. (Check it by listening to the clicks of the ratchet.)
2.
When parking brake warning lamp turns ON, check that the lever stroke is within the specified number of
notches. (Check it by listening to the clicks of the ratchet.)
Inspect Components
• Check each component for installation condition such as looseness.
• Check the parking brake lever assembly for bend, damage and cracks. Replace if necessary.
• Check the cables and equalizer for wear, damage and cracks. Replace if necessary.
• Check the parking brake switch, and replace it if necessary. Refer to
ADJUSTMENT
1.
Pull parking brake lever until a socket wrench can be inserted to
adjusting nut.
2.
Turning the adjusting nut with a socket wrench and loosening
the front cable.
3.
Depress the brake pedal with a force of 196 N (20 kg, 44 lb)
about 10 times and adjust the brake shoe clearance.
CAUTION:
Make sure to securely operate the brake pedal.
4.
Check a drag of rear drum brake. Refer to
5.
Adjust the cable with the following procedure.
a.
Operate and maintain the parking brake lever with a 400 N (41 kg, 90 lb) for 30 minutes or more.
b.
Adjust the parking brake lever stroke by turning the adjusting nut with a socket wrench.
CAUTION:
Never reuse the adjusting nut if the nut is removed.
c.
Operate the parking brake lever with a force of 196 N (20 kg, 44lb). Check that the lever stroke is within
the specified number of notches. (Check it by listening to the clicks of the ratchet.)
d.
Rotate the brake drum with the parking brake lever released and check that there is no drag. Refer to
41, "Inspection and Adjustment"
.
Number of notches
: Refer to
Number of notches
: Refer to
Number of notches
: Refer to
JPFIB0119ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст