Nissan March K13. Instruction — part 564
FRONT SEAT
SE-17
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
K
L
M
A
B
SE
N
O
P
Install the hog rings of seatback trim in position, and then securely connect the trim or trim cord with
the pad side wire.
SEAT CUSHION
Disassembly
1.
Remove the seat cushion outer finisher.
1.
Remove the pawls, and then lifter lever knob cap (1). (seat
with lifter only)
2.
Remove the mounting screw, and remove the lifter lever (2).
(seat with lifter only)
3.
Pull snap ring (1) downward, and remove reclining lever
knob (2) from seat frame assembly with hook and picktool.
4.
Remove the metal clips and mounting screw (A), and then
pull out seat cushion outer finisher.
2.
Remove the seat cushion inner finisher.
1.
Remove the seat belt buckle. Refer to
SB-8, "SEAT BELT BUCKLE : Removal and Installation"
2.
Remove the pawls and mounting screw (A), and then
remove seat cushion inner finisher.
3.
Remove the seat cushion trim and seat cushion pad.
: Pawl
JMJIA3939ZZ
JMJIA3940ZZ
: Metal clip
JMJIA3941ZZ
: Pawl
JMJIA3942ZZ
SE-18
< REMOVAL AND INSTALLATION >
FRONT SEAT
Seat with lifter
1.
Remove mounting bolts of seat cushion frame. Remove seat cushion assembly from seat frame
assembly.
2.
Remove seat cushion trim that is hooked on seat cushion frame. Remove seat cushion and seat
cushion pad.
3.
Remove the hog rings, and separate the seatback trim and seatback pad.
Seat without lifter
1.
Remove the hog rings, and separate the seat frame assembly and seat cushion assembly.
2.
Remove the hog rings, and separate the seatback trim and seatback pad.
Assembly
Assemble in the reverse order of disassembly.
CAUTION:
Install the hog rings of seat cushion trim in position, and then securely connect the trim or trim cord
with the pad side wire.
REAR SEAT
SE-19
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
K
L
M
A
B
SE
N
O
P
REAR SEAT
Exploded View
INFOID:0000000005984507
Removal and Installation
INFOID:0000000005984508
REMOVAL
CAUTION:
When removing and installing, use shop cloths to protect parts from damage.
1.
Release U-shaped wire from seat cushion hook that is located on front of seat cushion.
2.
Remove seat belt from slot that is located in rear side of seat cushion.
3.
Fold seatback forward.
1.
Seatback trim
2.
Seatback pad
3.
Back side bracket assembly (RH)
4.
Seat lock assembly (RH)
5.
Seatback frame
6.
Striker assembly (RH)
7.
Seat cushion trim
8.
Seat cushion pad
9.
Seat cushion hook
10. Striker assembly (LH)
11.
Seat lock assembly (LH)
12. Back side bracket assembly (LH)
13. Seatback silencer
Refer to
JMJIA3868GB
SE-20
< REMOVAL AND INSTALLATION >
REAR SEAT
4.
Roll up seatback trim (A). Remove mounting bolts (B) of seat-
back frame and back side bracket assembly. Remove back side
bracket assembly from seatback frame.
5.
Put seatback on seat cushion and remove them together from the vehicle.
6.
Remove mounting bolts of back side bracket assembly. Remove back side bracket assembly from the
vehicle.
7.
Remove the striker assembly.
1.
Remove the luggage side lower finisher. Refer to
INT-32, "LUGGAGE SIDE LOWER FINISHER :
.
2.
Remove the striker assembly mounting bolts.
INSTALLATION
1.
Install in the reverse order of removal.
CAUTION:
When removing and installing, use shop cloths to protect parts from damage.
2.
Tighten mounting bolts of seatback (1) in numerical order as per
the following figure.
Disassembly and Assembly
INFOID:0000000005984509
SEATBACK
Disassembly
1.
Remove the seatback trim and seatback pad.
1.
Remove the seatback retainers (A).
2.
Remove the seatback trim and seatback pad from seatback frame.
3.
Remove the hog rings to separate the seatback trim and seatback pad.
2.
Remove the seatback silencer.
3.
Remove the seat lock assembly.
JMJIA3945ZZ
JMJIA4119ZZ
JMJIA3946ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст