Nissan March K13. Instruction — part 43
BRAKE FLUID LEVEL SWITCH
BRC-3
< DTC/CIRCUIT DIAGNOSIS >
[WITHOUT ABS]
C
D
E
G
H
I
J
K
L
M
A
B
BRC
N
O
P
DTC/CIRCUIT DIAGNOSIS
BRAKE FLUID LEVEL SWITCH
Component Function Check
INFOID:0000000006037678
1.
CHECK BRAKE FLUID LEVEL SWITCH OPERATION
When the brake fluid is full or empty.
Then check that the brake warning lamp in the combination meter turns
ON/OFF correctly.
Is the inspection result normal?
YES
>> INSPECTION END
NO
>> Proceed to diagnosis procedure. Refer to
Diagnosis Procedure
INFOID:0000000006034868
1.
CHECK THE BRAKE FLUID LEVEL
Check the brake fluid level. Refer to
.
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Refill the brake fluid. Refer to
.
2.
CHECK BRAKE FLUID LEVEL SWITCH CIRCUIT
1.
Check continuity between brake fluid level switch harness connector and combination meter harness con-
nector.
2.
Check continuity between brake fluid level switch harness connector and ground.
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> Repair or replace error-detected parts.
3.
CHECK BRAKE FLUID LEVEL SWITCH GROUND CIRCUIT
Check continuity between brake fluid level switch harness connector and ground.
Is the inspection result normal?
YES
>> GO TO 4.
NO
>> Repair or replace error-detected parts.
4.
CHECK BRAKE FLUID LEVEL SWITCH
Condition
Brake warning lamp illumination status
When the brake fluid is empty in the reservoir tank.
ON
When the brake fluid is full in the reservoir tank.
OFF
Brake fluid level switch
Combination meter
Continuity
Connector
Terminal
Connector
Terminal
E37
1
M34
36
Existed
Brake fluid level switch
—
Continuity
Connector
Terminal
E37
1
Ground
Not existed
Brake fluid level switch
—
Continuity
Connector
Terminal
E37
2
Ground
Existed
BRC-4
< DTC/CIRCUIT DIAGNOSIS >
[WITHOUT ABS]
BRAKE FLUID LEVEL SWITCH
Check brake fluid level switch. Refer to
.
Is the inspection result normal?
YES
>> GO TO 5.
NO
>> Replace reservoir tank. Refer to
BR-26, "Disassembly and Assembly"
5.
CHECK TERMINALS AND HARNESS CONNECTORS
1.
Check brake fluid level switch pin terminals for damage or loose connection with harness connector.
2.
Check combination meter pin terminals for damage or loose connection with harness connector.
Is the inspection result normal?
YES
>> Check the combination meter. Refer to
.
NO
>> Repair or replace error-detected parts.
Component Inspection
INFOID:0000000006034869
1.
CHECK BRAKE FLUID LEVEL SWITCH
1.
Turn the ignition switch OFF.
2.
Disconnect brake fluid level switch harness connector.
3.
Check continuity between brake fluid level switch harness connector.
Is the inspection result normal?
YES
>> INSPECTION END
NO
>> Replace reservoir tank. Refer to
BR-26, "Disassembly and Assembly"
Brake fluid level switch
Condition
Continuity
Terminal
1
−
2
When brake fluid is full in the reservoir tank.
Not existed
When brake fluid is empty in the reservoir tank.
Existed
PARKING BRAKE SWITCH
BRC-5
< DTC/CIRCUIT DIAGNOSIS >
[WITHOUT ABS]
C
D
E
G
H
I
J
K
L
M
A
B
BRC
N
O
P
PARKING BRAKE SWITCH
Component Function Check
INFOID:0000000006037679
1.
CHECK PARKING BRAKE SWITCH OPERATION
Operate the parking brake lever. Then check that the brake warning lamp in the combination meter turns ON/
OFF correctly.
Is the inspection result normal?
YES
>> INSPECTION END
NO
>> Proceed to diagnosis procedure. Refer to
Diagnosis Procedure
INFOID:0000000006034870
1.
CHECK PARKING BRAKE SWITCH CIRCUIT
1.
Turn the ignition switch OFF.
2.
Disconnect parking brake switch harness connector.
3.
Disconnect combination meter harness connector.
4.
Check continuity between parking brake switch harness connector and combination meter harness con-
nector.
5.
Check continuity between parking brake switch harness connector and ground.
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Repair or replace error-detected parts.
2.
CHECK PARKING BRAKE SWITCH
Check the parking brake switch. Refer to
.
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> Replace parking brake switch. Refer to
PB-3, "Removal and Installation"
.
3.
CHECK TERMINALS AND HARNESS CONNECTORS
1.
Check parking brake switch pin terminals for damage or loose connection with harness connector.
2.
Check combination meter pin terminals for damage or loose connection with harness connector.
Is the inspection result normal?
YES
>> Check combination meter. Refer to
NO
>> Repair or replace error-detected parts.
Component Inspection
INFOID:0000000006034871
1.
CHECK PARKING BRAKE SWITCH
1.
Turn the ignition switch OFF.
Condition
Brake warning lamp illumination status
When the parking brake switch is operation
ON
When the parking brake switch is not operation.
OFF
Parking brake switch
Combination meter
Continuity
Connector
Terminal
Connector
Terminal
M11
1
M34
37
Existed
Parking brake switch
—
Continuity
Connector
Terminal
M97
1
Ground
Not existed
BRC-6
< DTC/CIRCUIT DIAGNOSIS >
[WITHOUT ABS]
PARKING BRAKE SWITCH
2.
Disconnect parking brake switch harness connector.
3.
Check continuity between parking brake switch harness connector.
Is the inspection result normal?
YES
>> INSPECTION END
NO
>> Replace parking brake switch. Refer to
PB-3, "Removal and Installation"
Parking brake switch
—
Condition
Continuity
Terminal
When the parking brake switch is operated.
Existed
1
Ground
When the parking brake switch is not operated.
Not existed
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст