Nissan Primera P12. Instruction — part 533
LAN-44
[CAN]
CAN SYSTEM (TYPE 23)
Work Flow
EKS00AQU
1.
Print all the data of “SELF-DIAG RESULTS” and “DATA MONITOR” for “ENGINE”, “ABS”, “SMART
ENTRANCE”, and “AIR PRESSURE MONITOR” displayed on CONSULT-II. Refer to the following:
●
EC-83, "DTC U1000 CAN COMMUNICATION LINE"
for “ENGINE”
●
BRC-25, "CAN Communication Circuit"
for “ABS”
●
BCS-23, "CAN Communication Line Check"
for “SMART ENTRANCE”
●
WT-23, "Inspection 4: CAN Communication Line"
for “AIR PRESSURE MONITOR”
2.
Attach the printed sheet of “SELF-DIAG RESULTS” and “DATA MONITOR” onto the check sheet. Refer to
3.
Based on the data monitor results, put “v” marks onto the items with “UNKWN” or “NG” in the check sheet
table. Refer to
NOTE:
If “NG” is displayed on “CAN COMM” for the diagnosed control unit, replace the control unit.
4.
According to the check sheet results (example), start inspection. Refer to
CAN SYSTEM (TYPE 23)
LAN-45
[CAN]
C
D
E
F
G
H
I
J
L
M
A
B
LAN
CHECK SHEET
PKIA0727E
LAN-46
[CAN]
CAN SYSTEM (TYPE 23)
CHECK SHEET RESULTS (EXAMPLE)
PKIA0728E
CAN SYSTEM (TYPE 23)
LAN-47
[CAN]
C
D
E
F
G
H
I
J
L
M
A
B
LAN
NOTE:
If “NG” is displayed on “CAN COMM” for the diagnosed control unit, replace the control unit.
PKIA0729E
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст