Nissan Versa Sedan. Instruction — part 529
IP-20
< REMOVAL AND INSTALLATION >
INSTRUMENT LOWER PANEL LH
INSTRUMENT LOWER PANEL LH
Removal and Installation
INFOID:0000000009266854
REMOVAL
1. Remove data link connector from instrument lower panel LH.
2. Remove hood and fuel filler handle assembly bolts (A) and posi-
tion hood and fuel filler handle assembly aside.
3. Remove instrument lower panel LH. Refer to
a. Release instrument lower panel LH by using a suitable tool to release the pawls and metal clips and pull-
ing rearward.
CAUTION:
Disengage pawls and metal clips slowly so that they are not damaged.
b. Disconnect harness connectors from instrument lower panel LH and remove.
INSTALLATION
Installation is in the reverse order of removal.
JMKIA7998ZZ
CLUSTER LID C
IP-21
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
K
L
M
A
B
IP
N
O
P
CLUSTER LID C
Removal and Installation
INFOID:0000000009266855
REMOVAL
1. Release the metal clips using a suitable tool (A), beginning in
the lower left corner of cluster lid C and working in a counter-
clockwise direction.
: Metal clip
2. Reposition cluster lid C to access harness connectors.
3. Disconnect harness connectors from cluster lid C and remove.
INSTALLATION
Installation is in the reverse order of removal.
JMJIA6055ZZ
IP-22
< REMOVAL AND INSTALLATION >
GLOVE BOX ASSEMBLY AND HOUSING
GLOVE BOX ASSEMBLY AND HOUSING
Removal and Installation
INFOID:0000000009266856
REMOVAL
1. Remove glove box lid.
a. Open glove box lid.
b. Pull glove box lid rearward and glove box lid hinges down and
rearward to disengage, then remove the glove box lid.
c.
Disconnect glove box damper (if equipped).
2. Remove glove box assembly.
a. Remove glove box assembly screws (A).
b. Pull glove box assembly rearward to disengage pawls and
remove glove box assembly.
: Pawl
INSTALLATION
Installation is in the reverse order of removal.
JMJIA6060ZZ
AWJIA0714ZZ
CENTER CONSOLE ASSEMBLY
IP-23
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
K
L
M
A
B
IP
N
O
P
CENTER CONSOLE ASSEMBLY
Exploded View
INFOID:0000000009266857
Removal and Installation
INFOID:0000000009266858
REMOVAL
1. Move shift selector to “N” position (CVT models or A/T models).
2. Remove shift selector handle and console boot (M/T models).
3. Raise parking brake lever.
4. Remove center console assembly clips (A).
5. Remove the center console assembly rear screws.
6. Slide front seat (RH) all the way rearward and place in fully reclined position.
7. Slide front seat (LH) all the way forward and tilt seatback to the full forward position.
1.
M/T console boot (M/T models)
2.
Center console assembly
AWJIA0694ZZ
JMJIA6093ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст