Nissan Primera P12. Instruction — part 459
EM-182
[F9Q]
OVERHAUL
39. Install the cylinder head suspended mounting.
40. Tighten two bolts.
41. Change the washer (1) under the injector.
NOTE:
In order to install the high pressure pipe correctly, it is vital that
the following installing sequence be complied with.
42. Install the injector.
43. Install the injector bracket without blocking them.
44. Install the two rail bolt without blocking them.
45. Install the new diesel return pipe.
46. Tighten the injector flange.
47. Install the high-pressure pipe.
: 35 N·m (3.6 kg-m, 26 ft-lb)
MBIB0982E
: 30 N·m (3.1 kg-m, 22 ft-lb)
MBIB0985E
MBIB0748E
MBIB0749E
: 20 N·m (2.0 kg-m, 15 ft-lb)
MBIB0750E
OVERHAUL
EM-183
[F9Q]
C
D
E
F
G
H
I
J
K
L
M
A
EM
48. Tighten the high-pressure pipe nuts at the injector end.
49. Tighten the high-pressure pipe nuts at the rail end.
50. Tighten the rail tightening bolt.
51. Tighten the pump/rail high-pressure pipe.
Disassembly The Lower Engine
EBS00SBP
DIASSEMBLY
1.
Engine installed with a water pump driven by the timing belt.
2.
Remove the power steering pump.
3.
Remove the idler pulley by removing bolt (1).
: 25 N·m (2.6 kg-m, 18 ft-lb)
: 25 N·m (2.6 kg-m, 18 ft-lb)
: 22 N·m (2.2 kg-m, 16 ft-lb)
: 25 N·m (2.6 kg-m, 18 ft-lb)
MBIB0752E
EM-184
[F9Q]
OVERHAUL
4.
Remove the alternator.
5.
Remove the A/C compressor.
6.
Remove the alternator bracket.
MBIB0753E
MBIB0754E
MBIB0755E
OVERHAUL
EM-185
[F9Q]
C
D
E
F
G
H
I
J
K
L
M
A
EM
7.
Remove the oil separator.
8.
Remove the oil filter.
9.
Remove the oil cooler.
10. Remove the oil pressure switch.
11. Remove the oil level sensor.
12. Remove the coolant hose.
13. Remove the water pump inlet pipe.
14. Remove the clutch.
Checking the Flywheel and Friction Face
●
It is essential to change the flywheel is the contact surface is
“bluish” or if the friction face is “worn out”.
15. Position Tool KV113B0060 (Mot. 582-01) or KV113B0410 (Mot.
1677).
16. Remove the flywheel mounting bolts (these bolts must be
replaced).
17. Remove the flywheel.
Special Notes Concerning Engines Installed With a Flexible Flywheel
●
Under no circumstances should the bolts (A) be removed.
MBIB0756E
MBIB0757E
MBIB0758E
MBIB0759E
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст