Nissan March K13. Instruction — part 403
HAC-146
< REMOVAL AND INSTALLATION >
[HEATER AND VENTILATION]
HEATER CONTROL
REMOVAL AND INSTALLATION
HEATER CONTROL
Exploded View
INFOID:0000000006024192
Removal and Installation
INFOID:0000000006024193
REMOVAL
1.
Remove A/C finisher. Refer to
XX-XX, "*****"
.
2.
Remove the heater control mounting screws.
3.
Remove the air mix door cable from the A/C unit assembly. Refer to
XX-XX, "*****"
.
4.
Remove the mode door cable from the A/C unit assembly. Refer to
XX-XX, "*****"
.
5.
Disconnect harness connector.
6.
Remove the A/C control.
INSTALLATION
Installation is basically the reverse order of removal.
1.
Air mix door cable (with heater mod-
els)
2.
Illumination bulb
3.
Mode door cable
4.
A/C control
5.
Intake door cable
6.
Knob
7.
A/C finisher
8.
Mode dial
9.
Temperature dial (with heater mod-
els)
10. Fan control dial
A.
To mode door link
B.
To air mix door link
C.
Intake door link
JMIIA0753ZZ
BLOWER FAN RESISTOR
HAC-147
< REMOVAL AND INSTALLATION >
[HEATER AND VENTILATION]
C
D
E
F
G
H
J
K
L
M
A
B
HAC
N
O
P
BLOWER FAN RESISTOR
Exploded View
INFOID:0000000006024194
Removal and Installation
INFOID:0000000006057680
REMOVAL
1.
Remove instrument panel assembly. Refer to
IP-13, "Removal and Installation"
.
2.
Disconnect blower fan resistor connector.
3.
Remove mounting screws, and then remove blower fan resistor.
INSTALLATION
Install in the reverse order of removal.
HAC-148
< REMOVAL AND INSTALLATION >
[HEATER AND VENTILATION]
DOOR CABLE
DOOR CABLE
Exploded View
INFOID:0000000006069124
INTAKE DOOR CABLE
INTAKE DOOR CABLE : Removal and Installation
INFOID:0000000006057681
REMOVAL
1.
Remove front passenger air bag module or instrument finisher D. Refer to
2.
Disconnect intake door cable from A/C control.
3.
Disconnect intake door cable from A/C unit assembly, and then remove intake door cable.
INSTALLATION
Install in the reverse order of removal.
INTAKE DOOR CABLE : Adjustment
INFOID:0000000006057682
1.
Remove front passenger air bag module or instrument finisher D. Refer to
1.
Heater unit assembly (with heater)
Ventilation unit assembly (with venti-
lation
2.
Plate
3.
Air mix door link 2 (with heater)
4.
Air mix door link 1 (with heatert)
5.
Air mix door cable (with heater)
6.
Intake door lever
7.
Intake door link
8.
Intake door cable
9.
Foot door lever
10. Mode door cable
11.
Main link
12. Ventilator door rod
13. Ventilator door lever
A.
To A/C control
JMIIA0594ZZ
DOOR CABLE
HAC-149
< REMOVAL AND INSTALLATION >
[HEATER AND VENTILATION]
C
D
E
F
G
H
J
K
L
M
A
B
HAC
N
O
P
2.
Disconnect intake door cable (1) from clamp (A).
3.
Set intake door lever to REC position.
4.
Push intake door link (2) in the direction shown by the arrow,
and then carefully pulling outer cable to A/C control side, and
connect clamp.
5.
Operate intake door lever to insure that inner cable moves smoothly.
CAUTION:
When clamping the outer cable, never move the inner cable.
MODE DOOR CABLE
MODE DOOR CABLE : Removal and Installation
INFOID:0000000006057683
REMOVAL
1.
Remove A/C unit assembly. Refer to
HA-42, "A/C UNIT ASSEMBLY : Removal and Installation"
.
2.
Disconnect mode door cable from A/C control.
3.
Disconnect mode door cable from A/C unit assembly, and then remove mode door cable.
INSTALLATION
Install in the reverse order of removal.
MODE DOOR CABLE : Adjustment
INFOID:0000000006057684
1.
Remove A/C unit assembly. Refer to
HA-42, "A/C UNIT ASSEMBLY : Removal and Installation"
.
2.
Disconnect mode door cable (1) from clamp (A).
3.
Set mode dial to VENT position.
4.
Push main link (2) in the direction shown by the arrow, and then
carefully pulling outer cable to A/C control side, and connect
clamp.
5.
Operate mode dial to insure that inner cable moves smoothly.
CAUTION:
When clamping the outer cable, never move the inner cable.
AIR MIX DOOR CABLE
AIR MIX DOOR CABLE : Removal and Installation
INFOID:0000000006057685
REMOVAL
1.
Remove foot duct LH. Refer to
VTL-6, "FOOT DUCT : Removal and Installation"
.
2.
Disconnect air mix door cable from A/C control.
3.
Disconnect air mix door cable from A/C unit assembly, and then remove air mix door cable.
INSTALLATION
Install in the reverse order of removal.
JMIIA0617ZZ
JMIIA0618ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст