Nissan Primera P12. Instruction — part 553
LAN-124
[CAN]
CAN SYSTEM (TYPE 28)
MKWA1736E
CAN SYSTEM (TYPE 28)
LAN-125
[CAN]
C
D
E
F
G
H
I
J
L
M
A
B
LAN
Work Flow
EKS00B6F
1.
When there are no indications of “ENGINE” display of CONSULT-II, print the “SELECT SYSTEM”.
2.
Print all the data of “SELF-DIAG RESULTS” and “DATA MONITOR” for “ENGINE”, “ABS”, “SMART
ENTRANCE”, and “AIR PRESSURE MONITOR” displayed on CONSULT-II. Refer to the following:
●
EC-F9Q-136, “CAN Communication” for “ENGINE”
●
BRC-25, "CAN Communication Circuit"
for “ABS”
●
BCS-23, "CAN Communication Line Check"
for “SMART ENTRANCE”
3.
Attach the printed sheet of “SELF-DIAG RESULTS” and “DATA MONITOR” onto the check sheet. Refer to
4.
Based on the data monitor results, put “v” marks onto the items with “UNKWN” or “NG” in the check sheet
table. Refer to
NOTE:
If “NG” is displayed on “CAN COMM” for the diagnosed control unit, replace the control unit.
5.
According to the check sheet results (example), start inspection. Refer to
LAN-126
[CAN]
CAN SYSTEM (TYPE 28)
CHECK SHEET
MKIB0678E
CAN SYSTEM (TYPE 28)
LAN-127
[CAN]
C
D
E
F
G
H
I
J
L
M
A
B
LAN
MKIB0679E
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст