Nissan Primera P12. Instruction — part 577
LT-18
HEADLAMP (WITH DAYTIME) - CONVENTIONAL TYPE -
HEADLAMP (WITH DAYTIME) - CONVENTIONAL TYPE -
PFP:26010
System Description
EKS009LY
DESCRIPTION
The headlamp system for Northern Europe vehicles contains a daytime light control unit that activates the low
beam headlamps whenever the engine is running.
Power is supplied at all times
●
to daytime light control unit terminal 1
●
to lighting switch terminal 11
●
through 10A (No. 32, located in the fuse and fusible link box), and
●
to daytime light control unit terminal 3
●
to lighting switch terminal 5
●
through 15A (No. 42, located in the fuse and fusible link box), and
●
to daytime light control unit terminal 2
●
to lighting switch terminal 8
●
through 15A (No. 41, located in the fuse and fusible link box)
Ground is supplied to daytime light control unit terminal 9 through body grounds E10 and E58.
When the ignition switch is in the ON or START position, power is supplied (F9Q engine models)
●
to daytime light control unit terminal 7
●
through 10A (No. 10, located in the fuse and fusible link box)
●
to daytime light control unit terminal 6
●
through 10A (No. 21, located in the fuse and fusible link box)
HEADLAMP OPERATION (DAYTIME CANCEL OPERATION)
For description, refer to
.
When the lighting switch is turn to 1st or 2nd position, power is supplied
●
through lighting switch terminal 12
●
to daytime light control unit terminal 11
Then daytime light will be canceled. And the lighting system operation will be the same as no daytime unit.
DAYTIME LIGHT OPERATION
When the engine running, the lighting switch in the OFF position, power is supplied
●
from alternator terminal 3
●
to daytime light control unit terminal 8 and
●
from daytime light control unit terminal 2
●
through daytime light control unit terminal 5
●
to terminal 5 of LH headlamp, and
●
from daytime light control unit terminal 3,
●
through daytime light control unit terminal 4
●
to terminal 5 of RH headlamp and
●
from daytime light control unit terminal 1
●
through daytime light control unit terminal 10
Ground is supplied to terminal 3 of each headlamp through body grounds E10 and E58.
HEADLAMP (WITH DAYTIME) - CONVENTIONAL TYPE -
LT-19
C
D
E
F
G
H
I
J
L
M
A
B
LT
Schematic
EKS009LZ
MKWA1088E
LT-20
HEADLAMP (WITH DAYTIME) - CONVENTIONAL TYPE -
Wiring Diagram — DTRL —
EKS009M0
EXCEPT FOR F9Q ENGINE MODELS
MKWA1089E
HEADLAMP (WITH DAYTIME) - CONVENTIONAL TYPE -
LT-21
C
D
E
F
G
H
I
J
L
M
A
B
LT
FOR F9Q ENGINE MODELS
MKWA1090E
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст