Nissan Versa Sedan. Instruction — part 433
EXT-18
< REMOVAL AND INSTALLATION >
UNDER COVER
UNDER COVER
Exploded View
INFOID:0000000009268552
1.
Front bumper side bracket (RH)
2.
Front bumper reinforcement
3.
Front bumper energy absorber
4.
Front bumper fascia finisher (RH)
(If equipped)
5.
Front bumper fascia
6.
Fog lamp finisher (RH) (if
equipped)
7.
Tow cover
8.
License plate bracket
9.
Under cover
10. Fog lamp finisher (LH) (if
equipped)
11.
Front bumper fascia finisher (LH)
(if equipped)
12. Front bumper side bracket (LH)
AWKIA2508ZZ
UNDER COVER
EXT-19
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
J
L
M
A
B
EXT
N
O
P
Removal and Installation
INFOID:0000000009268553
REMOVAL
1. Remove air spoiler clips and air spoiler.
2. Remove under cover screws and clips.
3. Remove under cover.
INSTALLATION
Installation is in the reverse order of removal.
13. Front spoiler
A.
Spring nut
B.
Screw grommet
Pawl
EXT-20
< REMOVAL AND INSTALLATION >
REAR BUMPER
REAR BUMPER
Exploded View
INFOID:0000000009268554
Removal and Installation
INFOID:0000000009268555
REMOVAL
CAUTION:
Bumper fascia is made of resin. Do not apply strong force to it, and be careful to prevent contact with
oil.
1. Remove rear combination lamps (LH/RH). Refer to
EXL-109, "Removal and Installation"
.
1.
Rear bumper side brackets (LH)
2.
Rear bumper closing (LH)
3.
Rear bumper fascia
4.
Rear bumper closing (RH)
5.
Rear bumper side brackets (RH)
6.
Rear bumper reinforcement
A.
Screw grommet
AWKIA1858ZZ
REAR BUMPER
EXT-21
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
J
L
M
A
B
EXT
N
O
P
2. Remove clips (A) and screws (B) (LH/RH).
3. Remove rear bumper fascia lower clips.
4. Remove rear bumper fascia end screws (A).
5. Pull rear bumper fascia away as shown by the arrows in the
illustration and then disengage the rear bumper fascia from rear
bumper side brackets (LH/RH).
: Pawl
6. Remove rear bumper fascia.
CAUTION:
When removing bumper fascia assembly, two people are required to avoid damaging.
7. Remove the following parts after removing rear bumper fascia.
• Rear bumper side brackets (LH/RH)
8. Remove rear bumper reinforcement nuts and rear bumper reinforcement.
9. Remove rear bumper closing clips and rear bumper closings (LH/RH).
INSTALLATION
Installation is in the reverse order of removal.
NOTE:
• The following table shows the specified values for checking normal installation specifications.
JMKIA8020ZZ
JMKIA8021ZZ
JMKIA8022ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст