Nissan March K13. Instruction — part 536
PG-132
< BASIC INSPECTION >
BATTERY INSPECTION
Work Procedure
INFOID:0000000005911875
OVERALL SEQUENCE
DETAILED FLOW
1.
VISUAL INSPECTION
1.
Check battery case for cracks or bends.
2.
Check battery terminals for damage.
JPMIA0184GB
PG
BATTERY INSPECTION
PG-133
< BASIC INSPECTION >
C
D
E
F
G
H
I
J
K
L
B
A
O
P
N
3.
If the difference between the max. and min. electrolyte level in cells is within 10 mm (0.39 in), it is OK.
Are these inspection results normal?
YES
>> GO TO 2.
NO
>> Replace battery.
2.
CHECKING SPECIFIC GRAVITY
Check specific gravity. Refer to
PG-130, "How to Handle Battery"
Inspection results
Above 1.220 (Test using battery checker)>>GO TO 3.
Above 1.220 (Test using load tester)>>GO TO 5.
1.100 - 1.220 (When performing quick charge)>>GO TO 7.
1.100 - 1.220 (When performing standard charge)>>GO TO 12.
Below 1.100>>GO TO 13.
3.
CAPACITY TEST
Test using battery checker.
Is the battery usable, according to the manufacturer’s instructions?
YES
>> Ready for use. Mount battery again and check loose terminals. Also check other related circuits.
NO
>> GO TO 4.
4.
QUICK CHARGE
1.
Perform quick charge. Time required: 45 min. Refer to
2.
Test using battery checker.
Is the battery usable, according to the manufacturer’s instructions?
YES
>> Ready for use.
NO
>> Replace battery.
5.
CAPACITY TEST
1.
Test using load tester.
2.
Check battery type and determine the specified current using the table.
Discharging Current (Load Tester)
3.
Read load tester voltage when specified discharging current flows through battery for 15 seconds.
Type
Current (A)
28B19L/R
90
34B19L/R
99
46B24L/R
135
55B24L/R
50D23L/R
150
55D23L/R
180
80D23L/R
195
65D26L/R
80D26L/R
75D31L/R
210
95D31L/R
240
115D31L/R
025 [YUASA type code]
027 [YUASA type code]
285
110D26L/R
300
95E41L/R
067 [YUASA type code]
325
130E41L/R
330
096 [YUASA type code]
375
PG-134
< BASIC INSPECTION >
BATTERY INSPECTION
Is the voltage 9.6 V or more?
YES
>> Ready for use.
NO
>> GO TO 6.
6.
QUICK CHARGE
1.
Perform quick charge. Time required: 45 min. Refer to
.
2.
Test using load tester.
Is the voltage 9.6 V or more?
YES
>> Ready for use.
NO
>> Replace battery.
7.
QUICK CHARGE
1.
Perform quick charge. Refer to
.
2.
Perform capacity test.
Test using battery checker.>>GO TO 8.
Test using load tester.>>GO TO 10.
8.
CAPACITY TEST
Test using battery checker.
Is the battery usable, according to the manufacturer’s instructions?
YES
>> Ready for use.
NO
>> GO TO 9.
9.
CHECKING SPECIFIC GRAVITY
1.
Check specific gravity. Refer to
PG-130, "How to Handle Battery"
2.
Perform recharge. Refer to
.
NOTE:
If battery temperature rises above 55
°
C (131
°
F), stop charging. Always charge battery when its tempera-
ture is below 55
°
C (131
°
F).
3.
Test using battery checker.
Is the battery usable, according to the manufacturer’s instructions?
YES
>> Ready for use.
NO
>> Replace battery.
10.
CAPACITY TEST
1.
Test using load tester.
2.
Check battery type and determine the specified current using the table.
Discharging Current (Load Tester)
Type
Current (A)
28B19L/R
90
34B19L/R
99
46B24L/R
135
55B24L/R
50D23L/R
150
55D23L/R
180
80D23L/R
195
65D26L/R
80D26L/R
75D31L/R
210
95D31L/R
240
115D31L/R
025 [YUASA type code]
PG
BATTERY INSPECTION
PG-135
< BASIC INSPECTION >
C
D
E
F
G
H
I
J
K
L
B
A
O
P
N
3.
Read load tester voltage when specified discharging current flows through battery for 15 seconds.
Is the voltage 9.6 V or more?
YES
>> Ready for use.
NO
>> GO TO 11.
11.
CHECKING SPECIFIC GRAVITY
1.
Check specific gravity. Refer to
PG-130, "How to Handle Battery"
2.
Perform recharge. Refer to
NOTE:
If battery temperature rises above 55
°
C (131
°
F), stop charging. Always charge battery when its tempera-
ture is below 55
°
C (131
°
F).
3.
Test using load tester.
Is the voltage 9.6 V or more?
YES
>> Ready for use.
NO
>> Replace battery.
12.
STANDARD CHARGE
NOTE:
“STANDARD CHARGE” is recommended if the vehicle is in storage after charging.
1.
Perform standard charge. Refer to
2.
Perform capacity test.
Test using battery checker.>>GO TO 14.
Test using load tester.>>GO TO 15.
13.
SLOW CHARGE
1.
Perform slow charge. Refer to
2.
Perform capacity test.
Test using battery checker.>>GO TO 14.
Test using load tester.>>GO TO 15.
14.
CAPACITY TEST
Test using battery checker.
Is the battery usable, according to the manufacturer’s instructions?
YES
>> Ready for use.
NO
>> Replace battery.
15.
CAPACITY TEST
1.
Test using load tester.
2.
Check battery type and determine the specified current using the table.
Discharging Current (Load Tester)
027 [YUASA type code]
285
110D26L/R
300
95E41L/R
067 [YUASA type code]
325
130E41L/R
330
096 [YUASA type code]
375
Type
Current (A)
Type
Current (A)
28B19L/R
90
34B19L/R
99
46B24L/R
135
55B24L/R
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст