Nissan Primera P12. Instruction — part 655
PG-22
POWER SUPPLY ROUTING
MAWA1169E
POWER SUPPLY ROUTING
PG-23
C
D
E
F
G
H
I
J
L
M
A
B
PG
Fuse
EKS00A09
●
If fuse is blown, be sure to eliminate cause of incident before
installing new fuse.
●
Use fuse of specified rating. Never use fuse of more than speci-
fied rating.
●
Do not partially install fuse; always insert it into fuse holder prop-
erly.
●
Remove fuse for “ELECTRICAL PARTS (BAT)” if vehicle is not
used for a long period of time.
Fusible Link
EKS00A0A
A melted fusible link can be detected either by visual inspection or by
feeling with finger tip. If its condition is questionable, use circuit
tester or test lamp.
CAUTION:
●
If fusible link should melt, it is possible that critical circuit
(power supply or large current carrying circuit) is shorted.
In such a case, carefully check and eliminate cause of inci-
dent.
●
Never wrap outside of fusible link with vinyl tape. Important:
Never let fusible link touch any other wiring harness, vinyl
or rubber parts.
Circuit Breaker
EKS00A0B
The PTC thermistor generates heat in response to current flow. The
temperature (and resistance) of the thermistor element varies with
current flow. Excessive current flow will cause the element's temper-
ature to rise. When the temperature reaches a specified level, the
electrical resistance will rise sharply to control the circuit current.
Reduced current flow will cause the element to cool. Resistance falls
accordingly and normal circuit current flow is allowed to resume.
CEL083
CKWA0098E
SEL109W
PG-24
GROUND
GROUND
PFP:00011
Ground Distribution
EKS00A0C
MAIN HARNESS
MAWA1174E
GROUND
PG-25
C
D
E
F
G
H
I
J
L
M
A
B
PG
MAWA1175E
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст